La partie plus nouvelle de test Certification Microsoft 070-521-VB est disponible à télécharger gratuitement dans le site de Pass4Test. Les exercices de Pass4Test sont bien proches de test réel Microsoft 070-521-VB. En comparaison les Q&As dans les autres sites, vous trouverez que les nôtres sont beaucoup plus complets. Les Q&As de Pass4Test sont tout recherchés par les experts de Pass4Test, y compris le test simulation.
Beaucoup de gens trouvent difficile à passer le test Microsoft 070-521-VB, c'est juste parce que ils n'ont pas bien choisi une bonne Q&A. Vous penserez que le test Microsoft 070-521-VB n'est pas du tout autant dur que l'imaginer. Le produit de Pass4Test non seulement comprend les Q&As qui sont impressionnées par sa grande couverture des Questions, mais aussi le service en ligne et le service après vendre.
Les experts de Pass4Test ont fait sortir un nouveau guide d'étude de Certification Microsoft 070-521-VB, avec ce guide d'étude, réussir ce test a devenu une chose pas difficile. Pass4Test vous permet à réussir 100% le test Microsoft 070-521-VB à la première fois. Les questions et réponses vont apparaître dans le test réel. Pass4Test peut vous donner une Q&A plus complète une fois que vous choisissez nous. D'ailleurs, la mise à jour gratuite pendant un an est aussi disponible pour vous.
Le test simulation offert par Pass4Test est bien proche du test réel. Vous pouvez apprendre tous essences d'un test réel à courte terme avec l'aide de Pass4Test. Pass4Test peut vous assurer le succès 100% de test Microsoft 070-521-VB.
Code d'Examen: 070-521-VB
Nom d'Examen: Microsoft (UPG:Trans MCPD.NET Frmwk 3.5 Dev Skil to .NET 4 Wndws App De)
Questions et réponses: 115 Q&As
Vous pouvez télécharger tout d'abord une partie de Q&A Certification Microsoft 070-521-VB pour tester si Pass4Test est vraiment professionnel. Nous pouvons vous aider à réussir 100% le test Microsoft 070-521-VB. Si malheureusement, vous ratez le test, votre argent sera 100% rendu.
070-521-VB Démo gratuit à télécharger: http://www.pass4test.fr/070-521-VB.html
NO.1 Your Windows Communication Foundation (WCF) client application uses HTTP to communicate with
the service. You need to enable message logging and include all security information such as tokens and
nonces in logged messages.
What should you do?
A. In the application configuration file, add the logKnownPii attribute to the message logging diagnostics
source and set the value of the attribute to true.
Generate the ContosoService class using the Add Service Reference wizard.
Add a reference to System.ServiceModel.Routing.dll.
Add the following code segment.
Dim client As ContosoService = New ContosoService()
Dim behavior As SoapProcessingBehavior = New SoapProcessingBehavior()
behavior.ProcessMessages = True
client.Endpoint.Behaviors.Add(behavior)
B. In the application configuration file, add the following XML segment to the system.serviceModel
configuration section group.
<diagnostics>
<messageLogging logMessagesAtTransportLevel="true"
logEntireMessage="true" />
</diagnostics>
C. In the machine configuration file, add the following XML segment to the system.serviceModel
configuration section.
<machineSettings enableLoggingKnownPii="true" />
Generate the ContosoService class using the Add Service Reference wizard.
Add the following code segment.
Dim client As ContosoService = New ContosoService()
client.Endpoint.Behaviors.Add(New CallbackDebugBehavior(True))
D. In the machine configuration file, add the following XML segment to the system.serviceModel
configuration section.
<machineSettings enableLoggingKnownPii="true" />
In the application configuration file, add the logKnownPii attribute to the message logging diagnostics
source and set the value of the attribute to true.
In the application configuration file, add the following XML segment to the system.serviceModel
configuration section group.
