Guide de formation plus récente de Motorola Solutions MSC-131 MSC-241

Il y a beaucoup de gans ambitieux dansn l'Industrie IT. Pour monter à une autre hauteur dans la carrière, et être plus proche du pic de l'Industrie IT. On peut choisir le test Motorola Solutions MSC-131 à se preuver. Mais le taux du succès et bien bas. Participer le test Motorola Solutions MSC-131 est un choix intelligent. Dans l'Industrie IT de plus en plus intense, on doit trouver une façon à s'améliorer. Vous pouvez chercher plusieurs façons à vous aider pour réussir le test.

Le guide d'étude de Pas4Test comprend l'outil de se former et même que le test de simulation très proche de test réel. Pass4Test vous permet de se forcer les connaissances professionnelles ciblées à l'examen Certification Motorola Solutions MSC-241. Il n'y a pas de soucis à réussir le test avec une haute note.

Le test Motorola Solutions MSC-131 est bien populaire dans l'Industrie IT. Donc il y a de plus en plus de gens à participer le test Motorola Solutions MSC-131. En fait, c'est pas facile à passer le test si on n'a pas une formation particulière. Pass4Test peut vous aider à économiser le temps et les efforts à réussir le test Certification.

Code d'Examen: MSC-131
Nom d'Examen: Motorola Solutions (Design and Deploy AirDefense Solutions)
Questions et réponses: 103 Q&As

Code d'Examen: MSC-241
Nom d'Examen: Motorola Solutions (Design and Deploy for MOTOTRBO Solutions EMEA)
Questions et réponses: 108 Q&As

Le test Motorola Solutions MSC-241 est très important dans l'Industrie IT, tous les professionnels le connaîssent ce fait. D'ailleur, c'est difficile à réussir ce test, toutefois le test Motorola Solutions MSC-241 est une bonne façon à examiner les connaissances professionnelles. Un gens avec le Certificat Motorola Solutions MSC-241 sera apprécié par beaucoup d'entreprises. Pass4Test est un fournisseur très important parce que beaucoup de candidats qui ont déjà réussi le test preuvent que le produit de Pass4Test est effectif. Vous pouvez réussir 100% le test Motorola Solutions MSC-241 avec l'aide de Pass4Test.

C'est un bon choix si vous prendre l'outil de formation de Pass4Test. Vous pouvez télécharger tout d'abord le démo gratuit pour prendre un essai. Vous aurez plus confiances sur Pass4Test après l'essai de notre démo. Si malheureusement, vous ne passe pas le test, votre argent sera tout rendu.

MSC-131 Démo gratuit à télécharger: http://www.pass4test.fr/MSC-131.html

NO.1 Broadcasting the SSID and allowing the access point to respond to clients with no SSID makes it easier
for the clients, but some consider it a security loophole. The theory for disallowing these two practices is
that it helps ° h i d ¡± t h e n e t w ork
What is the problem with this theory?
A. Hiding the SSID turns off the beacons thus disabling passive scanning
B. Not responding to null SSIDs causes the EAP process to break down
C. These values must be present in order for intrusion detection systems to function
D. The SSID will still be present in probe request frames and can be seen with a protocol analyzer
Answer: D

Motorola Solutions   MSC-131 examen   MSC-131 examen

NO.2 You used the Report Builder to create a custom template to support your PCI compliance initiative.
Two weeks later you decide to use the report but you're not quite sure where to locate it. How would you
access this template?
A. By selecting it in the Custom Reports found in the reporting feature
B. By using the search feature in the Web reporting interface
C. By selecting it under the Inactive category on the Reports page
D. By using the Templates drop down box in the Report Builder application
Answer: A

Motorola Solutions examen   certification MSC-131   MSC-131 examen

NO.3 You are the administrator of a very large ADSP installation protecting an international WLAN
deployment. Running a compliance report each day for your boss takes a great deal of your time in the
mornings. What can you do using ADSP to reduce the amount of your time it takes to render this
information and deliver it to your boss?
A. Create a Guest account for your boss. Teach them to run their own each day, leaving you free for other
tasks.
B. Create an Admin account for your boss. Teach them to run their own each day, leaving you free for
other tasks.
C. Add the desired report to the Data Collection Polling interval with a daily schedule to be emailed to your
boss.
D. Add the report to your favorites list. Then schedule it to run at an off peak time and to automatically be
emailed to your boss each day.
Answer: D

Motorola Solutions examen   MSC-131 examen   certification MSC-131   MSC-131

NO.4 Spectrum Analysis can be performed using different modes of operation. Which of following modes
would be the most appropriate to use if you need to perform a Spectrum Analysis and capture information
about the data link layer (Layer 2 of OSI model)?
A. Dual Layer Scan Mode
B. Continuous Scan Mode
C. Background Scan Mode
D. Interference Scan Mode
Answer: C

Motorola Solutions examen   MSC-131 examen   MSC-131 examen

NO.5 There was a rogue AP on your network as detected by ADSP. The rogue was displayed in your Alarms.
When you run a wireless security posture details report for the same time range, the rogue does not
appear in the report. What is the most likely cause for the rogue not being in the report?
A. The report was run for a different scope than the one that detected the rogue.
B. Your account was not created in the scope level where the rogue was detected.
C. You are logged into ADSP as a guest account which lacks the permission to run the report.
D. The rogue device has been removed from the network and the corresponding alarm is now inactive.
Answer: A

certification Motorola Solutions   certification MSC-131   certification MSC-131

NO.6 You have configured your ADSP appliance to use a RADIUS server to validate user credentials upon
GUI logon. However, users continue to be validated directly by ADSP. What additional step must be taken
to ensure GUI users are authenticated via the RADIUS server you configured when they are logging into
ADSP?
A. The ADSP appliance must be rebooted to ensure the settings are recorded properly
B. Each user account must be configured to use the correct RADIUS server for authentication
C. You must log into the CLI using the SMXMGR account and run the Enforce Credentials command
D. Log into the GUI with your admin account and click on the Synchronize RADIUS Accounts button in
Appliance Manager
Answer: B

Motorola Solutions   MSC-131 examen   MSC-131 examen   certification MSC-131   MSC-131 examen

