Pour vous laisser savoir mieux que la Q&A Alcatel-Lucent 4A0-101 produit par Pass4Test est persuadante, le démo de Q&A Alcatel-Lucent 4A0-101 est gratuit à télécharger. Sous l'aide de Pass4Test, vous pouvez non seulement passer le test à la première fois, mais aussi économiser vos temps et efforts. Vous allez trouver les questions presque même que lesquels dans le test réel. C'est pourquoi tous les candidats peuvent réussir le test Alcatel-Lucent 4A0-101 sans aucune doute. C'est aussi un symbole d'un meilleur demain de votre carrière.
Ajoutez le produit de Pass4Test au panier, vous pouvez participer le test avec une 100% confiance. Bénéficiez du succès de test Alcatel-Lucent 4A0-101 par une seule fois, vous n'aurez pas aucune raison à refuser.
Code d'Examen: 4A0-101
Nom d'Examen: Alcatel-Lucent (Alcatel-Lucent Interior Routing Protocols and High Availability)
Questions et réponses: 177 Q&As
La partie plus nouvelle de test Certification Alcatel-Lucent 4A0-101 est disponible à télécharger gratuitement dans le site de Pass4Test. Les exercices de Pass4Test sont bien proches de test réel Alcatel-Lucent 4A0-101. En comparaison les Q&As dans les autres sites, vous trouverez que les nôtres sont beaucoup plus complets. Les Q&As de Pass4Test sont tout recherchés par les experts de Pass4Test, y compris le test simulation.
Pass4Test est un site professionnel qui répondre les demandes de beaucoup clients. Les candidats qui ont déjà passer leurs premiers test Certification IT ont devenus les suivis de Pass4Test. Grâce à la bonne qualité des documentations, Pass4Test peut aider tous candidats à réussir le test Alcatel-Lucent 4A0-101.
Pass4Test a de formations plus nouvelles pour le test Alcatel-Lucent 4A0-101. Les experts dans l'industrie IT de Pass4Test profitant leurs expériences et connaissances professionnelles à lancer les Q&As plus chaudes pour faciliter la préparation du test Alcatel-Lucent 4A0-101 à tous les candidats qui nous choisissent. L'importance de Certification Alcatel-Lucent 4A0-101 est de plus en plus claire, c'est aussi pourquoi il y a de plus en plus de gens qui ont envie de participer ce test. Parmi tous ces candidats, pas mal de gens ont réussi grâce à Pass4Test. Ces feedbacks peuvent bien prouver nos produits essentiels pour votre réussite de test Certification.
4A0-101 Démo gratuit à télécharger: http://www.pass4test.fr/4A0-101.html
NO.1 What causes an adjacency to change from down to two ways?
A. When a link state update is received in response to a link state request.
B. When a router receives a Hello packet that contains its own router ID in the neighbor list from a
neighbor.
C. When a router receives a database description packet from a neighbor.
D. When a link state acknowledgement is received in response to a link state update.
Answer: B
Alcatel-Lucent 4A0-101 4A0-101 examen
NO.2 Click the exhibit button.
A static route is created on router R1, using the "static-route 0.0.0.0/ 0 next-hop 10.3.3.2"
command. What command can be used to test the static route on an Alcatel-Lucent 7750 SR?
A. ping static 10.5.5.5
B. ping static 0.0.0.0/ 0
C. ping 10.5.5.5
D. ping 0.0.0.0
Answer: C
Alcatel-Lucent 4A0-101 certification 4A0-101 4A0-101
NO.3 There is an IP host with IP address 10.2.3.1. A static route is created, using the "configure
router static-route 10.2.3.0/ 24 next-hop 10.1.2.1" command. What is the correct traceroute
command to test this static route on an Alcatel-Lucent 7750 SR?
A. traceroute 10.2.3.1
B. traceroute 10.2.3.1 next-hop 10.1.2.1
C. traceroute next-hop 10.1.2.1
D. traceroute does not work on the Alcatel-Lucent 7750 SR.
E. traceroute 10.1.2.1
Answer: A
Alcatel-Lucent certification 4A0-101 certification 4A0-101 4A0-101 4A0-101 examen certification 4A0-101
15. What is the default preference value for a static route in the Alcatel-Lucent 7750 SR?
A. 0
B. 5
C. 10
D. 15
Answer: B
Alcatel-Lucent certification 4A0-101 certification 4A0-101 4A0-101
16. Which of the following statements regarding distance vectors protocols are true? (Choose
two answers).
A. RIPvl, RIPv2, and BGP are distance vector protocols.
B. OSPF and IS-IS are distance vector protocols.
C. Routing tables are exchanged between neighbors; however, no routing table is transmitted
beyond the immediate neighbor.
D. Distance vector protocols use the Dijkstra SPF algorithm.
E. Routers that participate in distance vector routing protocols maintain full knowledge of distant
routers and how they interconnect
Answer: A,C
Alcatel-Lucent 4A0-101 examen certification 4A0-101 4A0-101 4A0-101
NO.4 Which of the following commands can be used to display the number of SPF computations
that have been performed on a router?
A. show router ospf area <area-id>
B. show router ospf neighbor
C. show router ospf interface
D. show router ospf status
Answer: A
certification Alcatel-Lucent certification 4A0-101 certification 4A0-101
NO.5 In an IP datagram, which of the following fields identifies the receiving application?
A. The protocol field of the transport layer header.
B. The port field of the transport layer header.
C. The protocol field of the network layer header.
D. The port field of the network layer address.
Answer: B
Alcatel-Lucent 4A0-101 4A0-101 examen 4A0-101 examen
NO.6 Click the exhibit button.
