Le test Certificat Motorola Solutions MSC-131 est bien populaire pendant les professionnels IT. Ce Certificat est une bonne preuve de connaissances et techniques professionnelles. C'est une bonne affaire d'acheter une Q&A de qualité coûtant un peu d'argent. Le produit de Pass4Test vise au test Certification Motorola Solutions MSC-131. Vous allez prendre toutes essences du test Motorola Solutions MSC-131 dans une courte terme.
Pass4Test est un seul site web qui peut offrir toutes les documentations de test Motorola Solutions MSC-131. Ce ne sera pas un problème à réussir le test Motorola Solutions MSC-131 si vous préparez le test avec notre guide d'étude.
Avec l'aide du Pass4Test, vous allez passer le test de Certification Motorola Solutions MSC-131 plus facilement. Tout d'abord, vous pouvez choisir un outil de traîner de Motorola Solutions MSC-131, et télécharger les Q&A. Bien que il y en a beaucoup de Q&A pour les tests de Certification IT, les nôtres peuvent vous donner non seulement plus de chances à s'exercer avant le test réel, mais encore vous feront plus confiant à réussir le test. La haute précision des réponses, la grande couverture des documentations, la mise à jour constamment vous assurent à réussir votre test. Vous dépensez moins de temps à préparer le test, mais vous allez obtenir votre certificat plus tôt.
Code d'Examen: MSC-131
Nom d'Examen: Motorola Solutions (Design and Deploy AirDefense Solutions)
Questions et réponses: 103 Q&As
Pour l'instant, vous pouvez télécharger le démo gratuit de Q&A Motorola Solutions MSC-131 dans Pass4Test pour se former avant le test Motorola Solutions MSC-131.
Aujourd'hui, c'est une société pleine de gens talentueux, la meilleure façon de suivre et assurer la place dans votre carrière est de s'améliorer sans arrêt. Si vous n'augmentez pas dans votre carrière, vous êtes juste sous-développé parce que les autres sont meilleurs que vous. Pour éviter ce cas, vous devez vous former successivement.
MSC-131 Démo gratuit à télécharger: http://www.pass4test.fr/MSC-131.html
NO.1 A requirement for seamless roaming in a Robust Security network is that the access points receive the
Pairwise Master Key (PMK) identifier from the station in the reassociation frame. What other information
must be included in that frame?
A. Any 802.1g VLAN tags.
B. The IP address and subnet mask.
C. The randomly generated shared secret.
D. The MAC address of the old access point.
Answer: D
Motorola Solutions MSC-131 MSC-131 examen MSC-131 examen
NO.2 You have configured your ADSP appliance to use a RADIUS server to validate user credentials upon
GUI logon. However, users continue to be validated directly by ADSP. What additional step must be taken
to ensure GUI users are authenticated via the RADIUS server you configured when they are logging into
ADSP?
A. The ADSP appliance must be rebooted to ensure the settings are recorded properly
B. Each user account must be configured to use the correct RADIUS server for authentication
C. You must log into the CLI using the SMXMGR account and run the Enforce Credentials command
D. Log into the GUI with your admin account and click on the Synchronize RADIUS Accounts button in
Appliance Manager
Answer: B
Motorola Solutions certification MSC-131 MSC-131 MSC-131 MSC-131
NO.3 When would the configuration of ADSP include the use of a RADIUS server?
A. When LDAP is not available
B. When sensor validation is required
C. When sensors require a VPN connection
D. When centralized authentication is required
Answer: D
Motorola Solutions MSC-131 MSC-131 examen MSC-131
NO.4 Which of the following best defines a "security risk"?
A. The likelihood of being targeted by a given attack, of an attack being successful, and general exposure
to a given threat.
B. The source and means of a particular type of attack.
C. The security flaws in a system that allow an attack to be successful.
D. Reduced Instruction Set Kernel.
Answer: A
certification Motorola Solutions certification MSC-131 MSC-131 MSC-131 certification MSC-131
NO.5 Broadcasting the SSID and allowing the access point to respond to clients with no SSID makes it easier
for the clients, but some consider it a security loophole. The theory for disallowing these two practices is
that it helps ° h i d ¡± t h e n e t w ork
What is the problem with this theory?
A. Hiding the SSID turns off the beacons thus disabling passive scanning
B. Not responding to null SSIDs causes the EAP process to break down
C. These values must be present in order for intrusion detection systems to function
D. The SSID will still be present in probe request frames and can be seen with a protocol analyzer
Answer: D
certification Motorola Solutions MSC-131 examen MSC-131 examen MSC-131 examen
NO.6 You used the Report Builder to create a custom template to support your PCI compliance initiative.
Two weeks later you decide to use the report but you're not quite sure where to locate it. How would you
access this template?
A. By selecting it in the Custom Reports found in the reporting feature
B. By using the search feature in the Web reporting interface
C. By selecting it under the Inactive category on the Reports page
D. By using the Templates drop down box in the Report Builder application
Answer: A
Motorola Solutions MSC-131 MSC-131
NO.7 What security exists for the communication between sensors and the ADSP appliance?
