CompTIA meilleur examen PD1-001, questions et réponses

Le Certificat de CompTIA PD1-001 peut vous aider à monter un autre degré de votre carrière, même que votre niveau de vie sera amélioré. Avoir un Certificat CompTIA PD1-001, c'est-à-dire avoir une grande fortune. Le Certificat CompTIA PD1-001 peut bien tester des connaissances professionnelles IT. La Q&A CompTIA PD1-001 plus nouvelle vient de sortir qui peut vous aider à faciilter le cours de test préparation. Notre Q&A comprend les meilleurs exercices, test simulation et les réponses.

Est-ce que vous vous souciez encore de réussir le test CompTIA PD1-001? Est-ce que vous attendez plus le guide de formation plus nouveaux? Le guide de formation vient de lancer par Pass4Test peut vous donner la solution. Vous pouvez télécharger la partie de guide gratuite pour prendre un essai, et vous allez découvrir que le test n'est pas aussi dur que l'imaginer. Pass4Test vous permet à réussir 100% le test. Votre argent sera tout rendu si vous échouez le test.

Votre vie changera beaucoup après d'obtenir le Certificat de CompTIA PD1-001. Tout va améliorer, la vie, le boulot, etc. Après tout, CompTIA PD1-001 est un test très important dans la série de test Certification CompTIA. Mais c'est pas facile à réussir le test CompTIA PD1-001.

Beaucoup de gens trouvent difficile à passer le test CompTIA PD1-001, c'est juste parce que ils n'ont pas bien choisi une bonne Q&A. Vous penserez que le test CompTIA PD1-001 n'est pas du tout autant dur que l'imaginer. Le produit de Pass4Test non seulement comprend les Q&As qui sont impressionnées par sa grande couverture des Questions, mais aussi le service en ligne et le service après vendre.

Code d'Examen: PD1-001
Nom d'Examen: CompTIA (CompTIA PDI+ Beta Exam)
Questions et réponses: 861 Q&As

PD1-001 Démo gratuit à télécharger: http://www.pass4test.fr/PD1-001.html

NO.1 A customer is concerned about excessive media jamming in their device. Which of the following is the
FIRST thing a technician should check?
A.Media feed rollers
B.Cassette drawers
C.Fusing section
D.Device log data
Answer: D

CompTIA examen   certification PD1-001   PD1-001 examen

NO.2 A polygon mirror is part of which of the following assemblies?
A.Laser unit
B.Developer unit
C.Charge assembly
D.Fuser assembly
Answer: A

CompTIA   PD1-001   PD1-001   certification PD1-001

NO.3 In which of the following sections of an MFP would a technician find a Xenon Lamp?
A.The paper feed section
B.The fuser section
C.The scanner section
D.The transfer section
Answer: C

certification CompTIA   PD1-001 examen   PD1-001

NO.4 Which of the following components is part of the ink dispersion system?
A.Print Heads
B.Cleaning heads
C.Pickup Roller
D.Charge Assembly
Answer: A

CompTIA   certification PD1-001   certification PD1-001

NO.5 The polygon mirror is located in which of the following components?
A.Developer unit
B.Scanner unit
C.Fuser unit
D.Laser unit
Answer: D

CompTIA   PD1-001   PD1-001

NO.6 Which of the following functions is associated with the developer unit?
A.Supplies toner to the photoconductor
B.Charges the surface of the photoconductor
C.Writes the latent image on the photoconductor
D.Cleans the photoconductor
Answer: A

CompTIA   PD1-001 examen   PD1-001

NO.7 During the photoconductor preparation step, residual charge can be removed by which of the
following? (Select TWO).
A.Pressure
B.Oil
C.Light
D.Gravity
E.Electrical Charge
Answer: CE

CompTIA   PD1-001   PD1-001   PD1-001   PD1-001 examen

NO.8 Which of the following is a reason black toner is used in color printers?
A.It decreases the print speed in color laser printers.
B.It prevents moir patterns when printing color photographs.
C.It reduces the cost per page when printing gray scale documents.
D.It makes the color toner resistant to smudging when wet.
Answer: C

