Pass4Test vous offre un choix meilleur pour faire votre préparation de test HP HP0-Y35 plus éfficace. Si vous voulez réussir le test plus tôt, il ne faut que ajouter la Q&A de HP HP0-Y35 à votre cahier. Pass4Test serait votre guide pendant la préparation et vous permet à réussir le test HP HP0-Y35 sans aucun doute. Vous pouvez obtenir le Certificat comme vous voulez.
Pass4Test possède une grande équipe composée des experts IT qui travaillent dur avec leurs riches expériences et connaissances pour produire un bon outil de formation. Selon les anciens test, le test simulation de Pass4Test est bien lié avec le test réel. Pass4Test peut vous assurer à réussir le test. Maintenant vous ajoutez votre outil de formation au panier, et votre rêve réalisera bien tôt.
Code d'Examen: HP0-Y35
Nom d'Examen: HP (Wireless Networks - ASE 2011 Delta Exam)
Questions et réponses: 75 Q&As
Bien qu'Il y ait plein de talentueux dans cette société, il manque beaucoup de professionnels dans les domaine en cours de développement, l'Industrie IT est l'un de ces domaines. Donc le test HP HP0-Y35 est un bon l'examination de technique informatique. Pass4Test est un site d'offrir la formation particulière au test HP HP0-Y35.
Choisissez le Pass4Test, choisissez le succès de test HP HP0-Y35. Bonne chance à vous.
HP0-Y35 Démo gratuit à télécharger: http://www.pass4test.fr/HP0-Y35.html
NO.1 Click the Exhibit button.
A network administrator is managing an HP A-Series Wireless Access Controller at the command
line interface (CLI). The administrator issues a command to view the contents of the controller
flash directory. Looking at the output, which access point models can the controller boot and
command to view the contents of the controller? flash directory. Looking at the output, which
access point models can the controller boot and manage? (Select two.)
A. HP WA2220-AG
B. HP WA2612-AGN
C. HP WA2620-AGN
D. HP WA2610E-AGN
E. HP WA2620E-AGN
Answer: B,C
HP examen HP0-Y35 HP0-Y35 HP0-Y35 HP0-Y35
NO.2 Given an HP A5800 switch that is in its factory default configuration, what happens after the
following command sequence? (Note: There is no save command.) system-view irf member 1
renumber 2 quit reboot
A. The IRF member ID will be 1.
B. The IRF member ID will be 2.
C. The IRF member ID will be assigned dynamically.
D. The IRF member ID will be "unknown."
Answer: B
HP HP0-Y35 HP0-Y35 HP0-Y35
NO.3 Which protocols/technologies can be used to implement IRF MAD? (Select two.)
A. NSF/GR
B. ICMP
C. IGMP
D. BFD
E. LACP
Answer: D,E
HP examen certification HP0-Y35 HP0-Y35 certification HP0-Y35
NO.4 Click the Exhibit button.
You have been asked to configure the switching engine of an HP A3000-24G PoE+ Wireless
Switch. First, you log in to the CLI of the access controller and then move to the System view. You
then attempt to issue the partial command oap co and use the Tab key to complete it. However,
the CLI does not complete the command but issues a line return instead, as shown in the exhibit.
What must you do to connect to the CLI of the switching engine?
A. Return to the User view and then issue the command.
B. Enter the OAP view and then issue the command.
C. Use the CTRL+K key combination to access the CLI of the switching engine.
D. Telnet directly to the IPaddress of the switching engine and issue the command.
Answer: A
HP examen HP0-Y35 certification HP0-Y35
NO.5 Click the Exhibit button.
You have recently upgraded the Comware of an HP A-Series Access Controller (AC). Prior to
rebooting the device, you issued the dir command to display the contents of the flash root
directory. Upon reboot, the AC does not successfully run the new version of firmware. What is the issue?
A. The device does not have enough memory to run the new firmware.
B. The filename of the firmware is incorrect.
C. The new firmware is not present in the root directory.
D. Thebootware of the device requires updating as well.
Answer: B
HP HP0-Y35 HP0-Y35 HP0-Y35
NO.6 Click the Exhibit button.
