Si vous traviallez dur encore pour préparer le test de SAP C_TADM53_70 et réaliser votre but plus vite, Pass4Test peut vous donner une solution plus pratique. Choisir la Q&As de Pass4Test qui vous assure que c'est pas un rêve à réussir le test SAP C_TADM53_70.
Vous pouvez tout d'abord télécharger le démo SAP C_TADM53_70 gratuit dans le site Pass4Test. Une fois que vous décidez à choisir le Pass4Test, Pass4Test va faire tous efforts à vous permettre de réussir le test. Si malheureusement, vous ne passez pas le test, nous allons rendre tout votre argent.
Code d'Examen: C_TADM53_70
Nom d'Examen: SAP (System Administration (MS SQL DB) with SAP NetWeaver 7.0)
Questions et réponses: 80 Q&As
Le guide d'étude sorti de Pass4Test comprend les expériences résumées par nos experts, les matériaux et les Q&As à propos de test Certification SAP C_TADM53_70. Notre bonne réputation dans l'industrie IT sera une assurance 100% à réussir le test SAP C_TADM53_70. Afin de vous permettre de choisir Pass4Test, vous pouvez télécharger gratuitement le démo de Q&A tout d'abord.
Le Certificat de SAP C_TADM53_70 peut vous aider à monter un autre degré de votre carrière, même que votre niveau de vie sera amélioré. Avoir un Certificat SAP C_TADM53_70, c'est-à-dire avoir une grande fortune. Le Certificat SAP C_TADM53_70 peut bien tester des connaissances professionnelles IT. La Q&A SAP C_TADM53_70 plus nouvelle vient de sortir qui peut vous aider à faciilter le cours de test préparation. Notre Q&A comprend les meilleurs exercices, test simulation et les réponses.
Aujourd'hui, c'est une société pleine de gens talentueux, la meilleure façon de suivre et assurer la place dans votre carrière est de s'améliorer sans arrêt. Si vous n'augmentez pas dans votre carrière, vous êtes juste sous-développé parce que les autres sont meilleurs que vous. Pour éviter ce cas, vous devez vous former successivement.
Le Pass4Past possède une équipe d'élite qui peut vous offrir à temps les matériaux de test Certification SAP C_TADM53_70. En même temps, nos experts font l'accent à mettre rapidement à jour les Questions de test Certification IT. L'important est que Pass4Test a une très bonne réputation dans l'industrie IT. Bien que l'on n'ait pas beaucoup de chances à réussir le test de C_TADM53_70, Pass4Test vous assure à passer ce test par une fois grâce à nos documentations avec une bonne précision et une grande couverture.
C_TADM53_70 Démo gratuit à télécharger: http://www.pass4test.fr/C_TADM53_70.html
NO.1 Which of the following statements concerning the Change and Transport System are correct? (Choose
two)
A. The transport directory is given by the parameter DIR_TRANS.
B. Small corrections on ABAP programs can be done safely in the production system.
C. Newly created (and empty) customizing change requests always have one or more tasks.
Answer: A,C
certification SAP certification C_TADM53_70 certification C_TADM53_70 C_TADM53_70
NO.2 How many clients can exist per AS ABAP-based SAP system?
A. The maximum numberis 1000 clients per SAP system
B. As many as you want
C. The number of clients per system is limited to 500
Answer: A
SAP C_TADM53_70 C_TADM53_70 examen certification C_TADM53_70 certification C_TADM53_70 C_TADM53_70
NO.3 Concerning some (CCMS) monitoring terminology, which of the following statements are correct?
(Choose three)
A. Each MTE can only be used in exactly one customer-defined monitor definition at a time.
B. Each monitoring attribute is assigned to exactly one monitoring object.
C. A monitoring attribute is also a monitoring tree element (MTE).
D. A monitoring object can have more than one assigned monitoring attribute.
Answer: B,C,D
certification SAP C_TADM53_70 C_TADM53_70 C_TADM53_70
NO.4 You want to use the Change and Transport System (CTS) to perform transports of non-ABAP objects
into non-ABAP systems. Which configuration settings are necessary for this?
A. The transport domain controller system must be based on SAP NetWeaver AS 7.00 SP Stack 12 or
higher.
B. You must use client-dependent transport routes for all systems in your transport domain.
C. You need to adjust certain tp parameters for the non-ABAP systems in question.
D. The CTS Deploy Web Service must be configured.
Answer: A,C,D
certification SAP C_TADM53_70 C_TADM53_70 certification C_TADM53_70 C_TADM53_70 examen
NO.5 Which of the following is true when creating new clients within an SAP System based on AS ABAP (for
example, SAP ECC).?
A. Customizing and repository objects from a source client are automatically copied to the new client
using the client copy tool.
B. Remote client copies generate large data files at the operating system level.
C. Log files indicating the success of a new client creation are stored in the home directory of the user
initiating the copy.
D. The client transport tool can be used to transfer the same source client, simultaneously, from one SAP
System to multiple other SAP systems in a single action.
E. The client copy can be accelerated by using several dialog work processes in parallel.
Answer: E
SAP certification C_TADM53_70 certification C_TADM53_70 C_TADM53_70
NO.6 The customer has decided to implement a three system landscape for SAP ECC 6.0. A lot of
customizing and development work must be done before the SAP landscape goes live. Someone has
recommended using virtual systems in the beginning, instead of buying physical hardware. Which
statements regarding virtual systems are true? (Choose three)
A. Virtual systems are used to save money in the beginning of a project. Another side-effect is that the
productive SAP system can always be installed on the newest hardware technology.
