Pass4Test est un site à offrir les Q&As de tout les tests Certification IT. Chez Pass4Test, vous pouvez trouvez de meilleurs matériaux. Nos guides d'étude vous permettent de réussir le test Certification Microsoft 70-544-VB sans aucune doute, sinon nous allons rendre votre argent d'acheter la Q&A et la mettre à jour tout de suite, en fait, c'est une situation très rare. Bien que il existe plusieurs façons à améliorer votre concurrence de carrière, Pass4Test est lequel plus efficace : Moins d'argent et moins de temps dépensés, plus sûr à passer le test Certification. De plus, un an de service après vendre est gratuit pour vous.
Le test simulation offert par Pass4Test est bien proche du test réel. Vous pouvez apprendre tous essences d'un test réel à courte terme avec l'aide de Pass4Test. Pass4Test peut vous assurer le succès 100% de test Microsoft 70-544-VB.
Le produit de Pass4Test peut assurer les candidats à réussir le test Microsoft 70-544-VB à la première fois, mais aussi offrir la mise à jour gratuite pendant un an, les clients peuvent recevoir les ressources plus nouvelles. Pass4Test n'est pas seulement un site, mais aussi un bon centre de service.
Code d'Examen: 70-544-VB
Nom d'Examen: Microsoft (TS: Ms Virtual Earth 6.0, Application Development)
Questions et réponses: 67 Q&As
Si vous faites toujours la lutte contre le test Microsoft 70-544-VB, Pass4Test peut vous aider à résoudre ces difficultés avec ses Q&As de qualité, et atteindre le but que vous avez envie de devenir un membre de Microsoft 70-544-VB. Si vous avez déjà décidé à s'améliorer via Microsoft 70-544-VB, vous n'avez pas aucune raison à refuser Pass4Test. Pass4Test peut vous aider à passer le test à la première fois.
Le guide d'étude de Pas4Test comprend l'outil de se former et même que le test de simulation très proche de test réel. Pass4Test vous permet de se forcer les connaissances professionnelles ciblées à l'examen Certification Microsoft 70-544-VB. Il n'y a pas de soucis à réussir le test avec une haute note.
Vous Microsoft 70-544-VB pouvez télécharger le démo Microsoft 70-544-VB gratuit dans le site Pass4Test pour essayer notre qualité. Une fois vous achetez le produit de Pass4Test, nous allons faire tous effort à vous aider à réussir le test à la première fois et vous laisser savoir qu'il ne faut pas beaucoup de travaux pour réussir ce que vous voulez.
Dans ce monde d'informatique, l'industrie IT est suivi par de plus en plus de ges. Dans ce domaine demandant beaucoup de techniques, il faut des Certificat à se preuver les techniques professionnelle. Les Certificats IT sont improtant pour un interviewé pendant un entretien. C'est pas facile à passer le test Microsoft 70-544-VB, donc c'est pourquoi beaucoup de professionnels qui choisissent ce Certificat pour se preuver.
70-544-VB Démo gratuit à télécharger: http://www.pass4test.fr/70-544-VB.html
NO.1 You deploy a Virtual Earth 6.0 application that uses Microsoft ASP.NET Asynchronous JavaScript and
XML (AJAX) implementation to retrieve data.
The myAjaxCallback function evaluates any AJAX response. The function contains the following code
segment. (Line numbers are included for reference only.)
At the time the request was made, the server was overloaded. When the server processed the AJAX
request, the server returned an error message.
You need to ensure that the application does not produce a fatal exception due to the error generated
from the AJAX response.
Which code segment should you insert at line 03?
A. If(xmlHttp.status == 200){
eval(xmlHttp.responseText);
}
else{
// Update user with status here.
}
B. try{
eval(xmlHttp.responseText);
}
catch(error){
// Update user with status here.
}
C. try{
eval(xmlHttp.responseText);
}
catch(error){
eval(xmlHttp.responseXML);
}
D. try{
eval(xmlHttp.responseText);
}
catch(error){
if(xmlHttp.status == 200){
eval(xmlHttp.responseText);
}
}
Answer: A
Microsoft examen 70-544-VB 70-544-VB 70-544-VB certification 70-544-VB
NO.2 You are writing a code segment for a Virtual Earth 6.0 application. The code segment returns data for
multiple locations to a client-side JavaScript function that makes the initial request.
The returned data contains the following properties for each location:
ID
Latitude
Longitude
Address
You need to format all locations and their properties in JavaScript Object Notation (JSON) format.