<diagnostics>
<messageLogging logMessagesAtTransportLevel="true"/>
</diagnostics>
Answer: D
Microsoft examen 070-521-VB examen 070-521-VB
NO.2 A Windows Communication Foundation (WCF) service has a callback contract. You are developing a
client application that will call this service.
You must ensure that the client application can interact with the WCF service.
What should you do?
A. On the OperationContractAttribute, set the AsyncPattern property value to True.
B. On the OperationContractAttribute, set the ReplyAction property value to the endpoint address of the
client.
C. On the client, create a proxy derived from DuplexClientBase(Of TChannel).
D. On the client, use GetCallbackChannel(Of T).
Answer: C
Microsoft examen 070-521-VB 070-521-VB certification 070-521-VB certification 070-521-VB certification 070-521-VB
NO.3 A Windows Communication Foundation (WCF) service has the following contract.
<ServiceContract(Namespace:="http://contoso.com")>
Public Interface IShipping
<OperationContract()>
Function DoWork(ByVal id As Integer) As String
End Interface
This is one of several service contracts hosted by your application. All endpoints use SOAP 1.2 bindings
with WS-Addressing 1.0. The System.ServiceModel.MessageLogging trace source in the
system.diagnostics configuration section is configured with one listener.
You need to make sure that only the messages that are returned from the DoWork operation are logged.
Which XML segment should you add to the system.serviceModel/diagnostics/messageLogging/filters
configuration element?
A. <add xmlns:addr="http://www.w3.org/2005/08/addressing">
//addr:Action[text() =
'http://contoso.com/IShipping/DoWorkResponse']
</add>
B. <add xmlns:soap="http://www.w3.org/2003/05/soap-envelope">
//soap:Action[text() =
'http://contoso.com/IShipping/DoWorkResponse']
</add>
C. <add xmlns:addr="http://www.w3.org/2005/08/addressing">
//addr:Action[text() =
'http://contoso.com/IShipping/DoWork']
</add>
D. <add xmlns:soap="http://www.w3.org/2003/05/soap-envelope">
//soap:Action[text() =
'http://contoso.com/IShipping/DoWork']
</add>
Answer: A
Microsoft 070-521-VB examen certification 070-521-VB certification 070-521-VB certification 070-521-VB
NO.4 </behaviors>
You need to configure the service to publish the service metadata.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)
A. Add the following XML segment between lines 10 and 11.
<endpoint address=""
binding="mexHttpBinding"
contract="IMetadataExchange"
/>
B. Add the following XML segment between lines 10 and 11.
<endpoint address=""
binding="basicHttpBinding"
contract="IMetadataExchange"
/>
C. Add the following XML segment between lines15 and 16.
<serviceDiscovery>
<announcementEndpoints>
<endpoint address=""/>
</announcementEndpoints>
</serviceDiscovery>
D. Add the following XML segment between lines 15 and 16
<serviceMetadata httpGetEnabled="true"/>
Answer: AD
Microsoft 070-521-VB 070-521-VB certification 070-521-VB
17. Four Windows Communication Foundation (WCF) services are hosted in Microsoft Internet
Information Services (IIS). No behavior configuration exists in the web.config file.
You need to configure the application so that every service and endpoint limits the number of concurrent
calls to 50 and the number of concurrent sessions to 25.
Which XML segment should you add to the system.serviceModel configuration section of the web.config
file?
A. <behaviors>
<serviceBehaviors>
<behavior name="*">
<serviceThrottling maxConcurrentCalls="50" maxConcurrentSessions="25"/>
</behavior>
</serviceBehaviors>
</behaviors>
B. <behaviors>
<serviceBehaviors>
<behavior name="default">
<serviceThrottling maxConcurrentCalls="50" maxConcurrentSessions="25"/>
</behavior>
</serviceBehaviors>
</behaviors>
C. <behaviors>
<serviceBehaviors>
<behavior name="">
<serviceThrottling maxConcurrentCalls="50" maxConcurrentSessions="25"/>
</behavior>
</serviceBehaviors>
</behaviors>
D. <behaviors>
<serviceBehaviors>
<behavior name="ALL">
<serviceThrottling maxConcurrentCalls="50" maxConcurrentSessions="25"/>
</behavior>
</serviceBehaviors>
</behaviors>
Answer: C
Microsoft examen 070-521-VB certification 070-521-VB 070-521-VB 070-521-VB 070-521-VB
18. The endpoint of a Windows Communication Foundation (WCF) service uses basicHttpBinding for its
binding. Your company's policies have changed to require that messages not be sent in clear text.