NO.7 What security exists for the communication between sensors and the ADSP appliance?
A. EAP-TTLS and SSL
B. PEAP and SSL
C. PKI and SSL
D. EAP-TLS and SSL
Answer: C

certification Motorola Solutions   MSC-131   MSC-131 examen   MSC-131 examen   MSC-131

NO.8 When would the configuration of ADSP include the use of a RADIUS server?
A. When LDAP is not available
B. When sensor validation is required
C. When sensors require a VPN connection
D. When centralized authentication is required
Answer: D

Motorola Solutions examen   MSC-131   certification MSC-131   MSC-131

Le dernier examen Motorola Solutions MSC-131 gratuit Télécharger

Les experts de Pass4Test ont fait sortir un nouveau guide d'étude de Certification Motorola Solutions MSC-131, avec ce guide d'étude, réussir ce test a devenu une chose pas difficile. Pass4Test vous permet à réussir 100% le test Motorola Solutions MSC-131 à la première fois. Les questions et réponses vont apparaître dans le test réel. Pass4Test peut vous donner une Q&A plus complète une fois que vous choisissez nous. D'ailleurs, la mise à jour gratuite pendant un an est aussi disponible pour vous.

Selon les feedbacks les professionnels bien réputés dans l'Industrie IT, Pass4Test est un bon catalyseur de leurs succès. L'outil de formation offert par Pass4Test leur aide d'économiser le temps et l'argent, le plus important est qu'ils aient passé le test Motorola Solutions MSC-131 avec succès. Pass4Test est un fournissur fiable. Vous allez réaliser votre rêve avec l'aide de Pass4Test.

Vous pouvez s'exercer en Internet avec le démo gratuit. Vous allez découvrir que la Q&A de Pass4Test est laquelle le plus complète. C'est ce que vous voulez.

Code d'Examen: MSC-131
Nom d'Examen: Motorola Solutions (Design and Deploy AirDefense Solutions)
Questions et réponses: 103 Q&As

Pass4Test vous permet à réussir le test Certification sans beaucoup d'argents et de temps dépensés. La Q&A Motorola Solutions MSC-131 est recherchée par Pass4Test selon les résumés de test réel auparavant, laquelle est bien liée avec le test réel.

Dans cette société bien intense, c'est avantage si quelque'un a une technique particulère, donc c'est pourquoi beaucoup de gens ont envie de dépnenser les efforts et le temps à préparer le test Motorola Solutions MSC-131, mais ils ne peuvaient pas réussir finalement. C'est juste parce que ils ont pas bien choisi une bonne formation. L'outil de formation lancé par les experts de Pass4Test vous permet à passer le test Motorola Solutions MSC-131 coûtant un peu d'argent.

Pass4Test a une équipe se composant des experts qui font la recherche particulièrement des exercices et des Q&As pour le test certification Motorola Solutions MSC-131, d'ailleurs ils peuvent vous proposer à propos de choisir l'outil de se former en ligne. Si vous avez envie d'acheter une Q&A de Pass4Test, Pass4Test vous offrira de matériaux plus détailés et plus nouveaux pour vous aider à approcher au maximum le test réel. Assurez-vous de choisir le Pass4Test, vous réussirez 100% le test Motorola Solutions MSC-131.

MSC-131 Démo gratuit à télécharger: http://www.pass4test.fr/MSC-131.html

NO.1 What is the purpose of the Bonding command in the ADSP CLI.?
A. The Bonding command is used to link sensors to the correct container in the ADSP tree.
B. The Bonding command is used to enable the Primary and Secondary ADSP appliances to synchronize.
C. The Bonding command is used to enable both of the NIC's on ADSP's system board to act as one for
high availability.
D. The Bonding command is used to ensure that both the Primary and Secondary ADSP appliances are
configured to use the same IP address.
Answer: C

certification Motorola Solutions   certification MSC-131   certification MSC-131   MSC-131   MSC-131   MSC-131 examen

NO.2 You are the administrator of a very large ADSP installation protecting an international WLAN
deployment. Running a compliance report each day for your boss takes a great deal of your time in the
mornings. What can you do using ADSP to reduce the amount of your time it takes to render this
information and deliver it to your boss?
A. Create a Guest account for your boss. Teach them to run their own each day, leaving you free for other
tasks.
B. Create an Admin account for your boss. Teach them to run their own each day, leaving you free for
other tasks.
C. Add the desired report to the Data Collection Polling interval with a daily schedule to be emailed to your
boss.
D. Add the report to your favorites list. Then schedule it to run at an off peak time and to automatically be
emailed to your boss each day.
Answer: D

Motorola Solutions   MSC-131 examen   MSC-131 examen   certification MSC-131

NO.3 A requirement for seamless roaming in a Robust Security network is that the access points receive the
Pairwise Master Key (PMK) identifier from the station in the reassociation frame. What other information
must be included in that frame?
A. Any 802.1g VLAN tags.
B. The IP address and subnet mask.
C. The randomly generated shared secret.
D. The MAC address of the old access point.
Answer: D

Motorola Solutions examen   certification MSC-131   MSC-131   certification MSC-131   MSC-131

NO.4 When would the configuration of ADSP include the use of a RADIUS server?
A. When LDAP is not available
B. When sensor validation is required
C. When sensors require a VPN connection
D. When centralized authentication is required
Answer: D

Motorola Solutions   certification MSC-131   MSC-131   MSC-131 examen

NO.5 You have configured your ADSP appliance to use a RADIUS server to validate user credentials upon
GUI logon. However, users continue to be validated directly by ADSP. What additional step must be taken
to ensure GUI users are authenticated via the RADIUS server you configured when they are logging into
ADSP?
A. The ADSP appliance must be rebooted to ensure the settings are recorded properly
B. Each user account must be configured to use the correct RADIUS server for authentication
C. You must log into the CLI using the SMXMGR account and run the Enforce Credentials command
D. Log into the GUI with your admin account and click on the Synchronize RADIUS Accounts button in
Appliance Manager
Answer: B

Motorola Solutions   MSC-131   MSC-131 examen   MSC-131

NO.6 What security exists for the communication between sensors and the ADSP appliance?
A. EAP-TTLS and SSL
B. PEAP and SSL
C. PKI and SSL
D. EAP-TLS and SSL
Answer: C

