显示标签为“EW0-300”的博文。显示所有博文
显示标签为“EW0-300”的博文。显示所有博文

2013年11月11日星期一

Pass4Test offre une formation sur Extreme Networks EW0-300 matériaux examen

Beaucoup de travailleurs espèrent obtenir quelques Certificat IT pour avoir une plus grande space de s'améliorer. Certains certificats peut vous aider à réaliser ce rêve. Le test Extreme Networks EW0-300 est un certificat comme ça. Mais il est difficile à réussir. Il y a plusieurs façons pour se préparer, vous pouvez dépenser plein de temps et d'effort, ou vous pouvez choisir une bonne formation en Internet. Pass4Test est un bon fournisseur de l'outil formation de vous aider à atteindre votre but. Selons vos connaissances à propos de Pass4Test, vous allez faire un bon choix de votre formation.

Vous pouvez s'exercer en Internet avec le démo gratuit. Vous allez découvrir que la Q&A de Pass4Test est laquelle le plus complète. C'est ce que vous voulez.

Code d'Examen: EW0-300
Nom d'Examen: Extreme Networks (Extreme Networks Specialist....)
Questions et réponses: 158 Q&As

C'est sûr que le Certificat Extreme Networks EW0-300 puisse améliorer le lendemain de votre carrière. Parce que si vous pouvez passer le test Extreme Networks EW0-300, c'est une meilleure preuve de vos connaissances professionnelles et de votre bonne capacité à être qualifié d'un bon boulot. Le Certificat Extreme Networks EW0-300 peut bien tester la professionnalité de IT.

Le test Extreme Networks EW0-300 est test certification très répandu dans l'industrie IT. Vous pourriez à améliorer votre niveau de vie, l'état dans l'industrie IT, etc. C'est aussi un test très rentable, mais très difficile à réussir.

EW0-300 Démo gratuit à télécharger: http://www.pass4test.fr/EW0-300.html

NO.1 The following modes of operation are supported with the Network login feature.
(choose all that apply)
A. Secure mode
B. Campus mode
C. Quick Mode
D. ISP mode
Answer: A,B,C,D

Extreme Networks   EW0-300   certification EW0-300   certification EW0-300

NO.2 Exhibit:
According to accompanying diagram and ACL configuration it is possible for Host
A (10.10.10.100) and Host C (30.30.30.100) to successfully communicate.
A. TRUE
B. FALSE
Answer: A

Extreme Networks   EW0-300   EW0-300

NO.3 Extreme ware 7.0 supports both level1 and level 2 IS-IS routers.
A. TRUE
B. FALSE
Answer: A

Extreme Networks examen   EW0-300   EW0-300   EW0-300   certification EW0-300

NO.4 In Extreme Ware, which one of the following is an optional ESRP configuration
that allows you to connect active hosts directly to an ESRP master or standby
switch.
A. ESRP Groups
B. ESRP Domain
C. ESRP Host Attach
D. None of these
Answer: C

certification Extreme Networks   certification EW0-300   certification EW0-300   EW0-300   EW0-300 examen

NO.5 It is possible to set an STP-threshold to switch from a shared tree to a shortest path
tree. This switch over will be initiated by:
A. The Rendezvous Point
B. The Bootstrap Router
C. A last hop router
D. The router nearest to the source
Answer: C

Extreme Networks examen   certification EW0-300   EW0-300 examen

NO.6 How does an IGMP router learns about the existence of hosts in multicast groups:
A. By receiving a response on an IGMP membership query
B. By looking into the ARP cache
C. There is no dynamic learning process, instead static FDB entries are used
D. None of the above
Answer: A

Extreme Networks   EW0-300   certification EW0-300   EW0-300   EW0-300 examen

NO.7 Which CLI command configures DVMRP on all IP multicast interfaces.
A. config dvmrp add vlan all
B. config dvmrp add all
C. enable dvmrp
D. enable dvmrp vlan all
Answer: A

Extreme Networks   EW0-300   certification EW0-300   certification EW0-300

NO.8 In OSPF, the router type that is required to connect an area with another area is
the:
A. Designated Router
B. Back-up Designated Router
C. ASBR
D. ABR
Answer: D

certification Extreme Networks   EW0-300   certification EW0-300   EW0-300   EW0-300