When IRF with Distributed Link Aggregation is implemented at all layers of a LAN (Core,
Aggregation, and Access), which protocols can be replaced by IRF functions? (Select two.)
A. MSTP
B. LACP
C. BFD
D. NSF/GR
E. VRRP
Answer: A,E
HP HP0-Y35 HP0-Y35 examen HP0-Y35
NO.7 Which sampling mechanisms are available in sFlow in A-Series switches and routers? (Select
two.)
A. packet-based
B. packet-length-based
C. time-based
D. ip-protocol-based
E. ip-source-address-based
F. mac-address-based
Answer: A,C
HP HP0-Y35 certification HP0-Y35
NO.8 You have been asked to deploy a guest wireless service within an A-Series solution in the
reception area of a marketing firm. The clients associated with the guest service should be
assigned to VLAN 10. In which view do you assign the VLAN to the wireless service?
A. System view
B. Service Template view
C. VLAN Interface view
D. ESS Interface view
Answer: D
HP examen HP0-Y35 examen HP0-Y35 HP0-Y35 HP0-Y35
NO.9 After a MAD enabled IRF-stack splits, what happens to the part of the stack that entered Recovery
state?
A. All ports, except for the IRF-ports, BFD enabled ports, and console ports are shut down.
B. All ports, except for the IRF-ports, LACP enabled Link aggregation groups, console ports, and
manually excluded ports are shut down.
C. All ports, except for the IRF-ports, console ports, and manually excluded ports, are shut down.
D. All ports except for manually excluded ports are shut down.
Answer: C
HP examen certification HP0-Y35 HP0-Y35 examen
NO.10 Which roles are supported by the sFlow standard?
A. agent and collector only
B. probe and collector only
C. agent, collector, and analyzer
D. probe, collector, and analyzer
Answer: A
HP certification HP0-Y35 HP0-Y35 examen HP0-Y35 HP0-Y35 HP0-Y35 examen
NO.11 Click the Exhibit button.
An IRF-stack is being built using HP A5800 switches, and IRF member 1 will be connected to IRF
member 2 using IRF-port 2. Which IRF-port should it be connected to?
A. 1
B. 2
C. 3
D. any
Answer: A
certification HP HP0-Y35 HP0-Y35 certification HP0-Y35 HP0-Y35
NO.12 What are acceptable topologies for an IRF-Stack? (Select two.)
A. star
B. tree
C. daisy-chain
D. mesh
E. ring
Answer: C,E
certification HP HP0-Y35 examen certification HP0-Y35
NO.13 Using HP A5800 switches, which element must be configured in all switches involved in Layer 2
remote port mirroring?
A. remote-mirroring group
B. mirroring-ingress port
C. monitor-egress port
D. remote-probe VLAN
Answer: D
HP certification HP0-Y35 HP0-Y35 HP0-Y35 certification HP0-Y35
NO.14 You have been asked to deploy an additional HP A-Series wireless access point in the conference room
of an advertising agency. You connect to the CLI of the access controller and create an AP management
template. In which view do you specify the serial number of the access point?
A. Radio view
B. Service Template view
C. AP view
D. ESS Interface view
Answer: C
HP HP0-Y35 HP0-Y35 examen HP0-Y35
NO.15 In an IRF stack, which operational plane is centralized (in the Master) and which is distributed
(among all members)?
A. Management: centralized
Control: centralized
Forwarding: centralized
B. Management: distributed
Control: distributed
Forwarding: distributed
C. Management: centralized
Control: distributed
Forwarding: distributed
D. Management: distributed
Control: centralized
Forwarding: distributed
E. Management: centralized
Control: centralized
Forwarding: distributed
Answer: E
HP examen HP0-Y35 HP0-Y35 HP0-Y35 HP0-Y35 examen
Pass4Test est un site professionnel qui répondre les demandes de beaucoup clients. Les candidats qui ont déjà passer leurs premiers test Certification IT ont devenus les suivis de Pass4Test. Grâce à la bonne qualité des documentations, Pass4Test peut aider tous candidats à réussir le test HP HP0-Y35.
没有评论:
发表评论