You must ensure that all messages are encrypted when traveling across the network.
What should you do?
A. Set the ProtectionLevel property on the service contract and update the binding attribute in the
endpoint element of the configuration file to wsHttpBinding.
B. Set the ProtectionLevel property on the service contract and update the bindingConfiguration attribute
in the endpoint element of the configuration file to webHttpBinding.
C. Set the PrincipalPermissionAttribute on the service contract and update the binding attribute in the
endpoint element of the configuration file to wsHttpBinding.
D. Set the PrincipalPermissionAttribute on the service contract and update the bindingConfiguration
attribute in the endpoint element of the configuration file to wsHttpBinding.
Answer: A
certification Microsoft certification 070-521-VB 070-521-VB 070-521-VB examen 070-521-VB
NO.5 A Windows Communication Foundation (WCF) client uses the following service contract. (Line
numbers are included for reference only.)
01 <ServiceContract()>
02 Public Interface IService
03
04 <OperationContract()>
05 Function Operation1() As String
06 <OperationContract()>
07 Function Operation2() As String
08
09 End Interface
You need to ensure that all calls to Operation1 and Operation2 from the client are encrypted and signed.
What should you do?
A. Set the ProtectionLevel property in line 01 to EncryptAndSign.
B. Set the ProtectionLevel property in line 04 and line 06 to Sign.
C. Add a SecurityCriticalAttribute for each operation.
D. Add a SecuritySafeCriticalAttribute for each operation.
Answer: A
Microsoft examen 070-521-VB 070-521-VB examen
NO.6 You are creating a Windows Communication Foundation (WCF) service based on WSHttpBinding.
New audit requirements dictate that callers must be authenticated on every call to ensure that their
credentials have not been revoked.
You need to ensure that the service will not cache the security request token.
What should you do?
A. Apply a ServiceBehavior attribute to the service implementation class with the InstanceContextMode
property set to Single.
B. In the message security configuration, change clientCredentialType from IssuedToken to UserName.
C. In the message security configuration, set establishSecurityContext to false.
D. At the end of every operation, call the SessionStateUtility.RaiseSessionEnd method.
Answer: C
certification Microsoft 070-521-VB 070-521-VB examen 070-521-VB
NO.7 A WCF service code is implemented as follows. (Line numbers are included for reference only.)
01 <ServiceContract()>
02 <ServiceBehavior(
03 InstanceContextMode:=InstanceContextMode.Single)>
04 Public Class CalculatorService
05
06 <OperationContract()>
07 Public Function Calculate(ByVal op1 As Double,
08 ByVal op As String, ByVal op2 As Double) As Double
24 End Function
25
26 End Class
You need to decrease the response time of the service.
What are two possible ways to achieve this goal? (Each correct answer presents a complete solution.
Choose two.)
A. Change the service behavior to the following.
<ServiceBehavior(
InstanceContextMode:=InstanceContextMode.Single,
ConcurrencyMode:=ConcurrencyMode.Multiple)>
B. Change the service behavior to the following.
<ServiceBehavior(InstanceContextMode:=InstanceContextMode.PerCall)>
C. Require the clients use threads, the Parallel Task Library, or other mechanism to issue service calls in
parallel.
D. Require the clients to use async operations when calling the service.
Answer: AB
Microsoft examen certification 070-521-VB certification 070-521-VB
NO.8 A Windows Communication Foundation (WCF) application uses a data contract that has several data
members.
You need the application to throw a SerializationException if any of the data members are not present
when a serialized instance of the data contract is deserialized.