Motorola Solutions examen   MSC-131   MSC-131   MSC-131

NO.7 Broadcasting the SSID and allowing the access point to respond to clients with no SSID makes it easier
for the clients, but some consider it a security loophole. The theory for disallowing these two practices is
that it helps ° h i d ¡± t h e n e t w ork
What is the problem with this theory?
A. Hiding the SSID turns off the beacons thus disabling passive scanning
B. Not responding to null SSIDs causes the EAP process to break down
C. These values must be present in order for intrusion detection systems to function
D. The SSID will still be present in probe request frames and can be seen with a protocol analyzer
Answer: D

Motorola Solutions   MSC-131   MSC-131 examen   MSC-131

NO.8 Spectrum Analysis can be performed using different modes of operation. Which of following modes
would be the most appropriate to use if you need to perform a Spectrum Analysis and capture information
about the data link layer (Layer 2 of OSI model)?
A. Dual Layer Scan Mode
B. Continuous Scan Mode
C. Background Scan Mode
D. Interference Scan Mode
Answer: C

certification Motorola Solutions   certification MSC-131   certification MSC-131

NO.9 There was a rogue AP on your network as detected by ADSP. The rogue was displayed in your Alarms.
When you run a wireless security posture details report for the same time range, the rogue does not
appear in the report. What is the most likely cause for the rogue not being in the report?
A. The report was run for a different scope than the one that detected the rogue.
B. Your account was not created in the scope level where the rogue was detected.
C. You are logged into ADSP as a guest account which lacks the permission to run the report.
D. The rogue device has been removed from the network and the corresponding alarm is now inactive.
Answer: A

Motorola Solutions examen   MSC-131 examen   MSC-131

NO.10 Your company processes and stores credit card information in a corporate database. You must be able
to determine the status of the company's compliance to the Payment Card Industry (PCI) standard with
regard to wireless device use. How can this be accomplished using ADSP?
A. By running a PCI compliance report at each of the retail store levels of your ADSP tree.
B. By running a PCI compliance report at the accounting department level of your ADSP tree,
C. By running a PCI compliance report at the system level of your ADSP tree.
D. By running a PCI compliance report at network operations center level of your ADSP tree.
Answer: C

certification Motorola Solutions   MSC-131   certification MSC-131

NO.11 A new coffee shop opens in your building offering hot-spot internet access. Several of your users are
connecting to the hot-spot while at their desks to bypass your firewall rules. What is the best thing that can
be done using the ADSP system to prevent this?
A. Integrate with the firewall using SNMP and import the same firewall rules.
B. Create a termination policy to prevent accidental associations of authorized AP's.
C. Create a termination policy to prevent authorized stations from using ad-hoc networks.
D. Create a termination policy to prevent accidental associations of your work stations to unauthorized
networks.
Answer: D

Motorola Solutions   MSC-131   MSC-131   MSC-131   MSC-131

NO.12 You used the Report Builder to create a custom template to support your PCI compliance initiative.
Two weeks later you decide to use the report but you're not quite sure where to locate it. How would you
access this template?
A. By selecting it in the Custom Reports found in the reporting feature
B. By using the search feature in the Web reporting interface
C. By selecting it under the Inactive category on the Reports page
D. By using the Templates drop down box in the Report Builder application
Answer: A

Motorola Solutions examen   MSC-131   certification MSC-131   MSC-131

NO.13 Which of the following appropriately characterizes a rogue access point (AP)?
A. An AP that is causing Co-Channel interference with your APs.
B. An AP that is not the same brand as your customers APs.
C. An AP that is on your wired network without proper authorization.
D. An AP that is not using the security required by corporate policy.
Answer: C

certification Motorola Solutions   MSC-131 examen   MSC-131

NO.14 Which of the following best defines a "security risk"?
A. The likelihood of being targeted by a given attack, of an attack being successful, and general exposure
to a given threat.
B. The source and means of a particular type of attack.
C. The security flaws in a system that allow an attack to be successful.
D. Reduced Instruction Set Kernel.
Answer: A

Motorola Solutions   MSC-131   certification MSC-131   MSC-131 examen   MSC-131

NO.15 How can the Wireless Intrusion Protection System (WIPS) feature of the Motorola Solutions
AirDefense Services Platform (ADSP) be used to protect your Wi-Fi network?
A. The WIPS system can remove rogue access points from neighboring networks
B. The WIPS system can utilize RF Jamming to keep your channels clear.
C. The WIPS system can identify wired leakage and other network vulnerabilities
D. The WIPS system can stop neighboring devices from using your channels
Answer: C

Motorola Solutions   MSC-131   certification MSC-131   MSC-131   MSC-131

Vous pouvez télécharger tout d'abord une partie de Q&A Certification Motorola Solutions MSC-131 pour tester si Pass4Test est vraiment professionnel. Nous pouvons vous aider à réussir 100% le test Motorola Solutions MSC-131. Si malheureusement, vous ratez le test, votre argent sera 100% rendu.

Le dernier examen Motorola Solutions MSC-131 gratuit Télécharger

Les experts de Pass4Test profitent de leurs expériences et connaissances à augmenter successivement la qualité des docmentations pour répondre une grande demande des candidats, juste pour que les candidats soient permis à réussir le test Motorola Solutions MSC-131 par une seule fois. Vous allez avoir les infos plus proches de test réel à travers d'acheter le produti de Pass4Test. Notre confiance sont venue de la grande couverture et la haute précision de nos Q&As. 100% précision des réponses vous donnent une confiance 100%. Vous n'auriez pas aucun soucis avant de participer le test.

Si vous voulez se prouver une compétition et s'enraciner le statut dans l'industrie IT à travers de test Certification Motorola Solutions MSC-131, c'est obligatoire que vous devez avior les connaissances professionnelles. Mais il demande pas mal de travaux à passer le test Certification Motorola Solutions MSC-131. Peut-être d'obtenir le Certificat Motorola Solutions MSC-131 peut promouvoir le tremplin vers l'Industrie IT, mais vous n'avez pas besoin de travailler autant dur à préparer le test. Vous avez un autre choix à faire toutes les choses plus facile : prendre le produit de Pass4Test comme vos matériaux avec qui vous vous pratiquez avant le test réel. La Q&A de Pass4Test est recherchée particulièrement pour le test IT.

