Selon les feedbacks offerts par les candidats, c'est facile à réussir le test Juniper JN0-522 avec l'aide de la Q&A de Pass4Test qui est recherché particulièrement pour le test Certification Juniper JN0-522. C'est une bonne preuve que notre produit est bien effective. Le produit de Pass4Test peut vous aider à renforcer les connaissances demandées par le test Juniper JN0-522, vous aurez une meilleure préparation avec l'aide de Pass4Test.
Un bon choix de l'outil à se former est le point essentiel à passer le test Juniper JN0-522, et les documentations à propos de rechercher le test Juniper JN0-522 est toujours une part plus importante pendant la préparation de test Certification. Les Q&As offertes par les experts de Pass4Test sont presque même que les tests réels. Pass4Test est un site web particulièrement en apportant les facilités aux gens qui veulent passer le test Certification.
Dans cette société de l'information technologies, c'est bien populaire que l'on prenne la formation en Internet, Pass4Test est l'un des sites d'offrir la formation particulère pour le test Juniper JN0-522. Pass4Test a une expérience riche pour répondre les demandes des candidats.
Dans cette Industrie IT intense, le succès de test Juniper JN0-522 peut augmenter le salaire. Les gens d'obtenir le Certificat Juniper JN0-522 peuvent gagner beaucoup plus que les gens sans Certificat Juniper JN0-522. Le problème est comment on peut réussir le test plus facile?
Code d'Examen: JN0-522
Nom d'Examen: Juniper (FXV,Associate (JNCIA-FWV))
Questions et réponses: 160 Q&As
L'importance de la position de Certificat Juniper JN0-522 dans l'industrie IT est bien claire pour tout le monde, mais c'est pas facile à obtenir ce Certificat. Il y a beaucoup de Q&As qui manquent une haute précision des réponses. Cependant, Pass4Test peut offrir des matériaux pratiques pour toutes les personnes à participer l'examen de Certification, et il peut aussi offrir à tout moment toutes les informations que vous auriez besoin à réussir l'examen Juniper JN0-522 par votre première fois.
Si vous voulez ne se soucier plus à passer le test Juniper JN0-522, donc vous devez prendre la Q&A de Pass4Test comme le guide d'étude pendant la préparation de test Juniper JN0-522. C'est une bonne affaire parce que un petit invertissement peut vous rendre beaucoup. Utiliser la Q&A Juniper JN0-522 offerte par Pass4Test peut vous assurer à réussir le test 100%. Pass4Test a toujours une bonne réputation dans l'Industrie IT.
JN0-522 Démo gratuit à télécharger: http://www.pass4test.fr/jn0-522.html
NO.1 What are two benefits of configuring a ScreenOS device in transparent mode? (Choose two.)
A.There is no need to reconfigure the IP addresses of routers or protected servers.
B.There is no need to create MIPs or VIPs for incoming traffic to reach protected servers.
C.Policies are easier to create since you do not have to include source and destination IP addresses.
D.The product can support more VPNs and obtain greater throughput because there is less overhead to
manage.
Answer:A B
Juniper examen JN0-522 JN0-522 certification JN0-522
NO.2 Click the Exhibit button. In the exhibit, what is the correct command to configure a default route on the
SSG 20?
A.set route 0.0.0.0/0 vrouter untrust
B.set route 0.0.0.0/0 interface e0/4 gateway 143.45.56.254
C.set route 0.0.0.0/0 interface e0/4 next-hop 143.45.56.254
D.set route 0.0.0.0/0 interface 143.45.56.1 gate 143.45.56.254
Answer:B
certification Juniper JN0-522 JN0-522 examen certification JN0-522
NO.3 Click the Exhibit button. In the exhibit, if host A initiates a Web browsing session with host D, and the
E0/1 interface of the SSG 20 is in NAT mode, what will be the source address of the packet arriving at
host D?
A.10.1.1.1
B.10.1.10.5
C.143.45.56.1
D.143.45.56.254
Answer:C
Juniper examen JN0-522 examen JN0-522 examen JN0-522 JN0-522
NO.4 Your VPN tunnel does not pass traffic. You run the get ike cookie command and discover that there is no
cookie. Which two should be verified? (Choose two.)
A.routes
B.Phase 1 configuration options
C.Phase 2 configuration options
D.selected quick mode encryption algorithms
Answer:A B
certification Juniper JN0-522 examen JN0-522 JN0-522 examen
NO.5 What is the purpose of the "Permitted IP" address on a ScreenOS device?
A.It defines a list of addresses that are trusted to perform management on the ScreenOS device.
B.It is used in policy rules to determine which user traffic is allowed through the ScreenOS device.
C.It defines which range of addresses that can access devices connected to the ScreenOS device.
D.It is the address that an external device uses to gain management access to a ScreenOS device.
Answer:A
Juniper JN0-522 JN0-522 JN0-522 examen
NO.6 Assuming factory default settings, which statement describes the minimum requirements for WebUI
management access to the SSG 5?
A.Connect a PC addressed on the 192.168.1.0 subnet to any interface, open a browser and access
192.168.1.1.
B.Terminate the bootup sequence from the console device, open a browser on the console device and
access 192.168.1.1.
C.Connect a PC addressed on the 192.168.1.0 subnet, to the highest numbered interface and open a
browser and access 192.168.1.1.
D.Using the CLI, define an IP address on a physical interface, connect a PC to the interface and open a
browser to the interface address.