NO.9 How many bits in the IP TOS field does a Summit 48i examine?
A. 4
B. 6
C. 8
D. 16
Answer: B

Extreme Networks   EW0-300   EW0-300 examen   EW0-300

NO.10 Extreme Networks IS? Chipset switches allows you to run simultaneously the
Radius and Tacacs+features.
A. True
B. False
Answer: B

Extreme Networks   EW0-300 examen   certification EW0-300   certification EW0-300

NO.11 On a RADIUS server you can distinguish between switch access and Netlogin
authentication. Extreme provides a vendor specific attribute
Extreme:Extreme-Netlogin-only =disabled/enabled.
User authentication for both Netlogin and switch access is allowed when the value is
disabled.
When the value enabled user authentication is restricted to Netlogin only.
A. True
B. False
Answer: A

Extreme Networks   certification EW0-300   EW0-300   EW0-300 examen

NO.12 Which of the following statements fit the description of PIM sparse mode? (choose
three that apply)
A. PIM sparse mode is suitable for network with minimal multicast deployment.
B. PIM sparse mode builds shared trees based on a common Rendez-Vous Point
C. In PIM sparse mode the RPF check depends on the tree type
D. An explicit join is not required in PIM sparse mode.
Answer: A,B,C,D

Extreme Networks examen   EW0-300 examen   certification EW0-300

NO.13 In PIM sparse mode the Bootstrap Router election is based on the highest IP
address.
A. True
B. False
Answer: B

certification Extreme Networks   certification EW0-300   EW0-300   EW0-300   EW0-300   EW0-300

NO.14 The maximum number of EAPS domains supported per switch and ring is?
A. 64
B. 32
C. 16
D. 8
Answer: A

certification Extreme Networks   EW0-300   EW0-300 examen   EW0-300   EW0-300

NO.15 In SLB, Port Translation Mode is similar to Translation Mode,except that in Port
Translation Mode the physical Port where the node connects to must be configured
as a Fast Ethernet Half Duplex port.
A. True
B. False
Answer: B

Extreme Networks   certification EW0-300   EW0-300   certification EW0-300

NO.16 The integrated IS-IS protocol allows for mixing of IP-only,OSI-only, and dual (IP
and OSI) routers.
A. True
B. False
Answer: A

Extreme Networks examen   EW0-300   EW0-300   certification EW0-300   certification EW0-300

NO.17 An LSP is a link state packet used by which routing protocol?
A. OSPF
B. RIP
C. BGP
D. None of these
Answer: D

Extreme Networks   EW0-300   EW0-300 examen

NO.18 When limit-learning is configured on a port and the limit is reached the following
traffic still flows to the port.
A. Packets destined for the active Mac addresses
B. Broadcast traffic
C. EDP traffic
D. All of the above
Answer: D

Extreme Networks   certification EW0-300   EW0-300

NO.19 Extreme Ware 7.0 can support which OSPF authentication on a per VLAN basis:
A. MD5
B. Simple-password
C. Encrypted simple-password
D. All of these
Answer: D

Extreme Networks   EW0-300   certification EW0-300

NO.20 According
to accompanying diagram and ACL configuration it is possible to telnet
from host A to any of the switch IP addresses.
A. True
B. False
Answer: B

Extreme Networks examen   certification EW0-300   EW0-300   certification EW0-300

NO.21 What is the RP-set?
A. It is the information of which RP are available for what Multicast groups.
It is send by the BSR towards all PIM routers
B. It is the information of which multicast groups are active
It is send by the RP towards all PIM routers
C. It is the information of which BSR are available for what Multicast groups.
It is send by RP towards all PIM routers
D. It is the information, stored by all RP, needed to find the BSR,
Answer: A

certification Extreme Networks   EW0-300 examen   EW0-300   EW0-300   EW0-300 examen

NO.22 On an Extreme Networks switch, how many bits comprise an OSPF area ID?
A. 32 BITS
B. 48 BITS
C. 64 BITS
D. 128 BITS
Answer: A

Extreme Networks   EW0-300   EW0-300 examen   EW0-300 examen

NO.23 The following CLI command is valid to advertise SLB virtual servers in OSPF ith a
cost of 10.
Enable ospf export vip cost 10
A. True
B. False
Answer: A

