Choisir le Pass4Test vous permet non seulement à réussir le test Microsoft 70-410, mais encore à enjouir le service en ligne 24h et la mise à jour gratuite pendant un an. Nous allons lancer au premier temps la Q&A Microsoft 70-410 plus nouvelle. Si vous ne passez pas le test, votre argent sera tout rendu.
Pass4Test, où vous pouvez trouver les conseils et les documentations de test Certification Microsoft 70-410, est un siteweb remarquable offrant les données à préparer le test IT. Les documentations partiels et les mis en nouveau sont offerts gratuitement dans le site de Pass4Test. D'ailleurs, nos experts profitent de leurs expériences et leurs efforts à lancer sans arrêts les Q&A plus proches au test réel. Vous allez passer votre examen plus facile.
La Q&A lancée par Pass4Test est bien poupulaire. Pass4Test peut non seulement vous permettre à appendre les connaissances professionnelles, et aussi les expériences importantes résumées par les spécialistes dans l'Industrie IT. Pass4Test est un bon fournisseur qui peut répondre une grande demande des candidats. Avec l'aide de Pass4Test, vous aurez la confiance pour réussir le test. Vous n'aurez pas aucune raison à refuser le Pass4Test.
Pass4Test peut vous fournir un raccourci à passer le test Microsoft 70-410: moins de temps et efforts dépensés. Vous trouverez les bonnes documentations de se former dans le site Pass4Test qui peut vous aider efficacement à réussir le test Microsoft 70-410. Si vous voyez les documentations dans les autres sites, c'est pas difficile à trouver qu''elles sont venues de Pass4Test, parce que lesquelles dans Pass4Test sont le plus complété et la mise à jour plus vite.
Code d'Examen: 70-410
Nom d'Examen: Microsoft (Installing and Configuring Windows Server 2012)
Questions et réponses: 340 Q&As
70-410 Démo gratuit à télécharger: http://www.pass4test.fr/70-410.html
NO.1 Your network contains an Active Directory domain named adatum.com.The computer
accounts for allmember servers are located in an organizational unit (OU) named Servers.You link a
Group Policy object(GPO) to the Servers OU.You need to ensure that the domain s Backup Operators
group is a member of the local Backup Operators group on each member server.The solution must
not remove any groups from the local Backup Operators groups.What should you do?
A.Add a restricted group named Backup Operators.Add adatum\Backup Operators to the This group
is a
member of list.
B.Add a restricted group named Backup Operators.Add adatum\Backup Operators to the Members
of this
group list.
C.Add a restricted group named adatum\Backup Operators.Add Backup Operators to the This group
is a
member of list.
D.Add a restricted group named adatum\Backup Operators.Add Backup Operators to the Members
of this
group list.
Answer: C
Microsoft examen certification 70-410 certification 70-410 70-410 certification 70-410 70-410
NO.2 Your network contains an Active Directory domain named adatum.com.The domain contains
several
thousand member servers that run Windows Server 2012.All of the computer accounts for the
member
servers are in an organizational unit (OU) named ServersAccounts.Servers are restarted only
occasionally.You need to identify which servers were restarted during the last two days.What should
you
do?
A.Run dsquery serverand specify the oparameter.
B.Run Get-ADComputerand specify the SearchScopeparameter.
C.Run Get-ADComputerand specify the lastLogonproperty.
D.Run dsquery computerand specify the stalepwdparameter.
Answer: C
Microsoft examen 70-410 examen 70-410 examen
NO.3 Your network contains an Active Directory domain named adatum.com.The domain contains
three
domain controllers.The domain controllers are configured as shown in the following table.
DC3 loses network connectivity due to a hardware failure.You plan to remove DC3 from the
domain.You
log on to DC3.You need to identify which service location (SRV) records are registered by DC3.What
should you do?
A.Open the %windir%\system32\dns\backup\adatum.com.dns file.
B.Open the %windir%\system32\config\netlogon.dns file.
C.Run ipconfig /displaydns.
D.Run dcdiag /test:dns.
Answer: B
Microsoft 70-410 certification 70-410 70-410
NO.4 You install Windows Server 2012 on a standalone server named Server1.You configure Server1
as a VPN server.You need to ensure that client computers can establish PPTP connections to
Server1.Which two firewall rules should you create? (Each correct answer presents part of the
solution.Choose two.)