A. EAP-TTLS and SSL
B. PEAP and SSL
C. PKI and SSL
D. EAP-TLS and SSL
Answer: C
Motorola Solutions MSC-131 MSC-131 MSC-131
NO.8 How can the Wireless Intrusion Protection System (WIPS) feature of the Motorola Solutions
AirDefense Services Platform (ADSP) be used to protect your Wi-Fi network?
A. The WIPS system can remove rogue access points from neighboring networks
B. The WIPS system can utilize RF Jamming to keep your channels clear.
C. The WIPS system can identify wired leakage and other network vulnerabilities
D. The WIPS system can stop neighboring devices from using your channels
Answer: C
Motorola Solutions MSC-131 examen certification MSC-131 certification MSC-131
NO.9 There was a rogue AP on your network as detected by ADSP. The rogue was displayed in your Alarms.
When you run a wireless security posture details report for the same time range, the rogue does not
appear in the report. What is the most likely cause for the rogue not being in the report?
A. The report was run for a different scope than the one that detected the rogue.
B. Your account was not created in the scope level where the rogue was detected.
C. You are logged into ADSP as a guest account which lacks the permission to run the report.
D. The rogue device has been removed from the network and the corresponding alarm is now inactive.
Answer: A
Motorola Solutions MSC-131 certification MSC-131
NO.10 You are the administrator of a very large ADSP installation protecting an international WLAN
deployment. Running a compliance report each day for your boss takes a great deal of your time in the
mornings. What can you do using ADSP to reduce the amount of your time it takes to render this
information and deliver it to your boss?
A. Create a Guest account for your boss. Teach them to run their own each day, leaving you free for other
tasks.
B. Create an Admin account for your boss. Teach them to run their own each day, leaving you free for
other tasks.
C. Add the desired report to the Data Collection Polling interval with a daily schedule to be emailed to your
boss.
D. Add the report to your favorites list. Then schedule it to run at an off peak time and to automatically be
emailed to your boss each day.
Answer: D
Motorola Solutions MSC-131 examen MSC-131 examen certification MSC-131
NO.11 Which of the following appropriately characterizes a rogue access point (AP)?
A. An AP that is causing Co-Channel interference with your APs.
B. An AP that is not the same brand as your customers APs.
C. An AP that is on your wired network without proper authorization.
D. An AP that is not using the security required by corporate policy.
Answer: C
Motorola Solutions MSC-131 MSC-131 MSC-131
NO.12 Your company processes and stores credit card information in a corporate database. You must be able
to determine the status of the company's compliance to the Payment Card Industry (PCI) standard with
regard to wireless device use. How can this be accomplished using ADSP?
A. By running a PCI compliance report at each of the retail store levels of your ADSP tree.
B. By running a PCI compliance report at the accounting department level of your ADSP tree,
C. By running a PCI compliance report at the system level of your ADSP tree.
D. By running a PCI compliance report at network operations center level of your ADSP tree.
Answer: C
Motorola Solutions MSC-131 MSC-131 examen MSC-131 MSC-131 examen MSC-131 examen
NO.13 A new coffee shop opens in your building offering hot-spot internet access. Several of your users are
connecting to the hot-spot while at their desks to bypass your firewall rules. What is the best thing that can
be done using the ADSP system to prevent this?
A. Integrate with the firewall using SNMP and import the same firewall rules.
B. Create a termination policy to prevent accidental associations of authorized AP's.
C. Create a termination policy to prevent authorized stations from using ad-hoc networks.
D. Create a termination policy to prevent accidental associations of your work stations to unauthorized
networks.
Answer: D
Motorola Solutions MSC-131 MSC-131 examen MSC-131 examen
NO.14 What is the purpose of the Bonding command in the ADSP CLI.?
A. The Bonding command is used to link sensors to the correct container in the ADSP tree.
B. The Bonding command is used to enable the Primary and Secondary ADSP appliances to synchronize.
C. The Bonding command is used to enable both of the NIC's on ADSP's system board to act as one for
high availability.
D. The Bonding command is used to ensure that both the Primary and Secondary ADSP appliances are
configured to use the same IP address.
Answer: C
certification Motorola Solutions MSC-131 MSC-131 MSC-131 examen MSC-131 MSC-131 examen
NO.15 Spectrum Analysis can be performed using different modes of operation. Which of following modes
would be the most appropriate to use if you need to perform a Spectrum Analysis and capture information
about the data link layer (Layer 2 of OSI model)?
A. Dual Layer Scan Mode
B. Continuous Scan Mode
C. Background Scan Mode
D. Interference Scan Mode
Answer: C
Motorola Solutions MSC-131 MSC-131 examen MSC-131 MSC-131
Bien qu'il ne soit pas facile à réussir le test Motorola Solutions MSC-131, c'est très improtant à choisir un bon outil de se former. Pass4Test a bien préparé les documentatinos et les exercices pour vous aider à réussir 100% le test. Pass4Test peut non seulement d'être une assurance du succès de votre test Motorola Solutions MSC-131, mais encore à vous aider d'économiser votre temps.
没有评论:
发表评论