Extreme Networks   EW0-300   certification EW0-300

NO.24 ESRP-enabled switches can utilize either an IP address or an IPX net ID for their
protected VLANs.
A. TRUE
B. FALSE
Answer: A

certification Extreme Networks   EW0-300   EW0-300

NO.25 What is the CLI command you would use to configure a VLAN to be protected by
ESRP?
A. enable esrp vlan <vlan>
B. enable esrp vlan <vlan> detail
C. config esrp vlan <vlan>
D. config esrp vlan <vlan> detail
Answer: A

Extreme Networks   EW0-300   certification EW0-300   EW0-300

NO.26 OSPF requires that all areas attach directly to the backbone area, and that all
attachments are made with a direct physical connection.
A. True
B. False
Answer: B

Extreme Networks   EW0-300   EW0-300

NO.27 EAPS protection switching is similar to what can be achieved with the Spanning
Tree Protocol but one of the big advantages of EAPS is:
A. EAPS also supports star topologies
B. EAPS has a recovery time of less than a second in case of link failure.
C. An EAPS domain supports multiple root bridges, thus alternative path
D. EAPS eliminates the need for protocols like ESRP or VRRP that bring default
gateway redundancy.
Answer: B

Extreme Networks   certification EW0-300   EW0-300   EW0-300   certification EW0-300   EW0-300

NO.28 The majority of Extreme Networks switches have a dedicated out of band
management port and VLAN. The 10/100BASE-TX Ethernet management port
allows you to communicate directly to the CPU of the switch. If you want the switch
to forward traffic from the mgmt VLAN to other VLANS you just have to enable
ipforwarding on all VLANS including the management VLAN.
A. TRUE
B. FALSE
Answer: B

certification Extreme Networks   EW0-300 examen   certification EW0-300   certification EW0-300   EW0-300

NO.29 An IP-only IS-IS router (or "IP-only" router) is defined to be
A. A router which uses IS-IS as the routing protocol for IP
B. Does not otherwise support OSI protocols
C. One of the IS-IS router types
D. All of the above
Answer: D

Extreme Networks examen   EW0-300   certification EW0-300   EW0-300 examen

NO.30 An Ethernet Automatic Protection Switching (EAPS) domain relies on a control
VLAN.
The ports in that control VLAN ports must be tagged, and participating in the ring
only.
A. True
B. False
Answer: A

Extreme Networks examen   EW0-300   EW0-300 examen   EW0-300   EW0-300

La solution offerte par Pass4Test comprenant un test simulation bien proche de test réel Extreme Networks EW0-300 peut vous assurer à réussir 100% le test Extreme Networks EW0-300. D'ailleur, le service de la mise à jour gratuite est aussi pour vous. Maintenant, vous pouvez télécharger le démo gratuit pour prendre un essai.

2013年8月15日星期四

Dernières Extreme Networks EW0-100 EW0-200 EW0-300 de la pratique de l'examen questions et réponses téléchargement gratuit

Il demande les connaissances professionnelles pour passer le test Extreme Networks EW0-100 EW0-200 EW0-300. Si vous manquez encore ces connaissances, vous avez besoin de Pass4Test comme une resourece de ces connaissances essentielles pour le test. Pass4Test et ses experts peuvent vous aider à renfocer ces connaissances et vous offrir les Q&As. Pass4Test fais tous efforts à vous aider à se renforcer les connaissances professionnelles et à passer le test. Choisir le Pass4Test peut non seulement à obtenir le Certificat Extreme Networks EW0-100 EW0-200 EW0-300, et aussi vous offrir le service de la mise à jour gratuite pendant un an. Si malheureusement, vous ratez le test, votre argent sera 100% rendu.


Il faut une bonne préparation et aussi une série de connaissances professionnelles complètes pour réussir le test Extreme Networks EW0-100 EW0-200 EW0-300. La ressourece providée par Pass4Test peut juste s'accorder votre demande.


Le test Extreme Networks EW0-100 EW0-200 EW0-300 est populaire dans l'Industrie IT. Il y a beaucoup de professionnels IT veulent ce passport de IT. Votre vie et salaire sera améliorée avec ce Certificat. Vous aurez une meilleure assurance.


Vous pouvez télécharger le démo gratuit pour prendre un essai. Vous aurez plus confiance sur Pass4Test. N'hésitez plus à choisir la Q&A Extreme Networks EW0-100 EW0-200 EW0-300 comme votre guide d'étude.


