2013年11月4日星期一

Certification Novell de téléchargement gratuit pratique d'examen 50-707, questions et réponses

C'est pas facile à passer le test Certification Novell 50-707, choisir une bonne formation est le premier bas de réussir, donc choisir une bonne resource des informations de test Novell 50-707 est l'assurance du succès. Pass4Test est une assurance comme ça. Une fois que vous choisissez le test Novell 50-707, vous allez passer le test Novell 50-707 avec succès, de plus, un an de service en ligne après vendre est gratuit pour vous.

Si vous hésitez encore à nous choisir, vous pouvez tout d'abord télécharger le démo gratuit dans le site Pass4Test pour connaître mieux la fiabilité de Pass4Test. Nous avons la confiance à vous promettre que vous allez passer le test Novell 50-707 à la première fois.

Code d'Examen: 50-707
Nom d'Examen: Novell (Novell Open Enterprise Server for Netware Adanced Admin)
Questions et réponses: 186 Q&As

L'équipe de Pass4Test autorisée offre sans arrêt les bonnes resources aux candidats de test Certification Novell 50-707. Les documentations particulièrement visée au test Novell 50-707 aide beaucoup de candidats. La Q&A de la version plus nouvelle est lancée maintenant. Vous pouvez télécharger le démo gratuit en Internet. Généralement, vous pouvez réussir le test 100% avec l'aide de Pass4Test, c'est un fait preuvé par les professionnels réputés IT. Ajoutez le produit au panier, vous êtes l'ensuite à réussir le test Novell 50-707.

Pass4Test est aussi un site d'offrir la ressource des connaissances pour le test Certification IT. Selon les Feedbacks venus de gens qui ont untilié les produits de Pass4Test, Pass4Test est un site fiable comme l'outil de se former. Les Q&As offertes par Pass4Test sont bien précises. Les experts de Pass4Test mettent à jour nos documentations de formation de temps de temps.

Le test simulation offert par Pass4Test est bien proche du test réel. Vous pouvez apprendre tous essences d'un test réel à courte terme avec l'aide de Pass4Test. Pass4Test peut vous assurer le succès 100% de test Novell 50-707.

Les spécialiste profitant leurs expériences et connaissances font sortir les documentations particulière ciblées au test Novell 50-707 pour répondre une grande demande des candidats. Maintenant, la Q&A plus nouvelle, la version plus proche de test Novell 50-707 réel est lancée. C'est possible à réussir 100% avec le produit de Novell 50-707. Si malheureusement, vous ne passez pas le test, votre argent sera tout rendu. Vous pouvez télécharger le démo gratuit en Internet pour examiner la qualité de Q&A. N'hésitez plus d'ajouter le produit au panier, Pass4Test peut vous aider à réussir le rêve.

50-707 Démo gratuit à télécharger: http://www.pass4test.fr/50-707.html

NO.1 While migrating a NetWare 6 server to OES NetWare, you see errors indicating Nuwagent.nlm won't
load. Which server console command will fix this problem?
A. SMDR NEW
B. KILL NUWAGENT
C. REINITIALIZE SYSTEM
D. LOAD NUWAGENT.NLM -NEW
Answer: A

Novell examen   certification 50-707   50-707   50-707 examen

NO.2 You manage a single-server network for a small business. Currently, your server is running NetWare
5.1. You need to implement OES NetWare. You don't have the budget to purchase additional hardware.
Which option is the best method for implementing OES NetWare?
A. In-place upgrade
B. In-place migration
C. Across-the-wire migration
D. Compatibility-mode upgrade
Answer: A

Novell   50-707 examen   50-707

NO.3 Which SET parameter will cause the server to attempt to recover from all software and hardware
abends, wait a specified amount of time, and then restart the operating system?
A. SET AUTO RESTART AFTER ABEND = 0
B. SET AUTO RESTART AFTER ABEND = 1
C. SET AUTO RESTART AFTER ABEND = 2
D. SET AUTO RESTART AFTER ABEND = 3
Answer: C

Novell   50-707   50-707   certification 50-707

NO.4 Which server console command will remove a Backup Domain Controller (BDC) from a CIFS domain?
A. CIFS REMOVE BDC
B. CIFS BDC REMOVE
C. CIFS DOMAIN LEAVE
D. CIFS DOMAIN DELETE
Answer: C