Which code segment should you use?
A. var results = new Array();
results[0] = 123;
results[1] = 40.0;
results[2] = -74.0;
results[3] = " 123 Main St .";
B. var results = new Array();
results[0] = new Array();
results[0][0] = 123;
results[0][1] = 40.0;
results[0][2] = -74.0;
results[0][3]= " 123 Main St .";
C. var results = {
ID: 123,
Latitude: 40.0,
Longitude: -74.0,
Address: " 123 Main St ."
};
D. var results = {
0:{
ID: 123,
Latitude: 40.0,
Longitude: -74.0,
Address: " 123 Main St "
}
};
Answer: D
Microsoft 70-544-VB 70-544-VB 70-544-VB 70-544-VB examen 70-544-VB
NO.3 You are creating a custom tile set by using Microsoft MapCruncher.
The tile set must overlay a weather map image in a Virtual Earth 6.0 application by using MapCruncher.
You need to perform two tasks before using MapCruncher to create the custom tile set.
Which two tasks should you perform? (Each correct answer presents part of the solution. Choose two.)
A. Split the weather map image into tiles.
B. Obtain the latitude and longitude coordinates for the corners of the weather map image.
C. Apply the proper alpha filter to the weather map image to display any transparent portions on the
Virtual Earth map.
D. Obtain low resolution weather map images for low zoom levels and high resolution weather map
images for high zoom levels.
Answer: B AND C
Microsoft 70-544-VB 70-544-VB examen certification 70-544-VB
NO.4 A Virtual Earth 6.0 application loads locations from a local Microsoft SQL Server 2005 database. You
update locations in the database manually.
You plan to automate the manual process.
You need to ensure that the automation process updates the maximum number of locations in the least
amount of time.
What should you do?
A. Call the Find method for each location by using Microsoft MapPoint Web Service.
B. Call the FindAddress method for each location by using Microsoft MapPoint Web Service.
C. Push all locations to Customer Data Services by using the UploadSpecification class, and retrieve the
results.
D. Push all locations to Customer Data Services by using the BatchGeocodeSpecification class, and
retrieve the results.
Answer: D
Microsoft 70-544-VB examen certification 70-544-VB 70-544-VB examen 70-544-VB
NO.5 Your Microsoft MapPoint Web Service (MWS) User Id is 124566, and your MWS password is
P@ssw0rd.
You need to use MWS to create an application.
Which code segment should you use?
A. Dim appCredential As New System.Net.NetworkCredential("124566", "P@ssw0rd")
B. Dim appCredential = New System.Security.Principal.NTAccount("124566", "P@ssw0rd")
C. Dim appCredential As New System.Security.Principal.GenericIdentity("124566", "P@ssw0rd")
D. Dim appCredential As New System.EnterpriseServices.SecurityIdentity("124566", "P@ssw0rd")
Answer: A
certification Microsoft 70-544-VB certification 70-544-VB 70-544-VB 70-544-VB certification 70-544-VB
NO.6 You are creating a Virtual Earth 6.0 application that retrieves locations from a Microsoft SQL Server
2005 database.
A stored procedure will be used to retrieve only locations that lie within the currently displayed map area.
You need to define the boundary within which the locations displayed on the map must lie.
How should you define the boundary?
A. points represented by the bottom-right and top-left pixel coordinates
B. points represented by the bottom-right and top-left latitude and longitude coordinates
C. the center point of a circle whose radius is equal to the size of the map based on pixel coordinates
D. the center point of a circle whose radius is equal to the size of the map based on latitude and longitude
coordinates
Answer: B
certification Microsoft 70-544-VB examen certification 70-544-VB 70-544-VB
NO.7 You are updating a Virtual Earth 6.0 store locator. A database table named Stores contains the City and
State fields. A Microsoft SQL Server 2005 function named CalculateDistance measures the distance
between two points.
The store locator contains a stored procedure named LookupStores that retrieves the names of stores
located in a given city and state. The city and state are passed in as parameters to the stored procedure.
You need to extend the store locator to support a proximity search within a given radius.
Which two tasks should you perform? (Each correct answer presents part of the solution. Choose two.)
A. Add a Radius field to the Stores table.
B. Add a Distance field to the Stores table.
C. Add Latitude and Longitude fields to the Stores table.
D. Extend the LookupStores stored procedure to use CalculateDistance.
E. Create a new stored procedure that uses CalculateDistance along with the result set from the
LookupStores stored procedure.
