Vous pouvez trouver un meilleur boulot dans l'industrie IT à travers d'obtenir le test Microsoft 070-664, la voie à la réussite de votre professionnel sera ouverte pour vous.
Pass4Test vous offre un choix meilleur pour faire votre préparation de test Microsoft 070-664 plus éfficace. Si vous voulez réussir le test plus tôt, il ne faut que ajouter la Q&A de Microsoft 070-664 à votre cahier. Pass4Test serait votre guide pendant la préparation et vous permet à réussir le test Microsoft 070-664 sans aucun doute. Vous pouvez obtenir le Certificat comme vous voulez.
Dans l'Industrie IT, le certificat IT peut vous permet d'une space plus grande de se promouvoir. Généralement, la promotion de l'entreprise repose sur ce que vous avec la certification. Le Certificat Microsoft 070-664 est bien autorisé. Avec le certificat Microsoft 070-664, vous aurez une meilleure carrière dans le future. Vous pouvez télécharger tout d'abord la partie gratuite de Q&A Microsoft 070-664.
Dans cette société bien intense, c'est avantage si quelque'un a une technique particulère, donc c'est pourquoi beaucoup de gens ont envie de dépnenser les efforts et le temps à préparer le test Microsoft 070-664, mais ils ne peuvaient pas réussir finalement. C'est juste parce que ils ont pas bien choisi une bonne formation. L'outil de formation lancé par les experts de Pass4Test vous permet à passer le test Microsoft 070-664 coûtant un peu d'argent.
Pass4Test est un site particulier à offrir les guides de formation à propos de test certificat IT. La version plus nouvelle de Q&A Microsoft 070-664 peut répondre sûrement une grande demande des candidats. Comme tout le monde le connait, le certificat Microsoft 070-664 est un point important pendant l'interview dans les grandes entreprises IT. Ça peut expliquer un pourquoi ce test est si populaire. En même temps, Pass4Test est connu par tout le monde. Choisir le Pass4Test, choisir le succès. Votre argent sera tout rendu si malheureusement vous ne passe pas le test Microsoft 070-664.
Code d'Examen: 070-664
Nom d'Examen: Microsoft (TS: Microsoft Lync Server 2010, Configuring)
Questions et réponses: 80 Q&As
070-664 Démo gratuit à télécharger: http://www.pass4test.fr/070-664.html
NO.1 Your network has a Lync Server 2010 infrastructure that contains three servers. The servers are
configured as shown in the following table.
Server2 and Server3 are in a Mediation pool.
You plan to temporarily remove Server2 from the network.
You need to prevent new voice calls from being routed to Server2.
The solution must not disconnect calls in progress.
What should you do?
A. From the Lync Server 2010 Control Panel, modify the status of Server2.
B. From the Lync Server 2010 Control Panel, modify the Voice Routing settings.
C. From the Lync Server 2010 Topology Builder, edit the properties of the PSTN gateway.
D. From the Lync Server 2010 Topology Builder, edit the properties of the Mediation pool.
Answer: A
Microsoft 070-664 070-664 examen 070-664 070-664 070-664
NO.2 Your network has Lync Server 2010 deployed.
You configure Call Admission Control.
You need to enable Call Admission Control.
Which cmdlet should you run?
A. Set-CsBandwidthPolicyServiceConfiguration.
B. Set-CsMediaConfiguration.
C. Set-CsNetworkConfiguration.
D. Set-CsNetworkInterSitePolicy.
Answer: C
certification Microsoft 070-664 070-664 certification 070-664 070-664 examen 070-664 examen
NO.3 Your network has Lync Server 2010 deployed.
You deploy a Mediation Server, and then you configure a voice route that uses a SIP trunk.
You create a test user named User1.
You enable Enterprise Voice for User1.
You need to verify that when User1 initiates calls to external telephone numbers, the calls are routed
through the SIP trunk.
What should you run?
A. From the Lync server, run the Test-CSMCXPushNotification cmdlet.
B. From the Lync server, run the New-CsExUmContact cmdlet.
C. From the Lync server, use the Lync Logging Tool and analyze the trace with Snooper
D. From the Lync server, use the Lync Control Panel to test voice routing in the Voice Routing tab
Answer: D
certification Microsoft certification 070-664 070-664 examen certification 070-664
NO.4 Your network has a Lync Server 2010 infrastructure that uses Enterprise Voice.
You need to enable call park for Enterprise Voice users.
You configure a call park number range.
What should you do next?
A. From the Lync Server 2010 Control Panel, edit the Voice Policy.
B. From the Lync Server 2010 Topology Builder, edit the Site settings.
C. From the Lync Management Shell, run the Set-CsCpsConfiguration cmdlet.
D. From the Lync Management Shell, run the Set-CsVoiceConfiguration cmdlet.
Answer: C
certification Microsoft 070-664 070-664 certification 070-664
NO.5 Your company has a country code of 1 and an area code of 425.
The network has a Lync Server 2010 infrastructure that uses Enterprise Voice.
You plan to create a normalization rule to normalize seven-digit numbers to E.164 format.
You need to identify the appropriate translation rule for the normalization rule.
Which translation rule should you identify?
A. +1$1
B. +1425
C. +1425$1
D. $111425
Answer: C
Microsoft examen 070-664 070-664 examen 070-664
NO.6 Your network has Lync Server 2010 deployed.
You deploy dial-in conferencing.
You need to provide the dial-in conferencing information to all the users on the network.
What should you run?
A. lcscmd /server /action:broadcastmessage
B. ocsumutil /ou:users
C. the New-CsAnnouncement cmdlet
D. the Set-CsPinSendCAWelcomeMail cmdlet
Answer: D
Microsoft 070-664 070-664
NO.7 You deploy a Lync Server 2010 pool and a hardware load balancer.
You plan to provide load balancing for dial-in conferencing.
You need to identify which TCP ports must be redirected on the hardware load balancer.
Which TCP ports should you identify?
A. 80 and 443
B. 5060 and 5061
C. 5072 and 5073
D. 8056 and 8057
Answer: C
certification Microsoft certification 070-664 070-664 070-664 examen certification 070-664
NO.8 Your network has Lync Server 2010 deployed.
You need to ensure that when users on the PSTN receive calls from users in your organization, the calls
display the telephone number +14255551212.
What should you do?
A. From the Lync Server Management Shell, run the Set-CsVoicePolicy cmdlet.
B. From the Lync Server Management Shell, run the Set-CsCpsConfiguration cmdlet.
C. From Lync Server 2010 Control Panel, edit the Route settings.
D. From Lync Server 2010 Control Panel, create a workflow for a Response Group.
Answer: C
Microsoft 070-664 070-664 070-664 070-664 070-664 examen
NO.9 Your network has a Lync Server 2010 infrastructure that has a bandwidth policy.
You need to override the bandwidth policy for a user named User1.
What should you do first.?
A. Create a Dial Plan.
B. Create a Voice Policy.
C. Create a Client Policy.
D. Create a Conferencing Policy.
Answer: B
Microsoft 070-664 examen 070-664
NO.10 Your company has a telephone number range of (425) 555-1200 to (425) 555-1299.
The country code is 1. The network has Lync Server 2010 deployed.
You need to create a normalization rule for four-digit extension dialing that normalizes extensions to E.164
format.
Which two tasks should you perform? (Each correct answer presents part of the solution. Choose two.)
A. Set the translation rule to +1425555$1.
B. Set the translation rule to +142555512$1.
C. Set the translation pattern to match
没有评论:
发表评论