Certification Motorola Solutions MSC-131 est un des tests plus importants dans le système de Certification Motorola Solutions. Les experts de Pass4Test profitent leurs expériences et connaissances professionnelles à rechercher les guides d'étude à aider les candidats du test Motorola Solutions MSC-131 à réussir le test. Les Q&As offertes par Pass4Test vous assurent 100% à passer le test. D'ailleurs, la mise à jour pendant un an est gratuite.

Passer le test Motorola Solutions MSC-131, obtenir le Passport peut améliorer la perspective de votre carrière et vous apporter plus de chances à développer votre boulot. Pass4Test est un site très convenable pour les candidats de test Certification Motorola Solutions MSC-131. Ce site peut offrir les informations plus nouvelles et aussi provider les bonnes chances à se former davantage. Ce sont les points essentiels pour votre succès de test Certification Motorola Solutions MSC-131.

La population de la Certification Motorola Solutions MSC-131 est très claire dans l'Industrie IT. Pass4Test se contribue à vous aider à réussir le test, de plus, un an de la mise à jour gratuite pendant est gratuite pour vous. Pass4Test sera le catalyseur de la réalisation de votre rêve. Pour le succès demain, Pass4Test est votre von choix. Vous serez le prochain talent de l'Indutrie IT sous l'aide de Pass4Test.

Code d'Examen: MSC-131
Nom d'Examen: Motorola Solutions (Design and Deploy AirDefense Solutions)
Questions et réponses: 103 Q&As

Pass4Test est un fournisseur important de résume du test Certification IT dans tous les fournissurs. Les experts de Pass4Test travaillent sans arrêt juste pour augmenter la qualité de l'outil formation et vous aider à économiser le temps et l'argent. D'ailleur, le servie en ligne après vendre est toujours disponible pour vous.

MSC-131 Démo gratuit à télécharger: http://www.pass4test.fr/MSC-131.html

NO.1 Broadcasting the SSID and allowing the access point to respond to clients with no SSID makes it easier
for the clients, but some consider it a security loophole. The theory for disallowing these two practices is
that it helps ° h i d ¡± t h e n e t w ork
What is the problem with this theory?
A. Hiding the SSID turns off the beacons thus disabling passive scanning
B. Not responding to null SSIDs causes the EAP process to break down
C. These values must be present in order for intrusion detection systems to function
D. The SSID will still be present in probe request frames and can be seen with a protocol analyzer
Answer: D

certification Motorola Solutions   certification MSC-131   MSC-131   MSC-131 examen

NO.2 You are the administrator of a very large ADSP installation protecting an international WLAN
deployment. Running a compliance report each day for your boss takes a great deal of your time in the
mornings. What can you do using ADSP to reduce the amount of your time it takes to render this
information and deliver it to your boss?
A. Create a Guest account for your boss. Teach them to run their own each day, leaving you free for other
tasks.
B. Create an Admin account for your boss. Teach them to run their own each day, leaving you free for
other tasks.
C. Add the desired report to the Data Collection Polling interval with a daily schedule to be emailed to your
boss.
D. Add the report to your favorites list. Then schedule it to run at an off peak time and to automatically be
emailed to your boss each day.
Answer: D

certification Motorola Solutions   MSC-131   MSC-131   certification MSC-131

NO.3 Spectrum Analysis can be performed using different modes of operation. Which of following modes
would be the most appropriate to use if you need to perform a Spectrum Analysis and capture information
about the data link layer (Layer 2 of OSI model)?
A. Dual Layer Scan Mode
B. Continuous Scan Mode
C. Background Scan Mode
D. Interference Scan Mode
Answer: C

Motorola Solutions   MSC-131   MSC-131   certification MSC-131

NO.4 There was a rogue AP on your network as detected by ADSP. The rogue was displayed in your Alarms.
When you run a wireless security posture details report for the same time range, the rogue does not
appear in the report. What is the most likely cause for the rogue not being in the report?
A. The report was run for a different scope than the one that detected the rogue.
B. Your account was not created in the scope level where the rogue was detected.
C. You are logged into ADSP as a guest account which lacks the permission to run the report.
D. The rogue device has been removed from the network and the corresponding alarm is now inactive.
Answer: A

Motorola Solutions   certification MSC-131   MSC-131 examen

NO.5 How can the Wireless Intrusion Protection System (WIPS) feature of the Motorola Solutions
AirDefense Services Platform (ADSP) be used to protect your Wi-Fi network?
A. The WIPS system can remove rogue access points from neighboring networks
B. The WIPS system can utilize RF Jamming to keep your channels clear.
C. The WIPS system can identify wired leakage and other network vulnerabilities
D. The WIPS system can stop neighboring devices from using your channels
Answer: C

Motorola Solutions examen   MSC-131   MSC-131 examen   certification MSC-131

NO.6 You have configured your ADSP appliance to use a RADIUS server to validate user credentials upon
GUI logon. However, users continue to be validated directly by ADSP. What additional step must be taken
to ensure GUI users are authenticated via the RADIUS server you configured when they are logging into
ADSP?
A. The ADSP appliance must be rebooted to ensure the settings are recorded properly
B. Each user account must be configured to use the correct RADIUS server for authentication
C. You must log into the CLI using the SMXMGR account and run the Enforce Credentials command
D. Log into the GUI with your admin account and click on the Synchronize RADIUS Accounts button in
Appliance Manager
Answer: B

Motorola Solutions   MSC-131 examen   certification MSC-131

NO.7 Your company processes and stores credit card information in a corporate database. You must be able
to determine the status of the company's compliance to the Payment Card Industry (PCI) standard with
regard to wireless device use. How can this be accomplished using ADSP?
A. By running a PCI compliance report at each of the retail store levels of your ADSP tree.
B. By running a PCI compliance report at the accounting department level of your ADSP tree,
C. By running a PCI compliance report at the system level of your ADSP tree.
D. By running a PCI compliance report at network operations center level of your ADSP tree.
Answer: C