Code d'Examen: EW0-100

Nom d'Examen: Extreme Networks (Extreme Networks Associate (ENA) )

Questions et réponses: 241 Q&As

Code d'Examen: EW0-200

Nom d'Examen: Extreme Networks (Extreme networks associate(ena))

Questions et réponses: 240 Q&As

Code d'Examen: EW0-300

Nom d'Examen: Extreme Networks (Extreme Networks Specialist....)

Questions et réponses: 158 Q&As

EW0-100 Démo gratuit à télécharger: http://www.pass4test.fr/EW0-100.html


NO.1 If a packet to be forwarded does not match existing flow information in the ASIC
route cache, the packet is queued to the __________ for route processing.
Answer: cpu

Extreme Networks   EW0-100   EW0-100

NO.2 Given router interfaces 10.0.0.1/24, 10.10.10.10/24, 192.168.0.1/24, and
192.168.255.254/24 on a Summit7i switch what will be the OSPF router ID given the
following command: config ospf routerid automatic?
A. 10.0.0.1/24
B. 10.10.10.10/24
C. 192.168.0.1/24
D. 192.168.255.254/24
Answer: D

certification Extreme Networks   EW0-100 examen   EW0-100

NO.3 RIP version 2 uses a composite metric that includes link speed and delay.
A. True
B. False
Answer: B

Extreme Networks   EW0-100   certification EW0-100   EW0-100   certification EW0-100

NO.4 Extreme Networks "I" series switches have this many queues per port. __________.
Answer: 8

NO.5 When using Spanning Tree Protocol, ExtremeWare permits VLANs in different
STPDs to share the same port when tagged.
A. True
B. False
Answer: B

Extreme Networks   certification EW0-100   certification EW0-100

NO.6 Name a relative route priority that cannot be altered? __________.
Answer: direct

Extreme Networks examen   EW0-100   EW0-100   EW0-100   EW0-100

NO.7 Which of the following is not advertised in an OSPF Link State Advertisement?
A. Costs
B. Link utilization
C. Router interfaces
D. Neighbor information
Answer: B

Extreme Networks   EW0-100   certification EW0-100   certification EW0-100   EW0-100

NO.8 STPDs s0, s1, and s2 have been created. How would you activate only s1 while
leaving the other STPDs inactive?
A. enable stpd s1
B. enable s1 stpd
C. enable stp ¨¤ enable s1 stpd
D. None of these
Answer: A

Extreme Networks   EW0-100 examen   EW0-100   EW0-100   EW0-100

NO.9 All OSPF routers in the same area must have the same LSDB.
A. True
B. False
Answer: A

certification Extreme Networks   EW0-100 examen   EW0-100

NO.10 Which of the following routes will be used to forward a frame to 192.168.1.174?
A. 192.168.1.0/29
B. 192.168.1.128/30
C. 192.168.1.128/25
D. None of these.
Answer: C

certification Extreme Networks   EW0-100   EW0-100   certification EW0-100

NO.11 Internal routers within an OSPF area are either DRs, BDRs, or __________.
Answer: ODR

Extreme Networks   EW0-100 examen   certification EW0-100

NO.12 __________ allow(s) multiple VLANs to be controlled by a single ESRP instance.
A. ESRP domains
B. ESRP groups
C. ESRP host-attach
D. None of these.
Answer: A

Extreme Networks   EW0-100   certification EW0-100   EW0-100

NO.13 VLAN aggregation allows multiple sub-VLANs to share a single IP subnet.
A. True
B. False
Answer: A

Extreme Networks   certification EW0-100   EW0-100   EW0-100   EW0-100

NO.14 Exhibit:
Given this display, how would you find information similar to the SHOW SWITCH
command?
A. Click on STATISTICS, then SHOW, then SWITCH.
B. Click on STATISTICS, then SWITCH, then SHOW.
C. Click on STATISTICS, then SHOW.
D. Click on STATISTICS, then SWITCH.
Answer: D

Extreme Networks   EW0-100   certification EW0-100   EW0-100   EW0-100 examen

NO.15 In RIP, poison reverse means that:
A. A route is not advertised to the interface from which it was learned.
B. A route is advertised as unreachable to the interface from which it was learned.
C. Traffic whose source interface does not match the routing table is blackholed.
D. None of these.
Answer: B

certification Extreme Networks   certification EW0-100   EW0-100

NO.16 How do you disable Split Horizon?
A. disable rip splithorizon noadvertise
B. unconfig rip splithorizon
C. disable rip splithorizon
D. unconfig rip splithorizon noadvertise
Answer: C