Novell   50-707   50-707

NO.5 Which Distributed File System component maps the physical location of the NSS volumes in the
eDirectory tree?
A. GUIDs
B. Junctions
C. VLDB Database
D. DFS Management Context
Answer: C

certification Novell   certification 50-707   50-707   50-707 examen

NO.6 Which instance of Apache Web Server running on an OES NetWare server is used to manage other
services on the server, such as iPrint and eGuide?
A. Slave Instance
B. Public Instance
C. Master Instance
D. Management Instance
E. TCP Wrapper Instance
F. Administration Instance
Answer: F

Novell examen   50-707   certification 50-707

NO.7 Which versions of NetWare are supported as source server operating systems by Migration Wizard
8.1? (Choose 3.)
A. NetWare 3.1
B. NetWare 3.2
C. NetWare 4.1
D. NetWare 4.11
E. NetWare 4.2
F. NetWare 5.0
G. NetWare 5.1
H. NetWare 6.5
Answer: FGH

Novell   certification 50-707   50-707 examen   50-707

NO.8 You're migrating a NetWare 5.0 server named DA4 to OES NetWare. DA4 resides in the DA-TREE in
the TYO.DA context. It has been configured to use the IPX protocol and uses the 802.2 frame type. The
destination OES NetWare server has been assigned a server name of DA4-TEMP. This server has also
been configured to use the IPX protocol with the 802.3 frame type. It resides in the .TEMP context in the
TEMP-TREE eDirectory tree. DA4 and DA4-TEMP are unable to communication with each other. What
will fix this problem?
A. Configure the IP protocol on DA4-TEMP.
B. Rename the TEMP-TREE eDirectory tree to DA-TREE.
C. Configure both servers to use the same frame type.
D. Install DA4-TEMP into the TYO.DA context in the TEMP-TREE eDirectory tree.
E. Rename the DA4-TEMP server to DA4, but leave it in the TEMP-TREE eDirectory tree.
Answer: C

Novell   50-707   50-707 examen

NO.9 You need to repair the Volume Locator Database on your OES NetWare server. You've accessed the
properties of the server object in ConsoleOne and have selected the Repair button on the Supported
Services > NSS VLDB tab. Which repair option will restore the last saved copy of your VLDB database
backup files?
A. Restore
B. Low-Level Repair
C. Rebuild Database
D. Repair Database from Backup
E. Get Database From Another Replica
Answer: B

Novell   50-707 examen   50-707   50-707

NO.10 You want to add a new volume to your OES NetWare server. You've installed a 200 GB SCSI hard disk
drive in the system. You plan to create a single partition on this drive. You plan to create a new NSS pool
on the server and add the new partition to it. You plan to create a single NSS volume named
EXTRA_SPACE in this pool. You plan to use the overbooking feature of NSS to allocate 275 GB of space
to the EXTRA_SPACE volume. Can you do this?
A. Yes, all NSS requirements have been met.
B. No, NSS pools must be composed of two or more partitions.
C. No, the size of a single volume in an NSS pool can not exceed the size of the pool.
D. No, the overbooked size of an NSS volume can't exceed 120% of the size of its NSS pool.
Answer: C

certification Novell   50-707 examen   50-707

NO.11 You are migrating a NetWare 5.1 server to OES NetWare. The source server name is SLCFIN and is
located in FINANCE. SLC. DA in the DA-TREE. You install the pre-migration OES NetWare server as
SLCFIN located in .DA in the TEMP-TREE. Why will the migration fail?
A. The source tree name must be the same as the destination tree name.
B. The source server name can't be the same as the destination server name.
C. The source server context must be the same as the destination server context.
D. The source tree name and the source server context must be the same as the destination tree name
and destination tree context.
E. You can't migrate a NetWare 5.1 server directly to OES NetWare. You must first upgrade it to a
NetWare 6.0 server, then migrate it to OES NetWare.
Answer: B

Novell   50-707   50-707   certification 50-707   50-707

NO.12 Which server console command will load the NSS Volume Locator Database Management service on
an OES NetWare server?
A. VLDB
B. NVLDB
C. VLDBM
D. VLRPR
E. NVLDBM
Answer: A

Novell examen   50-707 examen   50-707   certification 50-707

NO.13 Which statement best describes a multitasking operating system?
A. Data is distributed between processors to prevent over-utilization.
B. A single-processor can run 2 or more programs at the same time.
C. Multiple threads can be run on different processors at the same time.
D. Application threads can simultaneously be executed on different processors.
E. A system can determine if a processor is over-utilized and initiate load balancing.
Answer: B