What should you do?
A. Add the KnownType attribute to the data contract. Set a default value in each of the data member
declarations.
B. Add the KnownType attribute to the data contract. Set the Order property of each data member to
unique integer value.
C. Set the EmitDefaultValue property of each data member to False.
D. Set the IsRequired property of each data member to True.
Answer: D
Microsoft examen 070-521-VB 070-521-VB examen
NO.9 A Windows Communication Foundation (WCF) service is responsible for transmitting XML documents
between systems. The service has the following requirements:
It must minimize the transmission size by attaching the XML document as is without using escape
characters or base64 encoding.
It must interoperate with systems that use SOAP but are not built on the .NET platform.
You need to configure the service to support these requirements.
Which message encoding should you use?
A. Binary message encoding
B. MTOM (Message Transmission Optimization Mechanism) message encoding
C. Text message encoding with message version set to none
D. Text message encoding with message version set to SOAP 1.2
Answer: B
Microsoft examen 070-521-VB examen 070-521-VB 070-521-VB examen 070-521-VB
NO.10 You are building a client for a Windows Communication Foundation (WCF) service.
You need to create a proxy to consume this service.
Which class should you use?
A. ChannelFactory(Of TChannel)
B. ServiceHost
C. ClientRuntime
D. CommunicationObject
Answer: A
certification Microsoft 070-521-VB 070-521-VB 070-521-VB 070-521-VB examen
NO.11 You are consuming a Windows Communication Foundation (WCF) service in an ASP.NET Web
application. The service interface is defined as follows.
<ServiceContract()>
Public Interface ICatalog
<OperationContract()>
<WebGet(UriTemplate:="/Catalog/Items/{id}",
ResponseFormat:=WebMessageFormat.Json)>
Function RetrieveItemDescription(ByVal id As Integer) As String
End Interface
The service is hosted at /Catalog.svc.
You need to call the service using jQuery to retrieve the description of an item as indicated by a variable
named itemId.
Which code segment should you use?
A. $.get(String.format("/Catalog.svc/Catalog/Items/?id={0}", itemId)
null,
function (data) {
},
"javascript");
B. $.get(String.format("/Catalog.svc/Catalog/Items/{0}", itemId),
null,
function (data) {
},
"json");
C. $.get(String.format("/Catalog.svc/Catalog/Items/{0}", itemId),
null,
function (data) {
},
"xml");
D. $.get(String.format("/Catalog.svc/Catalog/Items/id={0}", itemId),
null,
function (data) {
},
"json");
Answer: B
Microsoft examen 070-521-VB 070-521-VB certification 070-521-VB certification 070-521-VB
NO.12 You are creating a Windows Communication Foundation (WCF) service that implements operations in
a RESTful manner. You need to add a delete operation.
You implement the delete method as follows.
Sub DeleteItems(ByVal id As String)
You need to configure WCF to call this method when the client calls the service with the HTTP DELETE
operation.
What should you do?
A. Add the WebInvoke(UriTemplate:="/Items/{id}", Method:="DELETE") attribute to the operation.
B. Add the HttpDelete attribute to the operation.
C. Replace the string parameter with a RemovedActivityAction parameter.
D. Change the Sub statement to Function and specify RemovedActivityAction as the return type.
Answer: A
Microsoft 070-521-VB 070-521-VB examen 070-521-VB examen 070-521-VB
NO.13 You are developing a Windows Communication Foundation (WCF) service that reads messages from
a public non-transactional MSMQ queue. You need to configure the service to read messages from the
failed-delivery queue. Which URI should you specify in the endpoint configuration settings of the service?
A. net.msmq://localhost/msmq$;FailedMessages
B. net.msmq://localhost/msmq$;DeadLetter
C. net.msmq://localhost/system$;DeadXact
D. net.msmq://localhost/system$;DeadLetter
Answer: D
Microsoft examen 070-521-VB certification 070-521-VB 070-521-VB 070-521-VB certification 070-521-VB
NO.14 You are creating a Windows Communication Foundation (WCF) service that is implemented as follows.