Answer:C
Juniper JN0-522 examen JN0-522 JN0-522 examen
NO.7 Which ScreenOS CLI command would be used to view traffic logs?
A.get traffic
B.get log policy
C.get policy log
D.get log traffic
Answer:D
certification Juniper JN0-522 JN0-522
NO.8 Which ScreenOS CLI command would be useful for troubleshooting a policy deny?
A.get flow debug
B.debug flow basic
C.exec flow analysis
D.debug session basic
Answer:B
certification Juniper JN0-522 JN0-522
NO.9 Click the Exhibit button. In the exhibit, which two forms of address translation would have generated
the output shown? (Choose two.)
A.MIP
B.NAT-src with no DIP
C.Interface-based translation
D.NAT-src with a DIP, fixed-port disabled
Answer:B C
Juniper certification JN0-522 certification JN0-522 JN0-522 examen
NO.10 Click the Exhibit button. In the exhibit, which routing command would allow host A to communicate with
host C? (Note: Assume a route from the SSG 20 to host A's subnet already exists.)
A.set route 0.0.0.0/0 int e0/3 gateway 177.11.56.254
B.set route 1.1.70.0 interface e0/3 gateway 177.11.56.254
C.configure route 1.1.70.0/24 gateway 177.11.56.254 int e0/3
D.set route 1.1.70.0/24 interface e0/3 gateway 177.11.56.254
Answer:D
Juniper examen JN0-522 certification JN0-522 JN0-522 JN0-522 certification JN0-522
NO.11 Click the Exhibit button. Traffic from the Internet to the partner servers must use a VIP. In the exhibit,
what is true about the configuration of this feature?
A.You cannot use a VIP in this environment.
B.The VIP can be configured on the e0/4 interface.
C.The VIP can be configured in the Corporate or Internet zone using a different subnet than the physical
interface.
D.The VIP will work only if the destination ports in the incoming packet headers are mapped to the same
ports in the Corporate zone.
Answer:A
Juniper examen JN0-522 JN0-522 examen
NO.12 Which ScreenOS CLI policy statement keyword would enable a policy only during specified times, days,
and/or dates?
A.at
B.calendar
C.schedule
D.scheduler
Answer:C
Juniper examen JN0-522 examen certification JN0-522
NO.13 You want to minimize the number of IP addresses, subnets, and policies in use. How should you
configure your tunnel interface?
A.Configure the tunnel interface with an IP address with a 32 bit subnet mask.
B.Configure the tunnel interface with an IP address with a 30 bit subnet mask.
C.Configure the tunnel interface as unnumbered and place the interface in the same zone as the
designated interface.
D.Configure the tunnel interface as unnumbered, but place the tunnel interface in a different zone than the
designated interface.
Answer:C
certification Juniper certification JN0-522 certification JN0-522 JN0-522
NO.14 Which command can you use to view the log of IKE negotiations and results?
A.get event type 536
B.get ike cookie
C.get sa active
D.debug ike basic
Answer:A
Juniper JN0-522 examen certification JN0-522 certification JN0-522
NO.15 What is the purpose of the VLAN1 interface?
A.It provides policy-based NAT for 802.1Q VLANs.
B.It provides an interface that can be used with 802.1Q VLANs in transparent mode.
C.It provides the ScreenOS device with a routable IP address while operating in route mode.
D.It provides an interface that can be used to remotely manage the ScreenOS device while operating in
transparent mode.
Answer:D
Juniper JN0-522 JN0-522 certification JN0-522
NO.16 Click the Exhibit button. In the exhibit, what is the correct address book entry for host C?
A.set address C 1.1.70.250/32
B.set address Partner C 1.1.70.250
C.set address Partner 1.1.70.250/32
D.set address Partner C 1.1.70.250/32
Answer:D
Juniper JN0-522 JN0-522
NO.17 What needs to be configured in Phase 2 of a route-based VPN, that does not need to be configured in a
policy-based VPN?
A.proxy-id
B.tunnel-binding
C.transport mode
D.custom proposals
Answer:B
Juniper examen JN0-522 JN0-522 JN0-522
NO.18 Which ScreenOS CLI command is required to enable a policy during specified times, days, or dates?
A.set time
B.set clock
C.set calendar
D.set scheduler
Answer:D
Juniper examen JN0-522 JN0-522 examen JN0-522 examen JN0-522
NO.19 You enter the following command: set int e0/8 mip 1.1.8.32 host 10.1.10.32 netmask 255.255.255.255
How many MIP address translations have you just configured?
A.1
B.8
C.128
D.256
Answer:A
certification Juniper JN0-522 JN0-522 JN0-522 JN0-522 certification JN0-522
NO.20 Which statement is correct about tunnel interfaces?
A.They can have overlapping IP addresses.
B.They need to be configured in the zone where the protected resources reside.
C.They can be unnumbered and used in policy-based translations if the interface is in route mode.
D.They can be unnumbered from any interface residing on the same virtual router as the protected
resources.
Answer:D
certification Juniper JN0-522 examen JN0-522 certification JN0-522 JN0-522 examen
Passer le test Juniper JN0-522, obtenir le Passport peut améliorer la perspective de votre carrière et vous apporter plus de chances à développer votre boulot. Pass4Test est un site très convenable pour les candidats de test Certification Juniper JN0-522. Ce site peut offrir les informations plus nouvelles et aussi provider les bonnes chances à se former davantage. Ce sont les points essentiels pour votre succès de test Certification Juniper JN0-522.
没有评论:
发表评论