Novell examen   50-707   50-707 examen

NO.14 To balance the load in your network, you want to split heavily used volume USERS, an NSS volume, on
FS1. You decide to split the volume at the USERS:\EXTERNAL\CONTRACTORS subdirectory. The
destination volume is an NSS volume on server FS2. Given that both servers are OES NetWare servers
in the same DFS Management context, can this be done?
A. No, you must apply Support Pack 1.1 or later.
B. No, you can't split a volume at the subdirectory level.
C. No, you can't split an NSS volume to another NSS volume.
D. No, the servers must reside in different DFS Management Contexts.
E. Yes, the prerequisite requirements for this move request have been met.
F. No, split operations for NSS volumes can only occur between servers in different contexts.
Answer: E

Novell   50-707   certification 50-707   certification 50-707

NO.15 You need to grant the IS.SLC. DA container Read and File Scan rights to the Data:\Apps directory on
your OES NetWare server. Which utilities could you use to do this? (Choose 2.)
A. Flag
B. iMonitor
C. iManager
D. ConsoleOne
E. Rights Manager
F. Remote Manager
Answer: DF

Novell examen   50-707   50-707 examen   certification 50-707

NO.16 After migrating a NetWare 6.5 server to another NetWare 6.5 server, which directories do you need to
copy from the migration backup directory to the corresponding directories on the destination server?
(Choose 2.)
A. Sys:\Sys.mig\Etc
B. Sys:\Sys.mig\Java
C. Sys:\Sys.mig\Ipconf
D. Sys:\Sys.mig\System
E. Sys:\Sys.mig\Nds.001
F. Sys:\Sys.mig\Apache2
Answer: BC

Novell examen   50-707   50-707

NO.17 You have configured a DFS Management Context with the VLDB service running on DA1. In the
SHARED directory on DA1's DATA volume, you created a junction to the root of the VOL1 volume on DA2.
You then created a CIFS share for the SHARED directory and granted the appropriate rights to your user
and group objects to access the directory. When users access the junction from their Windows 2000
Professional workstations without the Novell Client installed, it fails to take them to VOL1 on DA2. Which
is the resolution to this problem?
A. Load VLDB. NLM on DA2.
B. Add a VLDB replica to DA2.
C. Enable DFS support for CIFS clients.
D. Upgrade the workstations to Windows XP Home or Professional.
E. Run the VERIFY utility to check the integrity of the pool where VOL1 resides on DA2.
Answer: C

Novell examen   50-707 examen   50-707 examen   certification 50-707   50-707   50-707

NO.18 You need to migrate your existing NetWare server, which is running NetWare 5.0, to NetWare 6.0.
You've installed Migration Wizard 8.1 on your Windows 2000 Professional workstation, which also has the
Novell Client 4.91 installed. You've installed the latest Support Packs on both your source and destination
servers. Does this scenario meet Migration Wizard 8.1 system requirements?
A. Yes, all system requirements have been met.
B. No, you need to bind IPX on the destination server.
C. No, Migration Wizard 8 doesn't support Novell Client 4.83.
D. No, Migration Wizard 8 doesn't support NetWare 5.0 source servers.
E. No, Migration Wizard 8 doesn't support Windows 2000 Professional.
F. No, Migration Wizard 8 doesn't support NetWare 6.0 destination servers.
G. No, you shouldn't have installed a Support Pack on the destination server.
Answer: A

certification Novell   certification 50-707   50-707   50-707

NO.19 Which changes are made to the destination server's Autoexec.ncf file by the Migration Wizard during
the migration process? (Choose 2.)
A. The time server type is changed to Single Reference.
B. The server name is changed to match the name of the source server.
C. The CIFS user context is changed to match the CIFS user context of the source server.
D. The bindery context value is changed to match the bindery context used on source server.
E. The time zone value is changed to match that of the closest Single Reference time provider.
F. The server ID is modified to match the IPX internal net number or server ID of the source server.
Answer: BF

Novell examen   certification 50-707   50-707   50-707 examen

NO.20 What can a DFS junction point to?
A. A CIFS sharepoint.
B. A subdirectory on a volume on the local server.
C. A subdirectory on a volume on a remote server in the same eDirectory tree.
D. A subdirectory on a volume on a remote server in a different eDirectory tree.
E. The root directory of a volume on a remote server in the same eDirectory tree.
F. The root directory of a volume on a remote server in a different eDirectory tree.
Answer: E

Novell   50-707 examen   50-707 examen

NO.21 Which option moves an existing NetWare server's file system and the eDirectory database to a
different computer?
A. Remote Upgrade
B. In-place Upgrade
C. Down-Server Upgrade
D. Across-the-Wire Upgrade
E. Across-the-Wire Migration
F. Compatibility-Mode Migration
Answer: E

