Le test Microsoft 70-545 peut bien examnier les connaissances et techniques professionnelles. Pass4Test est votre raccourci amené au succès de test Microsoft 70-545. Chez Pass4Test, vous n'avez pas besoin de dépenser trop de temps et d'argent juste pour préparer le test Microsoft 70-545. Travaillez avec l'outil formation de Pass4Test visé au test, il ne vous demande que 20 heures à préparer.
Pass4Test est un site particulier d'offrir la formation à propos de test Certification IT. C'est un bon choix pour vous aider à réussir le test Microsoft 70-545. Pass4Test offre toutes les informations et les documentations plus nouvelles qui peut vous donner plus de chances à réussir le test.
Le test de Certification Microsoft 70-545 devient de plus en plus chaud dans l'Industrie IT. En fait, ce test demande beaucoup de travaux pour passer. Généralement, les gens doivent travailler très dur pour réussir.
Choisir le Pass4Test vous permet non seulement à réussir le test Microsoft 70-545, mais encore à enjouir le service en ligne 24h et la mise à jour gratuite pendant un an. Nous allons lancer au premier temps la Q&A Microsoft 70-545 plus nouvelle. Si vous ne passez pas le test, votre argent sera tout rendu.
Code d'Examen: 70-545
Nom d'Examen: Microsoft (TS: Microsoft Visio 2007, Application)
Questions et réponses: 86 Q&As
Pass4Test est un bon catalyseur du succès pour les professionnels IT. Beaucoup de gens passer le test Microsoft 70-545 avec l'aide de l'outil formation. Les experts profitent leurs expériences riches et connaissances à faire sortir la Q&A Microsoft 70-545 plus nouvelle qui comprend les exercices de pratiquer et le test simulation. Vous pouvez passer le test Microsoft 70-545 plus facilement avec la Q&A de Pass4Test.
70-545 Démo gratuit à télécharger: http://www.pass4test.fr/70-545.html
NO.1 You need to develop an Office Visio 2007 solution for 1,000 computers that run Visio 2007.
The solution must meet the following requirements:
The solution must not require the installation of additional components, tools, or DLLs. Users
must be able to customize the solution without installing additional development tools.
What should you develop?
A. A template and a Visio Solutions Library (VSL)
B. A custom stencil that uses ShapeSheet programming
C. A Windows Forms application that contains the Visio Drawing Control
D. A solution by using Microsoft Visual Studio 2005 Tools for Office Second Edition
Answer: B
certification Microsoft 70-545 70-545 examen 70-545 70-545 examen 70-545
NO.2 You are developing an Office Visio 2007 Shared Add-in. You create three objects named objMaster, objPage, and objWindow. The object objMaster references a local copy of the master. The object objPage references the current page. The object objWindow references the active window. You need to create several shape instances of the master on the current page at specific coordinates in the active window. Which method should you use?
A. objPage.Drop()
B. objPage.DropMany()
C. objWindow.CreateSelection()
D. objMaster.Shapes.Item(1).Copy() objPage.Paste()
Answer: B
certification Microsoft 70-545 examen 70-545 examen
NO.3 You are creating an application that will be used to connect two two-dimensional (2-D) shapes by using a Dynamic Connector shape. In your application, you create an object named myVisioApp that references the Visio Application object. You need to add code to your application to connect the 2-D shapes. What code should you add?
A. myVisioApp.Active P age.Shapes(1). Cells(PinX). GlueTo( myVisioApp.Active P age.Shapes(2) .Cells(PinX) )
B. myVisioApp.Active P age. Shapes(1).Cells(BeginX).GlueTo myVisioApp.ActivePage.Shapes(2).Cells(Connections.X1)
C. myVisioApp.Active P age.Shapes(1).AutoConnect( myVisioApp.Active P age.Shapes(2), visAutoConnectDirNone)
D. myVisioApp.Active P age.Shapes(1).AutoConnect( myVisioApp.Active P age.Shapes( 1 ) , visAutoConnectDirRight )
Answer: C
Microsoft 70-545 70-545 examen certification 70-545 certification 70-545 70-545
NO.4 You plan to create an Office Visio 2007 application. You need to prevent Visio 2007 from failing in the event that there is a fault in the application. What are three possible ways to achieve this goal? (Each correct answer presents a complete solution. Choose three.)