Extreme Networks examen   EW0-100 examen   EW0-100   EW0-100   certification EW0-100   certification EW0-100

NO.17 QoS policy is applied _____ in an Extreme switch.
A. per port
B. per queue, per port
C. per queue
D. None of these.
Answer: B

Extreme Networks   EW0-100   EW0-100   EW0-100

NO.18 What type of area is used to limit external routes?
A. Stub area
B. Normal area
C. Backbone area
D. None of these
Answer: A

Extreme Networks   EW0-100   EW0-100

NO.19 Which ExtremeWare feature permits ESRP to increase the number of protected
VLANs by placing them under the control of a master VLAN?
A. ESRP groups
B. ESRP domains
C. ESRP host attach
D. None of these.
Answer: B

Extreme Networks examen   EW0-100 examen   EW0-100   EW0-100   certification EW0-100

NO.20 Which command would you use to configure VLAN corporate with IP address
192.168.0.1/16?
A. config vlan corporate ipaddress 192.168.0.1/16
B. config ipaddress corporate vlan 192.168.0.1/16
C. config ipaddress 192.168.0.1/16 vlan corporate
D. config ipaddress 192.168.0.1/16 corporate vlan
Answer: A

Extreme Networks   EW0-100   EW0-100   EW0-100   EW0-100 examen

NO.21 Unlike VRRP, the Extreme Standby Router Protocol provides redundancy at both
the data link and network layers.
A. True
B. False
Answer: A

certification Extreme Networks   certification EW0-100   EW0-100 examen

NO.22 A VLAN can be a member of up to 64 STPDs.
A. True
B. False
Answer: B

Extreme Networks   certification EW0-100   EW0-100   EW0-100 examen   EW0-100

NO.23 What is the minimum ExtremeWare software version that supports the Summit48i?
A. ExtremeWare 4.x
B. ExtremeWare 5.x
C. ExtremeWare 6.x
D. None of the above
Answer: C

Extreme Networks   EW0-100   EW0-100   EW0-100

NO.24 Without QoS, all packets are allowed equal access to an egress port.
A. True
B. False
Answer: A

Extreme Networks examen   EW0-100   certification EW0-100

NO.25 How would you change the password for John Doe's management account?
A. Enter config jdoe and then enter the new password twice.
B. Enter config jdoe user account and then enter the new password twice.
C. Enter config user account jdoe and then enter the new password twice.
D. Enter config account jdoe and then enter the new password twice.
Answer: D

Extreme Networks   EW0-100   certification EW0-100   EW0-100

NO.26 Which RIP settings are enabled by default?
A. Triggered updates
B. Poison Reverse
C. Split Horizon
D. Route redistribution
Answer: ABC

Extreme Networks   certification EW0-100   certification EW0-100

NO.27 Which command would you use to configure VLAN CORPORATE (tag 100) with
ports 1:1 through 4:8 tagged and ports 5:1 through 8:8 as untagged?
A. config vlan corporate ports add 1:1-4:8 tagged ¨¤ config vlan corporate ports add
5:1-8:8 untagged
B. config vlan corporate add ports1:1-4:8 tagged ¨¤ config vlan corporate add ports
5:1-8:8 untagged
C. config corporate vlan add ports 1:1-4-8 tagged ¨¤ config corporate vlan add ports
5:1-8:8 untagged
D. config corporate vlan ports add 1:1-4:8 tagged ¨¤ config corporate vlan ports add
5:1:8:8 untagged
Answer: B

Extreme Networks   EW0-100   EW0-100 examen   EW0-100   EW0-100

NO.28 What is the default STP forward delay value?
A. 2 seconds
B. 10 seconds
C. 15 seconds
D. 20 seconds
Answer: C

Extreme Networks examen   EW0-100   EW0-100 examen   certification EW0-100   EW0-100

NO.29 What is the default value for the RIP garbagetime setting?
A. 30 seconds
B. 60 seconds
C. 120 seconds
D. 180 seconds
Answer: C

Extreme Networks examen   certification EW0-100   certification EW0-100   EW0-100   certification EW0-100