Motorola Solutions   MSC-131   MSC-131 examen

NO.8 You used the Report Builder to create a custom template to support your PCI compliance initiative.
Two weeks later you decide to use the report but you're not quite sure where to locate it. How would you
access this template?
A. By selecting it in the Custom Reports found in the reporting feature
B. By using the search feature in the Web reporting interface
C. By selecting it under the Inactive category on the Reports page
D. By using the Templates drop down box in the Report Builder application
Answer: A

certification Motorola Solutions   MSC-131   certification MSC-131   MSC-131

NO.9 What security exists for the communication between sensors and the ADSP appliance?
A. EAP-TTLS and SSL
B. PEAP and SSL
C. PKI and SSL
D. EAP-TLS and SSL
Answer: C

Motorola Solutions   MSC-131   MSC-131   MSC-131

NO.10 Which of the following best defines a "security risk"?
A. The likelihood of being targeted by a given attack, of an attack being successful, and general exposure
to a given threat.
B. The source and means of a particular type of attack.
C. The security flaws in a system that allow an attack to be successful.
D. Reduced Instruction Set Kernel.
Answer: A

Motorola Solutions examen   MSC-131   MSC-131

NO.11 What is the purpose of the Bonding command in the ADSP CLI.?
A. The Bonding command is used to link sensors to the correct container in the ADSP tree.
B. The Bonding command is used to enable the Primary and Secondary ADSP appliances to synchronize.
C. The Bonding command is used to enable both of the NIC's on ADSP's system board to act as one for
high availability.
D. The Bonding command is used to ensure that both the Primary and Secondary ADSP appliances are
configured to use the same IP address.
Answer: C

Motorola Solutions   MSC-131 examen   certification MSC-131   MSC-131   MSC-131

NO.12 A new coffee shop opens in your building offering hot-spot internet access. Several of your users are
connecting to the hot-spot while at their desks to bypass your firewall rules. What is the best thing that can
be done using the ADSP system to prevent this?
A. Integrate with the firewall using SNMP and import the same firewall rules.
B. Create a termination policy to prevent accidental associations of authorized AP's.
C. Create a termination policy to prevent authorized stations from using ad-hoc networks.
D. Create a termination policy to prevent accidental associations of your work stations to unauthorized
networks.
Answer: D

Motorola Solutions examen   certification MSC-131   MSC-131   MSC-131 examen   MSC-131

NO.13 A requirement for seamless roaming in a Robust Security network is that the access points receive the
Pairwise Master Key (PMK) identifier from the station in the reassociation frame. What other information
must be included in that frame?
A. Any 802.1g VLAN tags.
B. The IP address and subnet mask.
C. The randomly generated shared secret.
D. The MAC address of the old access point.
Answer: D

Motorola Solutions examen   MSC-131   MSC-131

NO.14 Which of the following appropriately characterizes a rogue access point (AP)?
A. An AP that is causing Co-Channel interference with your APs.
B. An AP that is not the same brand as your customers APs.
C. An AP that is on your wired network without proper authorization.
D. An AP that is not using the security required by corporate policy.
Answer: C

Motorola Solutions   certification MSC-131   certification MSC-131   MSC-131 examen

NO.15 When would the configuration of ADSP include the use of a RADIUS server?
A. When LDAP is not available
B. When sensor validation is required
C. When sensors require a VPN connection
D. When centralized authentication is required
Answer: D

Motorola Solutions   MSC-131 examen   MSC-131 examen

Le Certificat de Motorola Solutions MSC-131 signifie aussi un nouveau jalon de la carrière, le travail aura une space plus grande à augmenter, et tout le monde dans l'industrie IT sont désireux de l'obtenir. En face d'une grande passion pour le test Certification Motorola Solutions MSC-131, le contrariété est le taux très faible à réussir. Bien sûr que l'on ne passe pas le test MSC-131 sans aucun éffort, en même temps, le test de Motorola Solutions MSC-131 demande les connaissances bien professionnelles. Le guide d'étude dans le site Pass4Test peut vous fournir un raccourci à réussir le test Motorola Solutions MSC-131 et à obtenir le Certificat de ce test. Choisissez le guide d'étude de Pass4Test, vous verrez moins de temps dépensés, moins d'efforts contribués, mais plus de chances à réussir le test. Ça c'est une solution bien rentable pour vous.

MSC-131 dernières questions d'examen certification Motorola Solutions et réponses publiés

Le test Certificat Motorola Solutions MSC-131 est bien populaire pendant les professionnels IT. Ce Certificat est une bonne preuve de connaissances et techniques professionnelles. C'est une bonne affaire d'acheter une Q&A de qualité coûtant un peu d'argent. Le produit de Pass4Test vise au test Certification Motorola Solutions MSC-131. Vous allez prendre toutes essences du test Motorola Solutions MSC-131 dans une courte terme.

Pass4Test est un seul site web qui peut offrir toutes les documentations de test Motorola Solutions MSC-131. Ce ne sera pas un problème à réussir le test Motorola Solutions MSC-131 si vous préparez le test avec notre guide d'étude.

Avec l'aide du Pass4Test, vous allez passer le test de Certification Motorola Solutions MSC-131 plus facilement. Tout d'abord, vous pouvez choisir un outil de traîner de Motorola Solutions MSC-131, et télécharger les Q&A. Bien que il y en a beaucoup de Q&A pour les tests de Certification IT, les nôtres peuvent vous donner non seulement plus de chances à s'exercer avant le test réel, mais encore vous feront plus confiant à réussir le test. La haute précision des réponses, la grande couverture des documentations, la mise à jour constamment vous assurent à réussir votre test. Vous dépensez moins de temps à préparer le test, mais vous allez obtenir votre certificat plus tôt.

Code d'Examen: MSC-131
Nom d'Examen: Motorola Solutions (Design and Deploy AirDefense Solutions)
Questions et réponses: 103 Q&As

Pour l'instant, vous pouvez télécharger le démo gratuit de Q&A Motorola Solutions MSC-131 dans Pass4Test pour se former avant le test Motorola Solutions MSC-131.

Aujourd'hui, c'est une société pleine de gens talentueux, la meilleure façon de suivre et assurer la place dans votre carrière est de s'améliorer sans arrêt. Si vous n'augmentez pas dans votre carrière, vous êtes juste sous-développé parce que les autres sont meilleurs que vous. Pour éviter ce cas, vous devez vous former successivement.