CompTIA   certification PD1-001   PD1-001   PD1-001   PD1-001 examen

NO.9 How many CCDs are located in a single pass duplex ADF?
A.One
B.2
C.3
D.4
Answer: B

certification CompTIA   PD1-001   certification PD1-001   PD1-001   PD1-001

NO.10 The customer has a dedicated ink jet fax machine that is used to send and receive faxes only from the
corporate office. The user complains of streaks on the received faxes while the internal self-prints are fine.
Which of the following should a technician recommend?
A.Clean the scanner glass on the distant machine.
B.Clean the scanner glass on the local machine.
C.Clean the printer head on the local machine.
D.Call the telephone company to increase the line signal level.
Answer: A

CompTIA   PD1-001   PD1-001 examen   PD1-001 examen

NO.11 Which of the following would be the BEST process for the technician to follow when beginning to
diagnose a unit at a customers site?
A.Check the printers error log, and then inform the primary user what the issue is.
B.Go directly to the printer and investigate any issues that are found.
C.Investigate the printers status, then ask the primary user to write down what they think is wrong.
D.Gather information from the primary user, and then evaluate the printers condition.
Answer: D

CompTIA examen   PD1-001 examen   PD1-001   PD1-001

NO.12 When is it advisable to dump the waste toner from a technicians service vacuum?
A.When it is full.
B.It is not recommended.
C.Before performing preventative maintenance.
D.After each call.
Answer: B

certification CompTIA   PD1-001   PD1-001   PD1-001

NO.13 An encoder sensor typically detects:
A.paper position.
B.shaft rotation.
C.magnetic flux.
D.laser beam strength.
Answer: B

CompTIA   PD1-001   PD1-001 examen

NO.14 Using the CMYK color model, the color purple is produced by combining cyan and which other color?
A.Green
B.Magenta
C.Yellow
D.Black
Answer: B

CompTIA examen   PD1-001   PD1-001   PD1-001   PD1-001   certification PD1-001

NO.15 Which of the following stages in the laser print process attracts toner to the latent image on the
photoconductor?
A.Writing
B.Fusing
C.Development
D.Transfer
Answer: C

CompTIA   PD1-001   PD1-001   certification PD1-001   PD1-001

NO.16 Which of the following utilities could be used to determine a subnet mask?
A.PING
B.NSLOOKUP
C.TRACERT
D.IPCONFIG
Answer: D

CompTIA   PD1-001 examen   PD1-001

NO.17 The proper safety guidelines for handling any device specific consumables can be found in which of
the following documentation?
A.Material Safety Data Sheets
B.Installation Guides
C.Consumer Reports
D.Devices Parts Catalog
Answer: A

CompTIA examen   PD1-001   PD1-001   PD1-001   PD1-001

NO.18 A technician is troubleshooting a network connectivity issue on a MFD and would like to eliminate the
possibility of another device on the network having the same IP address. The technician should:
A.disconnect the MFD and ping the IP address.
B.disconnect the MFD and ping the subnet mask.
C.disconnect the MFD and ping the loopback address.
D.run the ipconfig command from the command prompt.
Answer: A

CompTIA examen   certification PD1-001   PD1-001   PD1-001 examen   PD1-001

NO.19 Which of the following is the purpose of a torque limiter in a roller?
A.To reduce wear and tear on rollers.
B.To provide resistance but still allow some slippage.
C.To limit the amount of movement by media.
D.To make it easier to replace rollers.
Answer: B

CompTIA examen   PD1-001 examen   PD1-001 examen   PD1-001 examen   certification PD1-001

NO.20 A customer has installed a new computer on their network. They can print to the printer but the option
for duplex printing is not available. All other computers have the option. Which of the following is the
cause of the problem?
A.The new computer is printing to the wrong IP address.
B.The new computer is using the wrong protocol.
C.The driver port is not setup correctly.
D.The option has not been selected on the driver.
Answer: D

CompTIA examen   PD1-001   PD1-001   PD1-001

Choisissez le Pass4Test, choisissez le succès. Le produit offert par Pass4Test vous permet à réussir le test CompTIA PD1-001. C'est necessaire de prendre un test simulation avant participer le test réel. C'est une façon bien effective. Choisir Pass4Test vous permet à réussir 100% le test.