B. Virtual systems are mainly used to simulate the correctness of transport routes.
C. The <SID> of the virtual system should be the same as the planned physical system.
D. Virtual systems are used in the transport environment like physical systems. Transport buffers,
command files and data files are created.
E. Virtual systems in the SAP transport environment are only used together with hypervisor technologies
from different third-party vendors.
Answer: A,C,D
SAP C_TADM53_70 C_TADM53_70 certification C_TADM53_70 C_TADM53_70
NO.7 After the installation of an SAP ECC 6.0 three-system landscape, you plan to apply a Support Package
stack to the Development system. Which statements concerning support packages for ABAP based SAP
Systems are true? (Choose two)
A. To use the SPAM transaction, you need to configure the transport environment with STMS in the client
000.
B. If there are modification adjustments necessary, transaction SPAM does not start the import. You need
to perform these adjustments before importing the Support Package.
C. To use the SPAM, a valid transport landscape must have been created.
D. To use the SPAM transaction, you need to configure the transport environment with transaction STMS
in the client 066 with user DDIC.
Answer: A,C
SAP C_TADM53_70 examen C_TADM53_70 examen C_TADM53_70 C_TADM53_70 examen
NO.8 Which program, on the operating system level, performs and controls transports between ABAP based
SAP-systems? Note that this program is controlled by your actions, for example in transactions SE09
(Transport Organizer) and STMS (Transport Management System).
A. transport.exe
B. RDDIMPDP.bat
C. import.exe
D. RDDEXPPP.exe
E. tp.exe
Answer: E
certification SAP C_TADM53_70 C_TADM53_70 C_TADM53_70
NO.9 Which features are created automatically once you define a transport domain controller in an
(ABAP-based) SAP landscape? (Choose four)
A. The transport profile for the transport control program tp is generated in the file system.
B. The TMS configuration is stored in the database and the file system.
C. The transport profile for the transport control program tp is generated in the database.
D. The user TMSADM is created.
E. The RFC destinations required for the TMS are generated.
Answer: A,B,D,E
SAP C_TADM53_70 examen C_TADM53_70 C_TADM53_70
NO.10 Which of the following statements regarding the client concept and the client copy tools in ABAP-based
SAP Systems (for example, SAP ECC) are true? (Choose three)
A. Application data can only be copied from one client to another, when all client-specific customizing is
also copied.
B. Clients can be copied between SAP Systems of the same release.
C. Client-independent customizing is always automatically copied between clients.
D. User master records cannot be copied between clients.
E. Clients can be copied within a single SAP System.
Answer: A,B,E
SAP examen certification C_TADM53_70 C_TADM53_70
NO.11 Which of the following options are available as global settings when setting the 'System change option'
in SAP Systems (transaction SE06)? (Choose two)
A. Not modifiable
B. An option to allow changes to Repository and client-independent customizing object
C. Original objects modifiable
D. Repaired objects modifiable
E. Modifiable
Answer: A,E
SAP C_TADM53_70 examen C_TADM53_70 certification C_TADM53_70
NO.12 Which of the following statements regarding the functions offered by CCMS-based monitoring are true?
(Choose two)
A. It is possible to monitor more than one SAP system by using the functions offered by CCMS
monitoring.
B. Correctly configured threshold values to be used for monitoring purposes can be switched by using
operation modes.
C. You need a special key (generated within SAP Solution Manager) to create your own monitor
definitions in transaction RZ20.
Answer: A,B
SAP certification C_TADM53_70 certification C_TADM53_70 C_TADM53_70
NO.13 Which of the following are repository objects in an AS ABAP-based SAP system? (Choose two)
A. Programs
B. Buffer areas
C. Screens (Dynpros)
D. Client-independent customizing settings
Answer: A,C
SAP C_TADM53_70 examen C_TADM53_70 certification C_TADM53_70 C_TADM53_70 examen C_TADM53_70
NO.14 After establishing a three-system landscape transport environment for SAP systems based on AS ABAP,
a developer has released a transport request in the DEV system. You now receive a mail with the
transport request number from the developer and your job is to import this request into the QAS system.
However, even after pressing the refresh button several times, the import queue of the QAS systems
seems to be empty. Which of the following are possible reasons for this problem? (Choose two)
A. The systems DEV and QAS belong to different transport groups.
B. The repository objects in this transport request belong to a package (formerly development class) that
points to a transport layer, which in turn does not point to the QAS system.
C. You do not have the necessary authorizations to refresh the import queue of the QAS system.
D. A virtual system exists in your transport landscape. Once you have a virtual system in your transport
landscape the import buffers are empty.
Answer: A,B
SAP C_TADM53_70 C_TADM53_70
NO.15 Which of the following terms are correlated to the (ABAP-based) SAP system monitoring infrastructure?
(Choose two)
A. Alert Memory
B. Alert Server
C. Data Supplier
D. Monitoring Tree Element
Answer: C,D
SAP C_TADM53_70 C_TADM53_70 C_TADM53_70 examen
Dépenser assez de temps et d'argent pour réussir le test SAP C_TADM53_70 ne peut pas vous assurer à passer le test SAP C_TADM53_70 sans aucune doute. Choisissez le Pass4Test, moins d'argent coûtés mais plus sûr pour le succès de test. Dans cette société, le temps est tellement précieux que vous devez choisir un bon site à vous aider. Choisir le Pass4Test symbole le succès dans le future.
没有评论:
发表评论