A.an inbound rule for TCP port 1723
B.an inbound rule for protocol 47
C.an inbound rule for TCP port 1701
D.an outbound rule for TCP port 1723
E.an outbound rule for protocol 47
F.an outbound rule for TCP port 1701
Answer: AB
certification Microsoft 70-410 examen 70-410
NO.5 Note: This question is part of a series of questions that use the same or similar answer
choices.An
answer choice may be correct for more than one question in the series.Each question is
independent of
the other questions in this series.Information and details provided in a question apply only to that
question.Your network contains a server named Server1 that runs Windows Server 2012.Server1
has the
Hyper-V server role installed.Server1 hosts four virtual machines named VM1, VM2, VM3, and
VM4.Server1 is configured as shown in the following table.
You install a network monitoring application on VM2.You need to ensure that all of the traffic sent
to VM3
can be captured on VM2.What should you configure?
A.the startup order
B.Processor Compatibility
C.resource metering
D.Resource control
E.Port mirroring
F.Virtual Machine Chimney
G.Integration Services
H.Automatic Start Action
I.the VLAN ID
J.Single-root I/O virtualization
K.NUMA topology
Answer: E
Microsoft 70-410 70-410 certification 70-410 certification 70-410
NO.6 You have a server named Server1 that runs Windows Server 2012.You need to remove
Windows
Explorer, Windows Internet Explorer, and all related components and files from Server1.What
should you
run on Server1?
A.msiexec.exe /uninstall iexplore.exe /x
B.msiexec.exe /uninstall explorer.exe /x
C.Uninstall-WindowsFeature Server-Gui-Shell -Remove
D.Uninstall-WindowsFeature Server-Gui-Mgmt-Infra -Remove
Answer: C
certification Microsoft 70-410 70-410 examen certification 70-410
NO.7 You have a server named Server1 that runs Windows Server 2012.Server1 has the Hyper-V
server role
installed.Server1 is connected to two Fibre Channel SANs and is configured as shown in the
following
table.
You have a virtual machine named VM1.You need to configure VM1 to connect to SAN1.What
should you
do first?
A.Configure network adapter teaming.
B.Create a Virtual Fibre Channel SAN.
C.Create a Hyper-V virtual switch.
D.Add one HBA.
Answer: B
certification Microsoft 70-410 certification 70-410 certification 70-410
NO.8 Your network contains a file server named Server1 that runs Windows Server 2012.All client
computers
run Windows 8.You need to ensure that when users are connected to the network, they always use
local
offline files that are cached from Server1.Which Group Policy setting should you configure?
A.Turn on economical application of administratively assigned Offline Files.
B.Configure slow-link mode.
C.Configure Slow link speed.
D.Enable file synchronization on costed networks.
Answer: B
Microsoft 70-410 examen 70-410 70-410 70-410 examen
NO.9 You have a server that runs Windows Server 2012.The disks on the server are configured as shown
in the
exhibit.(Click the Exhibit button.) You need to create a storage pool that contains Disk 1 and Disk
2.What
should you do first?
A.Convert Disk 1 and Disk 2 to dynamic disks.
B.Delete volume E.
C.Convert Disk 1 and Disk 2 to GPT disks.
D.Create a volume on Disk 2.
Answer: B
Microsoft examen 70-410 70-410 70-410
NO.10 Your network contains an Active Directory domain named contoso.com.You log on to a domain
controller
by using an account named Admin1.Admin1 is a member of the Domain Admins group.You view the
properties of a group named Group1 as shown in the exhibit.(Click the Exhibit button.) Group1 is
located
in an organizational unit (OU) named OU1.You need to ensure that users from Group1 can modify
the
Security settings of OU1 only.What should you do from Active Directory Users and Computers?
A.Modify the Security settings of Group1.
B.Modify the Managed By settings on OU1.
C.Right-click contoso.com and select Delegate Control.
D.Right-click OU1 and select Delegate Control.
Answer: D
Microsoft 70-410 70-410 70-410
Pass4Test est un fournisseur de formation pour une courte terme, et Pass4Test peut vous assurer le succès de test Microsoft 70-410. Si malheureusement, vous échouez le test, votre argent sera tout rendu. Vous pouvez télécharger le démo gratuit avant de choisir Pass4Test. Au moment là, vous serez confiant sur Pass4Test.
没有评论:
发表评论