A. CreateaVBAsolution.
B. CreateaVSLsolution.
C. Create an EXE add-on solution.
D. CreateaSharedAdd-insolution,andthenusetheCOMShimWizardtocreateaDLL.
E. Create a Shared Add-in solution by using Microsoft Visual Studio 2005 Tools for Office Second Edition.
Answer: CDE
certification Microsoft certification 70-545 70-545
NO.5 You are developing an Office Visio 2007 Shared Add-in. You need to modify the add-in to perform an action after the Visio 2007 application flushes its events queue. What should you do?
A. ListenforAppDeactivated.
B. Listen for RunModeEntered.
C. Listen for MustFlushScopeBeginning.
D. Queue a MarkerEvent and then listen for a MarkerEvent.
Answer: D
Microsoft 70-545 70-545 70-545 70-545
NO.6 You are developing an Office Visio 2007 Shared Add-in. You need to prevent shape deletions by using custom logic. What should you do?
A. Configure the add-in to listen to the QueryCancelPageDelete event of the Visio 2007 application.
B. Configure the add-in to listen to the QueryCancelSelectionDelete event of the Visio 2007 application.
C. Configure the add-in to listen to the BeforeShapeDelete event of the Visio 2007 application.
D. Configure the add-in to listen to the BeforeSelectionDelete event of the Visio 2007 application.
Answer: B
Microsoft 70-545 70-545 examen 70-545
NO.7 You are developing an Office Visio 2007 SharedAdd-in.
You construct an event sink class that listens to events from the Visio 2007 Application,
Document, Page, and Shape objects. The VisEventProc function has the following signature:
Public Function VisEventProc(
ByVal eventCodeAs Short,
ByVal sourceAs Object,
ByVal eventIdAs Integer,
ByVal eventSequenceNumberAs Integer,
ByVal subjectAs Object,
ByVal moreInformationAs Object)As Object
You need to construct a switch to identify the object that raised the event.
Which parameter should you use?
A. eventCode
B. moreInformation
C. source
D. subject
Answer: C
Microsoft 70-545 examen certification 70-545 certification 70-545
NO.8 You are developing an Office Visio 2007 Shared Add-in. You create an object named objShape that references a new shape. You need to modify the add-in to identify the shape if the shape is moved to a different page. Which property of objShape should you reference?
A. ID
B. Name
C. NameID
D. UniqueID(visGetOrMakeGUID)
Answer: D
Microsoft 70-545 70-545
NO.9 You have a Windows Forms application that contains an embedded Visio Drawing Control.
You have an Office Visio 2007 drawing saved as C:\Template.vsd. You need to configure the
application to load and display the drawing as a template by using the Visio Drawing Control.
Which code should you add to the application?
A. Me.axDrawingControl1. Document.Application.Documents.Open( "C:\Template.VSD ")
B. Me.axDrawingControl1.Window.Application.Documents.Open( " C:\Template.VSD " )
C. Me.axDrawingControl1.Src = " C:\Template.VSD "
D. Dim openDockedFlag As Short = CShort(Visio.VisOpenSaveArgs.visOpenDocked) Me.axDrawingControl1.Window.Application.Documents. OpenEx("C:\Template.VSD",openDockedFlag)
Answer: C
Microsoft examen 70-545 70-545 examen
NO.10 You create a custom template and several custom stencils. You need the stencils to open automatically when a new file is created from the template. What should you do?
A. Deploy the stencils to the My Shapes folder.
B. Deploy the stencils to the same folder as the template.
C. Dock the stencils in the template workspace, and then save the template.
D. Modify the Office Visio 2007 application settings to contain the path to the stencils.
Answer: C
certification Microsoft 70-545 70-545
Si vous vous inscriez le test Microsoft 70-545, vous devez choisir une bonne Q&A. Le test Microsoft 70-545 est un test Certification très important dans l'Industrie IT. C'est essentielle d'une bonne préparation avant le test.
没有评论:
发表评论