(Line numbers are included for reference only.)
01 <ServiceContract()>
02 <ServiceBehavior(IncludeExceptionDetailInFaults:=True)>
03 Public Class OrderService
04
05 <OperationContract()>
06 Public Sub SubmitOrder(ByVal anOrder As Order)
07
08 Try
09
10 Catch ex As DivideByZeroException
11
12 End Try
13 End Sub
14
15 End Class
You need to ensure that the stack trace details of the exception are not included in the error information
sent to the client.
What should you do?
A. Replace line 11 with the following line.
Throw
B. Replace line 11 with the following line.
Throw New FaultException(Of Order)(anOrder, ex.ToString())
C. After line 05, add the following line.
<FaultContract(GetType(FaultException(Of Order)))>
Replace line 11 with the following line.
Throw ex
D. After line 05, add the following line.
<FaultContract(GetType(FaultException(Of Order)))>
Replace line 11 with the following line.
Throw New FaultException(Of Order)(
anOrder, "Divide by zero exception")
Answer: D
Microsoft 070-521-VB 070-521-VB certification 070-521-VB 070-521-VB examen
NO.15 You are adding a Windows Communication Foundation (WCF) service to an existing application. The
application is configured as follows. (Line numbers are included for reference only.)
01 <configuration>
02 <system.serviceModel>
03 <services>
04 <service name="Contoso.Sales.StockService"
05 behaviorConfiguration="MetadataBehavior">
06 <host>
07 <baseAddresses>
08 <add
baseAddress="http://contoso.com:8080/StockService" />
09 </baseAddresses>
10 </host>
11 </service>
12 </services>
13 <behaviors>
14 <serviceBehaviors>
15 <behavior name="MetadataBehavior">
16 </behavior>
NO.16 You are moving a Windows Communication Foundation (WCF) service into production.
You need to be able to monitor the health of the service. You only want to enable all performance counter
instances exposed by the ServiceModelService 4.0.0.0 counter group.
Which element should you add to the system.serviceModel section in the application configuration file?
A. <diagnostics performanceCounters="ServiceOnly" />
B. <diagnostics wmiProviderEnabled="true" performanceCounters="Off" />
C. <diagnostics performanceCounters="All" />
D. <diagnostics wmiProviderEnabled="true" />
Answer: A
Microsoft 070-521-VB examen 070-521-VB 070-521-VB certification 070-521-VB 070-521-VB
NO.17 You are creating a Windows Communication Foundation (WCF) service to process orders. The data
contract for the order is defined as follows.
<DataContract()>
Public Class Order
<DataMember()>
Public Property CardHolderName As String
<DataMember()>
Public Property CreditCardNumber As String
End Class
You have the following requirements:
Enable the transmission of the contents of Order from the clients to the service.
Ensure that the contents of CreditCardNumber are not sent across the network in clear text.
Ensure that the contents of CreditCardNumber are accessible by the service to process the order.
You need to implement the service to meet these requirements.
What should you do?
A. Add a DataProtectionPermission attribute to the CreditCardNumber property and set the ProtectData
property to True.
B. Convert the DataContract to a MessageContract and set the ProtectionLevel property to
EncryptAndSign.
C. Change the data type of CreditCardNumber from String to SecureString.
D. Implement the CreditCardNumber property getter and setter. In the setter, run the value of the
CreditCardNumber through the MD5CryptoServiceProvider class TransformBlock method.
Answer: B
Microsoft certification 070-521-VB 070-521-VB
NO.18 </serviceBehaviors>
NO.19 You are creating a Windows Communication Foundation (WCF) service. You do not want to expose the
internal implementation at the service layer. You need to expose the following class as a service named
Arithmetic with an operation named Sum.
Public Class Calculator
Public Function Add(ByVal x As Integer,
ByVal y As Integer) As Integer
End Function
End Class
Which code segment should you use?