NO.30 SNMP access to ExtremeWare can be limited by the following methods:
A. Use an access list
B. Use an access profile
C. Use the disable snmp access command
D. None of these
Answer: ABC

certification Extreme Networks   certification EW0-100   EW0-100   EW0-100   EW0-100

2013年7月18日星期四

Certification Extreme Networks de téléchargement gratuit pratique d'examen EW0-300, questions et réponses

Si vous traviallez dur encore pour préparer le test de Extreme Networks EW0-300 et réaliser votre but plus vite, Pass4Test peut vous donner une solution plus pratique. Choisir la Q&As de Pass4Test qui vous assure que c'est pas un rêve à réussir le test Extreme Networks EW0-300.


Si vous voulez se prouver une compétition et s'enraciner le statut dans l'industrie IT à travers de test Certification Extreme Networks EW0-300, c'est obligatoire que vous devez avior les connaissances professionnelles. Mais il demande pas mal de travaux à passer le test Certification Extreme Networks EW0-300. Peut-être d'obtenir le Certificat Extreme Networks EW0-300 peut promouvoir le tremplin vers l'Industrie IT, mais vous n'avez pas besoin de travailler autant dur à préparer le test. Vous avez un autre choix à faire toutes les choses plus facile : prendre le produit de Pass4Test comme vos matériaux avec qui vous vous pratiquez avant le test réel. La Q&A de Pass4Test est recherchée particulièrement pour le test IT.


Certification Extreme Networks EW0-300 est un des tests plus importants dans le système de Certification Extreme Networks. Les experts de Pass4Test profitent leurs expériences et connaissances professionnelles à rechercher les guides d'étude à aider les candidats du test Extreme Networks EW0-300 à réussir le test. Les Q&As offertes par Pass4Test vous assurent 100% à passer le test. D'ailleurs, la mise à jour pendant un an est gratuite.


Dans l'Industrie IT, le certificat IT peut vous permet d'une space plus grande de se promouvoir. Généralement, la promotion de l'entreprise repose sur ce que vous avec la certification. Le Certificat Extreme Networks EW0-300 est bien autorisé. Avec le certificat Extreme Networks EW0-300, vous aurez une meilleure carrière dans le future. Vous pouvez télécharger tout d'abord la partie gratuite de Q&A Extreme Networks EW0-300.


Aujourd'hui, c'est une société pleine de gens talentueux, la meilleure façon de suivre et assurer la place dans votre carrière est de s'améliorer sans arrêt. Si vous n'augmentez pas dans votre carrière, vous êtes juste sous-développé parce que les autres sont meilleurs que vous. Pour éviter ce cas, vous devez vous former successivement.


Code d'Examen: EW0-300

Nom d'Examen: Extreme Networks (Extreme Networks Specialist....)

Questions et réponses: 158 Q&As

Pass4Test est un site d'offrir l'outil de formation convenable pour les candidats de test Certification IT. Le produit de Pass4Test peut aider les candidats à économiser les temps et les efforts. L'outil de formation est bien proche que test réel. Vous allez réussir le test 100% avec l'aide de test simulation de Pass4Test. C'est une bonne affaire à prendre le Certificat IT en coûtant un peu d'argent. N'hésitez plus d'ajouter l'outil de formation au panier.


Le suucès n'est pas loin de vous une fois que vous choisissez le produit de Q&A Extreme Networks EW0-300 de Pass4Test.


EW0-300 Démo gratuit à télécharger: http://www.pass4test.fr/EW0-300.html


NO.1 In PIM sparse mode the Bootstrap Router election is based on the highest IP
address.
A. True
B. False
Answer: B

Extreme Networks   EW0-300   EW0-300

NO.2 The majority of Extreme Networks switches have a dedicated out of band
management port and VLAN. The 10/100BASE-TX Ethernet management port
allows you to communicate directly to the CPU of the switch. If you want the switch
to forward traffic from the mgmt VLAN to other VLANS you just have to enable
ipforwarding on all VLANS including the management VLAN.
A. TRUE
B. FALSE
Answer: B

Extreme Networks   EW0-300 examen   certification EW0-300   certification EW0-300

NO.3 An LSP is a link state packet used by which routing protocol?
A. OSPF
B. RIP
C. BGP
D. None of these
Answer: D

certification Extreme Networks   certification EW0-300   certification EW0-300   EW0-300