Novell   50-707 examen   50-707 examen

NO.22 Which server console command is used to verify the consistency of the cryptographic keys on your
server required to communicate with other servers in the tree?
A. LOAD SECURE. NLM
B. LOAD CONFIG. NLM
C. LOAD SDIDIAG. NLM
D. LOAD MONITOR.NLM
E. LOAD PKICHECK.NLM
F. LOAD SDINOTES.NLM
G. LOAD SECUREDIAG. NLM
Answer: C

Novell   certification 50-707   50-707   50-707

NO.23 Which command can be entered at the server console of a CIFS Backup Domain Controller (BDC) to
delete an entire CIFS domain?
A. CIFS DELETE BDC
B.CIFS BDC REMOVE
C. CIFS DOMAIN LEAVE
D. CIFS DOMAIN DELETE
E. A domain can only be deleted from the server console of the domain's PDC.
Answer: E

Novell   50-707 examen   certification 50-707   certification 50-707

NO.24 Which files are used by the NSS VLDB service to track the location of NSS volumes in the eDirectory
tree? (Choose 2.)
A. VLRPR.CFG
B. VLDB. NSS
C. VLDB. MDB
D. VLDB. CONF
E. VLRPR.LOG
F. VLDBCFG. DAT
Answer: EF

certification Novell   50-707   certification 50-707   50-707 examen   50-707   50-707

NO.25 You are migrating a NetWare 5.1 server to OES NetWare. As a part of the migration, you need to
make sure that the destination server assumes the IP address of the source server. Which files should
you edit with the Migration Wizard to do this? (Choose 2.)
A. Sys:\Etc\Hosts
B. Sys:\Etc\Gateways
C. Sys:\System\Config.ncf
D. C:\Nwserver\Startup.ncf
E. Sys:\System\Attypes.cfg
F. Sys:\System\Autoexec.ncf
G. C:\Nwserver\Autoexec.ncf
Answer: AF

Novell   certification 50-707   50-707 examen   50-707

NO.26 During a migration to OES NetWare, where are important files from the source server's Sys volume
saved on the destination server?
A. Sys:\Sys.mig
B. Sys:\Sys.bak
C. Sys:\System\Sys.bak
D. Sys:\Public\Sys.mig
Answer: A

Novell   certification 50-707   50-707

NO.27 The Begin NDS/eDir Migration step in your NetWare 6 to OES NetWare migration failed. The
destination server did not reboot and take on the name and identity of the source server. You now need to
restore Directory Services on the source server. In what file did the Migration Wizard back up your
eDirectory information on the source server?
A. Sys:\System\Nds.bak
B. Sys:\System\eDir.bak
C. Sys:\_Netware\Nds.bak
D. Sys:\System\Nuw30\Ndsbu
E. Sys:\System\Nuw30\eDirbu
Answer: D

Novell   50-707   50-707   50-707 examen

NO.28 You are migrating a NetWare 5.1 server to OES NetWare. You've reached the eDirectory migration
portion of the Migration Wizard. The first step in this process edits the server name in several
configuration files on the destination server. Which files are included in this process? (Choose 2.)
A. Ctx.cfg
B. Csl.cfg
C. Slpda.cfg
D. Snmp.cfg
E. Cifsctx.cfg
F. Attypes.cfg
G. Startup.ncf
H. Rootcert.der
I. Timesync.cfg
Answer: DI

Novell   50-707   certification 50-707   50-707   50-707 examen   50-707

NO.29 Which utility is used to set the DFS Management Context?
A. NSSMU
B. iManager
C. ConsoleOne
D. DFS Manager
E. Remote Manager
Answer: C

Novell   50-707   50-707 examen

NO.30 Which server console command is used to start the ArkManager service on OES NetWare?
A. ARKMAN
B. ARKSTART
C. ARKMANAGER
D. ARKMANSTART
Answer: B

Novell   50-707 examen   50-707   50-707 examen   certification 50-707

La Q&A lancée par Pass4Test est bien poupulaire. Pass4Test peut non seulement vous permettre à appendre les connaissances professionnelles, et aussi les expériences importantes résumées par les spécialistes dans l'Industrie IT. Pass4Test est un bon fournisseur qui peut répondre une grande demande des candidats. Avec l'aide de Pass4Test, vous aurez la confiance pour réussir le test. Vous n'aurez pas aucune raison à refuser le Pass4Test.

没有评论:

发表评论