MSC-131 Démo gratuit à télécharger: http://www.pass4test.fr/MSC-131.html

NO.1 A requirement for seamless roaming in a Robust Security network is that the access points receive the
Pairwise Master Key (PMK) identifier from the station in the reassociation frame. What other information
must be included in that frame?
A. Any 802.1g VLAN tags.
B. The IP address and subnet mask.
C. The randomly generated shared secret.
D. The MAC address of the old access point.
Answer: D

Motorola Solutions   MSC-131   MSC-131 examen   MSC-131 examen

NO.2 You have configured your ADSP appliance to use a RADIUS server to validate user credentials upon
GUI logon. However, users continue to be validated directly by ADSP. What additional step must be taken
to ensure GUI users are authenticated via the RADIUS server you configured when they are logging into
ADSP?
A. The ADSP appliance must be rebooted to ensure the settings are recorded properly
B. Each user account must be configured to use the correct RADIUS server for authentication
C. You must log into the CLI using the SMXMGR account and run the Enforce Credentials command
D. Log into the GUI with your admin account and click on the Synchronize RADIUS Accounts button in
Appliance Manager
Answer: B

Motorola Solutions   certification MSC-131   MSC-131   MSC-131   MSC-131

NO.3 When would the configuration of ADSP include the use of a RADIUS server?
A. When LDAP is not available
B. When sensor validation is required
C. When sensors require a VPN connection
D. When centralized authentication is required
Answer: D

Motorola Solutions   MSC-131   MSC-131 examen   MSC-131

NO.4 Which of the following best defines a "security risk"?
A. The likelihood of being targeted by a given attack, of an attack being successful, and general exposure
to a given threat.
B. The source and means of a particular type of attack.
C. The security flaws in a system that allow an attack to be successful.
D. Reduced Instruction Set Kernel.
Answer: A

certification Motorola Solutions   certification MSC-131   MSC-131   MSC-131   certification MSC-131

NO.5 Broadcasting the SSID and allowing the access point to respond to clients with no SSID makes it easier
for the clients, but some consider it a security loophole. The theory for disallowing these two practices is
that it helps ° h i d ¡± t h e n e t w ork
What is the problem with this theory?
A. Hiding the SSID turns off the beacons thus disabling passive scanning
B. Not responding to null SSIDs causes the EAP process to break down
C. These values must be present in order for intrusion detection systems to function
D. The SSID will still be present in probe request frames and can be seen with a protocol analyzer
Answer: D

certification Motorola Solutions   MSC-131 examen   MSC-131 examen   MSC-131 examen

NO.6 You used the Report Builder to create a custom template to support your PCI compliance initiative.
Two weeks later you decide to use the report but you're not quite sure where to locate it. How would you
access this template?
A. By selecting it in the Custom Reports found in the reporting feature
B. By using the search feature in the Web reporting interface
C. By selecting it under the Inactive category on the Reports page
D. By using the Templates drop down box in the Report Builder application
Answer: A

Motorola Solutions   MSC-131   MSC-131

NO.7 What security exists for the communication between sensors and the ADSP appliance?
A. EAP-TTLS and SSL
B. PEAP and SSL
C. PKI and SSL
D. EAP-TLS and SSL
Answer: C

Motorola Solutions   MSC-131   MSC-131   MSC-131

NO.8 How can the Wireless Intrusion Protection System (WIPS) feature of the Motorola Solutions
AirDefense Services Platform (ADSP) be used to protect your Wi-Fi network?
A. The WIPS system can remove rogue access points from neighboring networks
B. The WIPS system can utilize RF Jamming to keep your channels clear.
C. The WIPS system can identify wired leakage and other network vulnerabilities
D. The WIPS system can stop neighboring devices from using your channels
Answer: C

Motorola Solutions   MSC-131 examen   certification MSC-131   certification MSC-131

NO.9 There was a rogue AP on your network as detected by ADSP. The rogue was displayed in your Alarms.
When you run a wireless security posture details report for the same time range, the rogue does not
appear in the report. What is the most likely cause for the rogue not being in the report?
A. The report was run for a different scope than the one that detected the rogue.
B. Your account was not created in the scope level where the rogue was detected.
C. You are logged into ADSP as a guest account which lacks the permission to run the report.
D. The rogue device has been removed from the network and the corresponding alarm is now inactive.
Answer: A

Motorola Solutions   MSC-131   certification MSC-131

NO.10 You are the administrator of a very large ADSP installation protecting an international WLAN
deployment. Running a compliance report each day for your boss takes a great deal of your time in the
mornings. What can you do using ADSP to reduce the amount of your time it takes to render this
information and deliver it to your boss?
A. Create a Guest account for your boss. Teach them to run their own each day, leaving you free for other
tasks.
B. Create an Admin account for your boss. Teach them to run their own each day, leaving you free for
other tasks.
C. Add the desired report to the Data Collection Polling interval with a daily schedule to be emailed to your
boss.
D. Add the report to your favorites list. Then schedule it to run at an off peak time and to automatically be
emailed to your boss each day.
Answer: D

Motorola Solutions   MSC-131 examen   MSC-131 examen   certification MSC-131

NO.11 Which of the following appropriately characterizes a rogue access point (AP)?
A. An AP that is causing Co-Channel interference with your APs.
B. An AP that is not the same brand as your customers APs.
C. An AP that is on your wired network without proper authorization.
D. An AP that is not using the security required by corporate policy.
Answer: C

Motorola Solutions   MSC-131   MSC-131   MSC-131

NO.12 Your company processes and stores credit card information in a corporate database. You must be able
to determine the status of the company's compliance to the Payment Card Industry (PCI) standard with
regard to wireless device use. How can this be accomplished using ADSP?
A. By running a PCI compliance report at each of the retail store levels of your ADSP tree.
B. By running a PCI compliance report at the accounting department level of your ADSP tree,
C. By running a PCI compliance report at the system level of your ADSP tree.
D. By running a PCI compliance report at network operations center level of your ADSP tree.
Answer: C

Motorola Solutions   MSC-131   MSC-131 examen   MSC-131   MSC-131 examen   MSC-131 examen