What triggers convergence of the routing protocol when the link between switch 1 and switch 2
goes down?
A. Convergence is triggered when the adjacency between routers R1 and R2 drops as a result of
Hello timeouts. At this point, both routers R1 and R2 re-compute their link state database and send
updates to their adjacent routers. Once the process is complete for all routers, the networks have
converged.
B. Convergence is triggered when the physical interfaces between routers R1 and R2 go down. At
this point, both routers R1 and R2 re-compute their link state database and send updates to their
adjacent routers. Once the process is complete for all routers, the networks have converged.
C. Convergence will not be triggered because switches cannot run routing protocols between them.
D. Convergence is triggered when the switches notify the routers about the link state information.
At this point, both routers R1 and R2 re-compute their link state database and send updates to their
adjacent routers. Once the process is complete for all routers, the networks have converged
E. Convergence is triggered when an LSA is sent from router R1 to router R2 to indicate that the link
is down. At this point, both routers R1 and R2 re-compute their link state database and sendupdates
to their adjacent routers. Once the process is complete for all routers, the networks have converged.
Answer: A
Alcatel-Lucent 4A0-101 certification 4A0-101 4A0-101 examen 4A0-101
NO.7 When a router receives an IP packet, but does not find a match in the routing table for the
destination IP address, what actions are performed by the router?
A. The packet is flooded out all router interfaces.
B. The packet is dropped and an ICMP unreachable message is sent back to the source.
C. The packet is silently discarded.
D. The packet is flooded out all interfaces and an ICMP unreachable message is sent.
Answer: B
Alcatel-Lucent 4A0-101 4A0-101 certification 4A0-101 4A0-101 examen
NO.8 Which of the following statements describe the major features of OSPF? Choose two answers.
A. Fast reroute capability
B. Control traffic prioritization
C. Route redistribution
D. Traffic engineering extensions
E. Cut through forwarding
Answer: C,D
Alcatel-Lucent certification 4A0-101 4A0-101 4A0-101 4A0-101
NO.9 Click the exhibit button.
In the topology shown, router R1 is an ASBR configured to export external routes to OSPF. Assuming
that there are no stub networks, which of the following statements regarding type 4 LSA generation
is true?
A. Router R1 generates a type 4 LSA that is flooded to areas 0, 1, and 2.
B. Router R3 generates a type 4 LSA that is flooded to areas 0, 1, and 2.
C. Router R3 generates a type 4 LSA that is flooded to areas 0 and 2.
D. Router R3 generates a type 4 LSA that is flooded to area 0, and router R6 generates a type 4 LSA
that is flooded to area 2.
Answer: D
certification Alcatel-Lucent 4A0-101 certification 4A0-101 certification 4A0-101
NO.10 Click the exhibit button.
What is the command to configure a static route on the Alcatel-Lucent 7750 SR router R1 to reach
the network behind router R2?
A. configure router static-route 139.120.121.0/ 24 next-hop 138.120.199.2
B. configure router static-route 139.120.121.0/ 24 next-hop 138.120.199.1
C. configure router static-route 138.120.199.2 / 24 next-hop 138.120.199.1
D. configure router static-route 139.120.121.0/ 24 next-hop 139.120.121.2
Answer: A
certification Alcatel-Lucent 4A0-101 examen 4A0-101 4A0-101 examen
NO.11 What are the default Hello and Dead timer intervals for OSPF on the Alcatel-Lucent 7750 SR?
A. 5 and 15 seconds
B. 10 and 30 seconds
C. 5 and 20 seconds
D. 10 and 40 seconds
Answer: D
Alcatel-Lucent examen 4A0-101 examen 4A0-101 certification 4A0-101
NO.12 Static routing will be used in a network between a corporate head office, with many
connected networks, and a branch office, with one connection to the head office. Which of the
following best describes the likely configuration?
A. The corporate head office router will have a default route and the branch site will have a more
specific static route.
B. The corporate head office router and the branch office router will both have specific static routes.
C. The corporate head office router and the branch router will both have default routes.
D. The corporate head office router will have a more specific static route and the branch office
router will have a default route.
Answer: D
Alcatel-Lucent 4A0-101 certification 4A0-101 4A0-101
NO.13 Click the exhibit button.
Routers R1, R2, and R3 are running a classful routing protocol between them. Assuming that router
R1 advertises all directly connected networks, how will these networks be represented in router
R3's routing table?
A. Router R3's routing table can only contain one of the routes, which will result in route flapping.
B. Router R3's routing table will have one entry for 10.1.1.0/ 24 and one entry for 10.1.2.0/ 24.
C. The networks will be represented with one entry of 10.0.0.0/ 8 in router R3's routing table.
D. The networks will be represented with one entry of 10.0.0.0/ 24 in router R3's route table.
Answer: C
Alcatel-Lucent examen 4A0-101 examen certification 4A0-101 certification 4A0-101 certification 4A0-101
NO.14 Which of the following statements apply to link state protocol behavior? Choose three
answers.
A. Routers broadcast the entire route table to all neighbors.
B. Information about directly connected links is sent to all neighbors.
C. An adjacency database is maintained by each router.
D. The sequence number for an update is incremented as it is flooded from router to router.
E. The topological database is the same for all routers in a single area.
Answer: B,C,E
Alcatel-Lucent examen 4A0-101 4A0-101 4A0-101 examen
Pass4Test est un site web de vous offrir particulièrement les infos plus chaudes à propos de test Certification Alcatel-Lucent 4A0-101. Pour vous assurer à nous choisir, vous pouvez télécharger les Q&As partielles gratuites. Pass4Test vous promet un succès 100% du test Alcatel-Lucent 4A0-101.
没有评论:
发表评论