F. Create a new stored procedure that uses CalculateDistance along with the entire data set from the
Stores table.
Answer: C AND F
certification Microsoft 70-544-VB examen 70-544-VB examen certification 70-544-VB 70-544-VB
NO.8 You are integrating third-party data into a Virtual Earth 6.0 application. The data that is retrieved from
the third party is stored in an array named Results. The Results array is stored inside a Web handler. The
data is stored in the following format.
The Web handler uses the GeoRSSFeed class to accept items of type GeoRSSItem. The class contains
the ToString() method that writes the GeoRSS feed to a string.
The Web handler GeoRSS integration is defined by the following code segment. (Line numbers are
included for reference only.)
You need to encode the data inside the Results array into the GeoRSS format.
Which code segment should you insert at line 05?
A. Dim objEnumerator As IEnumerator
Dim Keys As Collections.Generic.Dictionary(Of String, _ String).KeyCollection = Results(i).Keys()
Dim curKey As String
objEnumerator = Keys.GetEnumerator()
Do While objEnumerator.MoveNext
curKey = objEnumerator.Current
curItem.Add(curKey, Results(i)(curKey))
Loop
B. curItem.Add("title", Results(i)("name"))
curItem.Add("description", Results(i)("address"))
curItem.Add("latitude", Results(i)("latitude"))
curItem.Add("longitude", Results(i)("longitude"))
curItem.Add("icon", Results(i)("thumbnail"))
C. curItem.Add("title", Results(i)("name"))
curItem.Add("description", String.Format("{0}|{1}", _
Results(i)("address"), Results(i)("thumbnail")))
curItem.Add("latitude", Results(i)("latitude"))
curItem.Add("longitude", Results(i)("longitude"))
D. curItem.Add("name", Results(i)("name"))
curItem.Add("address", string.Format("{0}|{1}", _
Results(i)("address"), Results(i)("thumbnail"))
curItem.Add("latitude", Results(i)("latitude"))
curItem.Add("longitude", Results(i)("longitude"))
Answer: C
Microsoft examen certification 70-544-VB 70-544-VB examen 70-544-VB examen 70-544-VB 70-544-VB
NO.9 You are creating a Virtual Earth 6.0 application. The application will use data that is stored in the
Microsoft MapCruncher output format.
The MapCruncher output is defined in the following manner:
var tileSrc = http://dev.live.com/virtualearth/sdk/layers/layer1
You need to ensure that the application displays the data as a new layer on the Virtual Earth map.
Which code segment should you use?
A. var tileSourceSpec = new VETileSourceSpecification("layer1/%4.png", tileSrc);
map.AddTileLayer(tileSourceSpec, true);
B. var tileSourceSpec = new VETileSourceSpecification("layer1", tileSrc + /%4);
map.AddTileLayer(tileSourceSpec, true);
C. var tileSourceSpec = new VETileSourceSpecification("layer1", tileSrc + "/%4.png");
map.AddTileLayer(tileSourceSpec, true);
D. var tileSourceSpec = new VETileSourceSpecification("layer1", tileSrc + /%1.png);
map.AddTileLayer(tileSourceSpec, true);
Answer: C
Microsoft 70-544-VB 70-544-VB 70-544-VB examen
NO.10 You are managing Microsoft MapPoint Web Service (MWS) data in an application by using the
Customer Services site. The application uses the DS_ONE data source stored on the Customer Services
site.
The application displays several records in the wrong locations on the map.
You need to display these records correctly on the map.
What should you do?
A. View the data source geocoding results. Filter on match code. Manually edit all the resulting locations
through the Customer Services site.
B. Download the data source. Remove the latitude and longitude data. Re-upload the corrected data to
the Customer Services site.
C. Download the data source. Update all the locations by using a Find or FindAddress call. Re-upload the
corrected data to the Customer Services site.
D. Download the data source. Update each bad geocode by using a Find or FindAddress call. Re-upload
the corrected data to the Customer Services site.
Answer: A
certification Microsoft certification 70-544-VB 70-544-VB examen
Généralement, les experts n'arrêtent pas de rechercher les Q&As plus proches que test Certification. Les documentations offertes par les experts de Pass4Test peuvent vous aider à passer le test Certification. Les réponses de nos Q&As ont une précision 100%. C'est facile à obtenir le Certificat de Microsoft après d'utiliser la Q&A de Pass4Test. Vous aurez une space plus grande dans l'industrie IT.
没有评论:
发表评论