NO.13 A new coffee shop opens in your building offering hot-spot internet access. Several of your users are
connecting to the hot-spot while at their desks to bypass your firewall rules. What is the best thing that can
be done using the ADSP system to prevent this?
A. Integrate with the firewall using SNMP and import the same firewall rules.
B. Create a termination policy to prevent accidental associations of authorized AP's.
C. Create a termination policy to prevent authorized stations from using ad-hoc networks.
D. Create a termination policy to prevent accidental associations of your work stations to unauthorized
networks.
Answer: D

Motorola Solutions   MSC-131   MSC-131 examen   MSC-131 examen

NO.14 What is the purpose of the Bonding command in the ADSP CLI.?
A. The Bonding command is used to link sensors to the correct container in the ADSP tree.
B. The Bonding command is used to enable the Primary and Secondary ADSP appliances to synchronize.
C. The Bonding command is used to enable both of the NIC's on ADSP's system board to act as one for
high availability.
D. The Bonding command is used to ensure that both the Primary and Secondary ADSP appliances are
configured to use the same IP address.
Answer: C

certification Motorola Solutions   MSC-131   MSC-131   MSC-131 examen   MSC-131   MSC-131 examen

NO.15 Spectrum Analysis can be performed using different modes of operation. Which of following modes
would be the most appropriate to use if you need to perform a Spectrum Analysis and capture information
about the data link layer (Layer 2 of OSI model)?
A. Dual Layer Scan Mode
B. Continuous Scan Mode
C. Background Scan Mode
D. Interference Scan Mode
Answer: C

Motorola Solutions   MSC-131   MSC-131 examen   MSC-131   MSC-131

Bien qu'il ne soit pas facile à réussir le test Motorola Solutions MSC-131, c'est très improtant à choisir un bon outil de se former. Pass4Test a bien préparé les documentatinos et les exercices pour vous aider à réussir 100% le test. Pass4Test peut non seulement d'être une assurance du succès de votre test Motorola Solutions MSC-131, mais encore à vous aider d'économiser votre temps.

Pass4Test offre une formation sur Motorola Solutions MSC-431 MSC-235 MSC-241 MSC-131 MSC-122 matériaux examen

Pass4Test est un seul site web qui peut offrir toutes les documentations de test Motorola Solutions MSC-431 MSC-235 MSC-241 MSC-131 MSC-122. Ce ne sera pas un problème à réussir le test Motorola Solutions MSC-431 MSC-235 MSC-241 MSC-131 MSC-122 si vous préparez le test avec notre guide d'étude.

Le test simulation offert par Pass4Test est bien proche du test réel. Vous pouvez apprendre tous essences d'un test réel à courte terme avec l'aide de Pass4Test. Pass4Test peut vous assurer le succès 100% de test Motorola Solutions MSC-431 MSC-235 MSC-241 MSC-131 MSC-122.

Vous avez aussi la possibilité à réussir le test Motorola Solutions MSC-431 MSC-235 MSC-241 MSC-131 MSC-122. Pass4Test offre la service de la mise à jour gratuite pendant un an. Si vous échouez le test, votre argent sera tout rendu. Maintenant, vous pouvez télécharger la partie gratuite prendre examinser la qualité des produits de Pass4Test.

Le test Motorola Solutions MSC-431 MSC-235 MSC-241 MSC-131 MSC-122 est l'un très improtant dans tous les tests de Certification Motorola Solutions, mais c'est toujours difficile à obtenir ce Certificat. La présence de Pass4Test est pour soulager les candidats. L'équipe de Pass4Test peut vous aider à économiser le temps et l'éffort. Vous pouvez passer le test sans aucune doute sous l'aide de notre Q&A.

Code d'Examen: MSC-431

Nom d'Examen: Motorola Solutions (Lean Six Sigma Black Belt)

Questions et réponses: 100 Q&As

Code d'Examen: MSC-235

Nom d'Examen: Motorola Solutions (Design and Deploy for MOTOTRBO Connect Plus Solutions BETA)

Questions et réponses: 130 Q&As

Code d'Examen: MSC-241

Nom d'Examen: Motorola Solutions (Design and Deploy for MOTOTRBO Solutions EMEA)

Questions et réponses: 108 Q&As

Code d'Examen: MSC-131

Nom d'Examen: Motorola Solutions (Design and Deploy AirDefense Solutions)

Questions et réponses: 103 Q&As

Code d'Examen: MSC-122

Nom d'Examen: Motorola Solutions (Deploy WLAN Solutions)

Questions et réponses: 113 Q&As

Le produit de Pass4Test est réputée par une bonne qualité et fiabilité. Vous pouvez télécharger le démo grantuit pour prendre un essai, nons avons la confiance que vous seriez satisfait. Vous n'aurez plus de raison à s'hésiter en face d'un aussi bon produit. Ajoutez notre Q&A au panier, vous aurez une meilleure préparation avant le test.

MSC-131 Démo gratuit à télécharger: http://www.pass4test.fr/MSC-131.html

NO.1 Which of the following best defines a "security risk"?
A. The likelihood of being targeted by a given attack, of an attack being successful, and general exposure
to a given threat.
B. The source and means of a particular type of attack.
C. The security flaws in a system that allow an attack to be successful.
D. Reduced Instruction Set Kernel.
Answer: A

Motorola Solutions   MSC-131 examen   certification MSC-131

NO.2 You have configured your ADSP appliance to use a RADIUS server to validate user credentials upon
GUI logon. However, users continue to be validated directly by ADSP. What additional step must be taken
to ensure GUI users are authenticated via the RADIUS server you configured when they are logging into
ADSP?
A. The ADSP appliance must be rebooted to ensure the settings are recorded properly
B. Each user account must be configured to use the correct RADIUS server for authentication
C. You must log into the CLI using the SMXMGR account and run the Enforce Credentials command
D. Log into the GUI with your admin account and click on the Synchronize RADIUS Accounts button in
Appliance Manager
Answer: B

certification Motorola Solutions   MSC-131 examen   MSC-131   MSC-131   certification MSC-131   MSC-131

NO.3 Your company processes and stores credit card information in a corporate database. You must be able
to determine the status of the company's compliance to the Payment Card Industry (PCI) standard with
regard to wireless device use. How can this be accomplished using ADSP?
A. By running a PCI compliance report at each of the retail store levels of your ADSP tree.
B. By running a PCI compliance report at the accounting department level of your ADSP tree,
C. By running a PCI compliance report at the system level of your ADSP tree.
D. By running a PCI compliance report at network operations center level of your ADSP tree.
Answer: C