NO.4 How does an IGMP router learns about the existence of hosts in multicast groups:
A. By receiving a response on an IGMP membership query
B. By looking into the ARP cache
C. There is no dynamic learning process, instead static FDB entries are used
D. None of the above
Answer: A

Extreme Networks   EW0-300   certification EW0-300   certification EW0-300

NO.5 The integrated IS-IS protocol allows for mixing of IP-only,OSI-only, and dual (IP
and OSI) routers.
A. True
B. False
Answer: A

certification Extreme Networks   EW0-300   EW0-300 examen   EW0-300

NO.6 An IP-only IS-IS router (or "IP-only" router) is defined to be
A. A router which uses IS-IS as the routing protocol for IP
B. Does not otherwise support OSI protocols
C. One of the IS-IS router types
D. All of the above
Answer: D

certification Extreme Networks   EW0-300 examen   EW0-300   EW0-300 examen   EW0-300

NO.7 What is the RP-set?
A. It is the information of which RP are available for what Multicast groups.
It is send by the BSR towards all PIM routers
B. It is the information of which multicast groups are active
It is send by the RP towards all PIM routers
C. It is the information of which BSR are available for what Multicast groups.
It is send by RP towards all PIM routers
D. It is the information, stored by all RP, needed to find the BSR,
Answer: A

Extreme Networks   EW0-300   EW0-300

NO.8 Extreme Networks IS? Chipset switches allows you to run simultaneously the
Radius and Tacacs+features.
A. True
B. False
Answer: B

certification Extreme Networks   certification EW0-300   certification EW0-300   certification EW0-300   EW0-300 examen

NO.9 Which of the following statements fit the description of PIM sparse mode? (choose
three that apply)
A. PIM sparse mode is suitable for network with minimal multicast deployment.
B. PIM sparse mode builds shared trees based on a common Rendez-Vous Point
C. In PIM sparse mode the RPF check depends on the tree type
D. An explicit join is not required in PIM sparse mode.
Answer: A,B,C,D

Extreme Networks   EW0-300   EW0-300   certification EW0-300

NO.10 Exhibit:
According to accompanying diagram and ACL configuration it is possible for Host
A (10.10.10.100) and Host C (30.30.30.100) to successfully communicate.
A. TRUE
B. FALSE
Answer: A

Extreme Networks   EW0-300   EW0-300   EW0-300 examen   EW0-300 examen

NO.11 How many bits in the IP TOS field does a Summit 48i examine?
A. 4
B. 6
C. 8
D. 16
Answer: B

Extreme Networks examen   EW0-300 examen   EW0-300 examen

NO.12 Extreme Ware 7.0 can support which OSPF authentication on a per VLAN basis:
A. MD5
B. Simple-password
C. Encrypted simple-password
D. All of these
Answer: D

Extreme Networks   certification EW0-300   EW0-300   EW0-300   EW0-300   EW0-300

NO.13 The following modes of operation are supported with the Network login feature.
(choose all that apply)
A. Secure mode
B. Campus mode
C. Quick Mode
D. ISP mode
Answer: A,B,C,D

Extreme Networks   certification EW0-300   EW0-300   EW0-300   EW0-300 examen

NO.14 An Ethernet Automatic Protection Switching (EAPS) domain relies on a control
VLAN.
The ports in that control VLAN ports must be tagged, and participating in the ring
only.
A. True
B. False
Answer: A

Extreme Networks examen   certification EW0-300   EW0-300 examen

NO.15 Which CLI command configures DVMRP on all IP multicast interfaces.
A. config dvmrp add vlan all
B. config dvmrp add all
C. enable dvmrp
D. enable dvmrp vlan all
Answer: A

Extreme Networks examen   EW0-300   certification EW0-300   EW0-300 examen

NO.16 ESRP-enabled switches can utilize either an IP address or an IPX net ID for their
protected VLANs.
A. TRUE
B. FALSE
Answer: A

certification Extreme Networks   certification EW0-300   certification EW0-300   EW0-300   EW0-300