A. <ServiceContract(Namespace:="Arithmetic")>
Public Class Calculator
<OperationContract(Action:="Sum")>
Public Function Add(ByVal x As Integer,
ByVal y As Integer) As Integer
End Function
End Class
B. <ServiceContract(ConfigurationName:="Arithmetic")>
Public Class Calculator
<OperationContract(Action:="Sum")>
Public Function Add(ByVal x As Integer,
ByVal y As Integer) As Integer
End Function
End Class
C. <ServiceContract(Name:="Arithmetic")>
Public Class Calculator
<OperationContract(Name:="Sum")>
Public Function Add(ByVal x As Integer,
ByVal y As Integer) As Integer
End Function
End Class
D. <ServiceContract(Name:="Arithmetic")>
Public Class Calculator
<OperationContract(ReplyAction:="Sum")>
Public Function Add(ByVal x As Integer,
ByVal y As Integer) As Integer
End Function
End Class
Answer: C
certification Microsoft certification 070-521-VB certification 070-521-VB 070-521-VB
NO.20 You are developing an application to update a user s social status. You need to consume the service
using Windows Communication Foundation (WCF).
The client configuration is as follows.
<system.serviceModel>
<bindings>
<webHttpBinding>
<binding name="SocialConfig">
<security mode="TransportCredentialOnly">
<transport clientCredentialType="Basic"
?realm="Social API" />
</security>
</binding>
</webHttpBinding>
</bindings>
<client>
<endpoint address="http://contoso.com"
binding="webHttpBinding"
bindingConfiguration="SocialConfig"
contract="ISocialStatus"
name="SocialClient" />
</client>
</system.serviceModel>
The service contract is defined as follows.
<ServiceContract()>
Public Interface ISocialStatus
<OperationContract()>
<WebInvoke(UriTemplate:="/statuses/update.xml?status={text}")>
Sub UpdateStatus(ByVal text As String)
End Interface
Which code segment should you use to update the social status?
A. Using factory As WebChannelFactory(Of ISocialStatus) =
New WebChannelFactory(Of ISocialStatus)("SocialClient")
factory.Credentials.UserName.UserName = user.Name
factory.Credentials.UserName.Password = user.Password
Dim socialChannel As ISocialStatus = factory.CreateChannel()
socialChannel.UpdateStatus(newStatus)
End Using
B. Using factory As ChannelFactory(Of ISocialStatus) =
New WebChannelFactory(Of ISocialStatus)(GetType(ISocialStatus))
factory.Credentials.UserName.UserName = user.Name
factory.Credentials.UserName.Password = user.Password
Dim socialChannel As ISocialStatus = factory.CreateChannel()
socialChannel.UpdateStatus(newStatus)
End Using
C. Using factory As ChannelFactory(Of ISocialStatus) =
New ChannelFactory(Of ISocialStatus)("POST")
factory.Credentials.Windows.ClientCredential.UserName =
user.Name
factory.Credentials.Windows.ClientCredential.SecurePassword.SetAt(
0, user.Password)
Dim socialChannel As ISocialStatus = factory.CreateChannel()
socialChannel.UpdateStatus(newStatus)
End Using
D. Using factory As WebChannelFactory(Of ISocialStatus) =
New WebChannelFactory(Of ISocialStatus)(GetType(ISocialClient))
factory.Credentials.Windows.ClientCredential.UserName =
user.Name
factory.Credentials.Windows.ClientCredential.SecurePassword.SetAt(
0, user.Password)
Dim socialChannel As ISocialStatus = factory.CreateChannel()
socialChannel.UpdateStatus(newStatus)
End Using
Answer: A
Microsoft 070-521-VB certification 070-521-VB certification 070-521-VB certification 070-521-VB
Le temps est tellement précieux dans cette société que une bonn façon de se former avant le test Microsoft 070-521-VB est très important. Pass4Test fait tous efforts à assurer tous les candidats à réussir le test. Aussi, un an de mise à jour est gratuite pour vous. Si vous ne passez pas le test, votre argent sera tout rendu.
没有评论:
发表评论