Motorola Solutions   certification MSC-131   MSC-131

NO.4 You are the administrator of a very large ADSP installation protecting an international WLAN
deployment. Running a compliance report each day for your boss takes a great deal of your time in the
mornings. What can you do using ADSP to reduce the amount of your time it takes to render this
information and deliver it to your boss?
A. Create a Guest account for your boss. Teach them to run their own each day, leaving you free for other
tasks.
B. Create an Admin account for your boss. Teach them to run their own each day, leaving you free for
other tasks.
C. Add the desired report to the Data Collection Polling interval with a daily schedule to be emailed to your
boss.
D. Add the report to your favorites list. Then schedule it to run at an off peak time and to automatically be
emailed to your boss each day.
Answer: D

Motorola Solutions examen   MSC-131   MSC-131   MSC-131 examen

NO.5 A requirement for seamless roaming in a Robust Security network is that the access points receive the
Pairwise Master Key (PMK) identifier from the station in the reassociation frame. What other information
must be included in that frame?
A. Any 802.1g VLAN tags.
B. The IP address and subnet mask.
C. The randomly generated shared secret.
D. The MAC address of the old access point.
Answer: D

Motorola Solutions examen   MSC-131   MSC-131 examen   MSC-131   MSC-131

NO.6 What is the purpose of the Bonding command in the ADSP CLI.?
A. The Bonding command is used to link sensors to the correct container in the ADSP tree.
B. The Bonding command is used to enable the Primary and Secondary ADSP appliances to synchronize.
C. The Bonding command is used to enable both of the NIC's on ADSP's system board to act as one for
high availability.
D. The Bonding command is used to ensure that both the Primary and Secondary ADSP appliances are
configured to use the same IP address.
Answer: C

certification Motorola Solutions   MSC-131 examen   MSC-131

NO.7 A new coffee shop opens in your building offering hot-spot internet access. Several of your users are
connecting to the hot-spot while at their desks to bypass your firewall rules. What is the best thing that can
be done using the ADSP system to prevent this?
A. Integrate with the firewall using SNMP and import the same firewall rules.
B. Create a termination policy to prevent accidental associations of authorized AP's.
C. Create a termination policy to prevent authorized stations from using ad-hoc networks.
D. Create a termination policy to prevent accidental associations of your work stations to unauthorized
networks.
Answer: D

Motorola Solutions   MSC-131 examen   MSC-131   certification MSC-131

NO.8 There was a rogue AP on your network as detected by ADSP. The rogue was displayed in your Alarms.
When you run a wireless security posture details report for the same time range, the rogue does not
appear in the report. What is the most likely cause for the rogue not being in the report?
A. The report was run for a different scope than the one that detected the rogue.
B. Your account was not created in the scope level where the rogue was detected.
C. You are logged into ADSP as a guest account which lacks the permission to run the report.
D. The rogue device has been removed from the network and the corresponding alarm is now inactive.
Answer: A

certification Motorola Solutions   MSC-131   certification MSC-131   certification MSC-131   MSC-131

NO.9 What security exists for the communication between sensors and the ADSP appliance?
A. EAP-TTLS and SSL
B. PEAP and SSL
C. PKI and SSL
D. EAP-TLS and SSL
Answer: C

Motorola Solutions   MSC-131   MSC-131 examen   MSC-131

NO.10 Which of the following appropriately characterizes a rogue access point (AP)?
A. An AP that is causing Co-Channel interference with your APs.
B. An AP that is not the same brand as your customers APs.
C. An AP that is on your wired network without proper authorization.
D. An AP that is not using the security required by corporate policy.
Answer: C

Motorola Solutions   MSC-131   MSC-131 examen   MSC-131   certification MSC-131

NO.11 Broadcasting the SSID and allowing the access point to respond to clients with no SSID makes it easier
for the clients, but some consider it a security loophole. The theory for disallowing these two practices is
that it helps ° h i d ¡± t h e n e t w ork
What is the problem with this theory?
A. Hiding the SSID turns off the beacons thus disabling passive scanning
B. Not responding to null SSIDs causes the EAP process to break down
C. These values must be present in order for intrusion detection systems to function
D. The SSID will still be present in probe request frames and can be seen with a protocol analyzer
Answer: D

Motorola Solutions examen   certification MSC-131   MSC-131   certification MSC-131   certification MSC-131

NO.12 Spectrum Analysis can be performed using different modes of operation. Which of following modes
would be the most appropriate to use if you need to perform a Spectrum Analysis and capture information
about the data link layer (Layer 2 of OSI model)?
A. Dual Layer Scan Mode
B. Continuous Scan Mode
C. Background Scan Mode
D. Interference Scan Mode
Answer: C

Motorola Solutions   MSC-131   MSC-131   certification MSC-131   certification MSC-131

NO.13 You used the Report Builder to create a custom template to support your PCI compliance initiative.
Two weeks later you decide to use the report but you're not quite sure where to locate it. How would you
access this template?
A. By selecting it in the Custom Reports found in the reporting feature
B. By using the search feature in the Web reporting interface
C. By selecting it under the Inactive category on the Reports page
D. By using the Templates drop down box in the Report Builder application
Answer: A

Motorola Solutions   MSC-131 examen   MSC-131 examen   MSC-131 examen   MSC-131

NO.14 When would the configuration of ADSP include the use of a RADIUS server?
A. When LDAP is not available
B. When sensor validation is required
C. When sensors require a VPN connection
D. When centralized authentication is required
Answer: D

Motorola Solutions   MSC-131   MSC-131   MSC-131

NO.15 How can the Wireless Intrusion Protection System (WIPS) feature of the Motorola Solutions
AirDefense Services Platform (ADSP) be used to protect your Wi-Fi network?
A. The WIPS system can remove rogue access points from neighboring networks
B. The WIPS system can utilize RF Jamming to keep your channels clear.
C. The WIPS system can identify wired leakage and other network vulnerabilities
D. The WIPS system can stop neighboring devices from using your channels
Answer: C

certification Motorola Solutions   certification MSC-131   MSC-131