NO.17 What is the CLI command you would use to configure a VLAN to be protected by
ESRP?
A. enable esrp vlan <vlan>
B. enable esrp vlan <vlan> detail
C. config esrp vlan <vlan>
D. config esrp vlan <vlan> detail
Answer: A

certification Extreme Networks   EW0-300   EW0-300   EW0-300 examen   EW0-300

NO.18 EAPS protection switching is similar to what can be achieved with the Spanning
Tree Protocol but one of the big advantages of EAPS is:
A. EAPS also supports star topologies
B. EAPS has a recovery time of less than a second in case of link failure.
C. An EAPS domain supports multiple root bridges, thus alternative path
D. EAPS eliminates the need for protocols like ESRP or VRRP that bring default
gateway redundancy.
Answer: B

Extreme Networks examen   certification EW0-300   EW0-300   EW0-300   EW0-300 examen

NO.19 In SLB, Port Translation Mode is similar to Translation Mode,except that in Port
Translation Mode the physical Port where the node connects to must be configured
as a Fast Ethernet Half Duplex port.
A. True
B. False
Answer: B

Extreme Networks examen   EW0-300 examen   certification EW0-300   EW0-300   EW0-300

NO.20 On a RADIUS server you can distinguish between switch access and Netlogin
authentication. Extreme provides a vendor specific attribute
Extreme:Extreme-Netlogin-only =disabled/enabled.
User authentication for both Netlogin and switch access is allowed when the value is
disabled.
When the value enabled user authentication is restricted to Netlogin only.
A. True
B. False
Answer: A

Extreme Networks   EW0-300 examen   EW0-300   EW0-300

NO.21 When limit-learning is configured on a port and the limit is reached the following
traffic still flows to the port.
A. Packets destined for the active Mac addresses
B. Broadcast traffic
C. EDP traffic
D. All of the above
Answer: D

Extreme Networks examen   certification EW0-300   EW0-300   certification EW0-300

NO.22 In OSPF, the router type that is required to connect an area with another area is
the:
A. Designated Router
B. Back-up Designated Router
C. ASBR
D. ABR
Answer: D

Extreme Networks   EW0-300   certification EW0-300   EW0-300   certification EW0-300

NO.23 The following CLI command is valid to advertise SLB virtual servers in OSPF ith a
cost of 10.
Enable ospf export vip cost 10
A. True
B. False
Answer: A

certification Extreme Networks   EW0-300 examen   certification EW0-300   EW0-300 examen

NO.24 According
to accompanying diagram and ACL configuration it is possible to telnet
from host A to any of the switch IP addresses.
A. True
B. False
Answer: B

certification Extreme Networks   EW0-300   EW0-300 examen   EW0-300 examen   EW0-300   EW0-300 examen

NO.25 The maximum number of EAPS domains supported per switch and ring is?
A. 64
B. 32
C. 16
D. 8
Answer: A

certification Extreme Networks   EW0-300   certification EW0-300   EW0-300   EW0-300

NO.26 OSPF requires that all areas attach directly to the backbone area, and that all
attachments are made with a direct physical connection.
A. True
B. False
Answer: B

Extreme Networks examen   EW0-300 examen   certification EW0-300   EW0-300 examen

NO.27 It is possible to set an STP-threshold to switch from a shared tree to a shortest path
tree. This switch over will be initiated by:
A. The Rendezvous Point
B. The Bootstrap Router
C. A last hop router
D. The router nearest to the source
Answer: C

Extreme Networks   EW0-300   certification EW0-300   EW0-300

NO.28 In Extreme Ware, which one of the following is an optional ESRP configuration
that allows you to connect active hosts directly to an ESRP master or standby
switch.
A. ESRP Groups
B. ESRP Domain
C. ESRP Host Attach
D. None of these
Answer: C

certification Extreme Networks   EW0-300   certification EW0-300   certification EW0-300

NO.29 Extreme ware 7.0 supports both level1 and level 2 IS-IS routers.
A. TRUE
B. FALSE
Answer: A

certification Extreme Networks   EW0-300   certification EW0-300

NO.30 On an Extreme Networks switch, how many bits comprise an OSPF area ID?
A. 32 BITS
B. 48 BITS
C. 64 BITS
D. 128 BITS
Answer: A

Extreme Networks   EW0-300 examen   certification EW0-300   EW0-300 examen

Si vous travaillez quand même très dur et dépensez beaucoup de temps pour préparer le test Extreme Networks EW0-300, mais ne se savez pas du tout c'est où le raccourci pour passer le test certification, Pass4Test peut vous donner une solution efficace. Vous vous sentirez magiquement jouer un effet multiplicateur.